Finally, a real steel over-cab rack sized for a mid-size truck. The Weather Guard 1345-52-02 brings the full 1,000 pound steel rack platform down to the compact beds of the Chevrolet Colorado, GMC Canyon, Ford Ranger and Nissan Frontier. It carries up to 1,000 pounds evenly distributed on formed steel, mounts with no drilling, and finishes in a matte black powder coat that stands up to weather and jobsite wear. Adjustable front legs dial in the fit to your bed length, a welded airfoil cuts wind drag, and side-member tie-downs plus leg loops give you plenty of anchor points for ladders and long stock.
What's Included:
Compact steel truck rack (front cross member, side rails and rear cross member)
Welded front airfoil wind deflector
Adjustable front legs and rear legs with mounting feet
Removable rear cross member pins
Tie-down loop on each leg plus four side-member tie-down points
Rear handle bars for climbing on and off the truck
No-drill installation kit for 2016 and newer Chevrolet and GMC trucks
Protective tape to guard ladders in transit
Stake-pocket and clamp mounting hardware
Weather Guard assembly and installation instructions
Features
Sized For Mid-Size Beds This is the compact version of Weather Guard's steel truck rack, built to fit the shorter, narrower beds of the Chevrolet Colorado, GMC Canyon, Ford Ranger from 2019 and up, and the Nissan Frontier. You get a true jobsite ladder rack that actually fits a mid-size truck instead of a full-size rack that hangs off the sides.
1,000 lb Steel Capacity The formed steel frame carries up to 1,000 pounds evenly distributed, so it handles extension ladders, lumber, pipe and conduit on a smaller truck. It brings full-size rack strength to a compact bed.
True No-Drill Install The rack mounts with a combination of stake-pocket and clamp attachments, so you do not drill your bed rails. A no-drill kit is included for 2016 and newer Chevrolet and GMC trucks. That protects the bed from rust and keeps the rack easy to remove or move to your next truck.
Welded Airfoil and Adjustable Legs A built-in welded airfoil on the front cross member reduces air resistance and cuts wind noise at highway speed. The front legs adjust to match your bed length, so the crossbars line up right over the cab and tailgate.
Tie-Downs All Around Each leg has a built-in tie-down loop and the side members add four more anchor points, so you can strap loads down from several angles. Long, awkward loads stay put on the highway and on rough site roads.
Built For Loading and Climbing Removable pins on the rear cross member let you pull that bar in seconds to drop in tall or bulky loads, and rear handle bars make it easier to climb on and off the truck. Included protective tape keeps your ladders from rubbing the matte black steel in transit.
Fitment & Compatibility
Truck Class
Example Trucks
Fit
Chevrolet Colorado and GMC Canyon
compact bed
✓ Yes, designed fit
Ford Ranger
2019 and newer
✓ Yes, designed fit
Nissan Frontier
-
✓ Yes, designed fit
Toyota Tacoma
-
✗ Not listed by Weather Guard, confirm a standard stake-pocket bed before ordering
Full-size 1/2-ton, 3/4-ton and 1-ton pickups
-
✗ No, use the full-size steel rack (1275 or the heavy-duty 1175)
Fit guidance: This is the compact and mid-size version of Weather Guard's steel truck rack. Weather Guard designs it for the compact beds of the Chevrolet Colorado, GMC Canyon, Ford Ranger from 2019 and newer, and the Nissan Frontier. The Toyota Tacoma is not on Weather Guard's named fit list for this rack, so confirm your bed has standard stake pockets before ordering. The front legs adjust for bed length and the rack mounts with a no-drill combination of stake-pocket and clamp attachments, with an included no-drill kit for 2016 and newer Chevrolet and GMC trucks. It rides over the cab, so check garage and drive-thru clearance, and keep loads strapped and within the 1,000 lb evenly distributed limit. For full-size trucks use the 1275 or heavy-duty 1175 instead.
Specifications
Load Capacity: 1,000 lb, evenly distributed
Type: Compact and mid-size over-bed steel truck rack
Material: Steel
Finish: Matte Black powder coat
Designed To Fit: Chevrolet Colorado, GMC Canyon, Ford Ranger (2019 and newer), Nissan Frontier
Front Legs: Adjustable for bed length
Airfoil: Welded front airfoil to reduce air resistance
Mounting: No-drill, combination of stake-pocket and clamp attachments; no-drill kit for 2016 and newer Chevrolet and GMC
Tie-Down Points: Loop on each leg plus four points on the side members
Rear Cross Member: Removable pins for quick take-off and loading
Rear Handle Bars: Yes, for climbing on and off the truck
Ladder Protection: Protective tape included
Warranty: Limited Lifetime
Shipping Weight: About 156 lb
Assembled Dimensions: 127-3/4"L x 66-1/4"W x 33-3/8"H
Shipping Dimensions: About 70-1/2"L x 20-3/8"W x 9-1/4"H, ships knocked down
Mounting Method: No-drill clamp
Install Time: About 1 hour
Made In: China
Installation
Type: No-drill bed mount, stake-pocket and clamp attachments · Time: About 1 hour · Tools: Basic socket and wrench set; no drilling required on trucks with standard stake pockets · Difficulty: Easy to moderate, a second person helps when lifting and setting the rack
Assemble the legs, side rails and cross members, set the rack into the bed, and secure it with the stake-pocket and clamp attachments so nothing is drilled. On 2016 and newer Chevrolet and GMC trucks use the included no-drill kit. Slide the front legs to match your bed length so the crossbars sit over the cab, apply the protective tape where ladders will rest, then load and strap using the leg loops and the four side-member tie-downs. Follow the Weather Guard steel truck rack instructions for placement and torque, and re-check the mounts after the first loaded drive.
Watch the installation walkthrough:
Warranty, Shipping & Returns
Warranty. Limited Lifetime Warranty from Weather Guard against defects in materials and workmanship.
Free shipping. This item ships free to the lower 48 states. Because it is an oversized item, it ships by freight and typically arrives in 3 to 7 business days.
Inspect on delivery. Please inspect the packaging before signing. If you see any damage, note it on the delivery receipt and contact us right away, and we will make it right.
About Weather Guard
Weather Guard has built professional-grade truck and van storage in the USA for decades and is the storage brand tradespeople, contractors, and fleets reach for first. Its steel and aluminum tool boxes, ladder racks, and van-interior systems are engineered to survive daily jobsite abuse and keep expensive tools secure and organized.
Known for weather-tight seals, patented locking systems, and heavy-gauge construction, Weather Guard products mount cleanly on work trucks and vans and stand up to years of hard use. The lineup spans crossover, low-side, and saddle truck boxes, ladder and van racks, drawer units, and fuel and utility tanks, so an entire work vehicle can be outfitted from one brand.
Backed by a strong manufacturer warranty and US-based support, Weather Guard is the name pros trust to protect the tools their livelihood depends on.
Authorized Weather Guard dealer. Prestige Truck is an authorized dealer of Weather Guard, so every tool box, rack and storage product you buy is 100% genuine and factory-new, covered by the full Weather Guard manufacturer warranty, and backed by our own US-based support team.
Compare The Range
How this compares to similar models
The closest alternatives side by side, so you do not have to keep tabs open.
Model
This OneWeather Guard Compact Steel Truck Rack, 1,000 lb, Matte Black (1345-52-02)
Weather Guard's Defender Series install video shows the lightweight aluminum truck rack going onto a pickup with no drilling required. You see the compression clamps grip the bed rails and the crossbars set up to carry ladders, lumber and pipe, rated to about 800 pounds. It makes clear how quickly the rack mounts and how the ladder stops keep a load in place. It is a helpful look at the rack in place before you buy or install your own.
Weather Guard Headache Rack Install Guide
Weather Guard's step-by-step guide covers mounting a headache rack, also called a cab protector, behind the cab. You see how the rack bolts up to shield the back window from shifting ladders, lumber and cargo. It walks through the hardware and placement so the rack sits square and solid. Coming straight from the manufacturer, it is the most reliable reference for installing and understanding the rack.
Best Upgrade for Your Truck
This is Weather Guard's own brand film about outfitting a working pickup, built on the idea that the truck should already be loaded and organized before the day starts. It puts the bed and rail equipment in the context of a real work day rather than a spec sheet.
Watch it if you are still deciding how much storage a truck actually needs. It is the clearest short look at how Weather Guard boxes, racks and drawer units are meant to work together on one vehicle, and it comes straight from the manufacturer rather than a reseller.
Frequently Asked Questions
Straight answers on specs, fit and support
Which trucks does the 1345 fit?
Weather Guard designs it for compact and mid-size beds, specifically the Chevrolet Colorado, GMC Canyon, Ford Ranger from 2019 and newer, and the Nissan Frontier. The front legs adjust to match your bed length. The Toyota Tacoma is not on Weather Guard's named list for this rack, so confirm your bed has standard stake pockets first. Full-size trucks should use the 1275 or heavy-duty 1175 instead.
How much weight can it carry?
The compact steel rack is rated for up to 1,000 pounds evenly distributed, the same capacity as the full-size steel rack. Spread heavy loads across the crossbars, strap them at several points, and stay within that limit for safe hauling on a mid-size truck.
Do I need to drill holes in my truck?
No. The rack mounts with a no-drill combination of stake-pocket and clamp attachments, and a no-drill kit is included for 2016 and newer Chevrolet and GMC trucks. That keeps your bed rails intact and rust-free and makes the rack easy to remove or move to another truck later.
How many tie-down points does it have?
Every leg has a built-in tie-down loop and the side members add four more anchor points, so you can strap ladders and long stock down from several angles. The rear cross member also has removable pins so you can pull that bar to load tall or bulky items.
Will it be noisy at highway speed?
A welded airfoil on the front cross member reduces air resistance and cuts the wind noise and buffeting that come from an open rack. That helps on longer drives between jobs with a load up top.
What is it made of and is it covered by a warranty?
It is built from formed, welded steel tubing with a matte black powder coat that resists sun, salt and scrapes, and it is backed by a Weather Guard Limited Lifetime Warranty against defects in materials and workmanship.
Mark K.
Look is great. 100 lbs
Look is great. 100 lbs lighter than my 2nd pick. Lid lock and opening are smooth. Only minor knock I give is the the tie down hooks are hard to install - thinking I should have done them before installing.
DECKED Tool Box, Full-Size Truck Crossbed, 71.7" x 25.5" x 16", 300 lb Lid / 800 lb Tub, Black (DTB2-BLK)
Mark
A must have
I really like this mat. I was apprehensive at first but, the mat does a great job of keeping things from sliding around without having to secure it. perfect fit. But i think i will be adding some short screws to secure the mat to the DECKED system.
DECKED Battle Mat, Full-Size Long Drawer System 6'4" to 6'9" Bed, Recycled Nyracord Rubber, Black (A0075-BMXL-BLK)
Roy L.
I never knew how much I needed this
As with all BAK covers, the quality is amazing. What I didnt fully appreciate until installing was the ease of opening - especially in a lifted truck. No more need to find the right handhold. Just roll it back with a single hand. Its also great to see out of my rear window when fully open - something you lose with the fold back covers. Customer service is awesome. I has an installation question and the representative stayed on the line as I adjusted an alignment to ensure I did it properly.
BAK Revolver X4s Hard Roll-Up Tonneau Cover for 2022-2026 Toyota Tundra (6'7" Bed)
Jeffrey P.
Better then expected.
Searched for about 6 months to find the tonneau cover. I really wanted the security of a hard top without sticking above the bed rails it checked those boxes. I also did not want to drill my truck bed. The install was super simple my wife and I had it on the truck in about a half an hour.
BAKFlip MX4 Hard Folding Tonneau Cover for 2003-2025 Ram 1500 / 2500 / 3500 (8' Bed)
Joseph A.
The toolbox is nice. I
The toolbox is nice. I think Ill get a lot of years of service out of it. I like how the lid opens and the tie downs are a nice touch. It seems to be well built. And tough. Im pleased with my purchase and would buy another one.
DECKED Tool Box, Full-Size Truck Crossbed, 71.7" x 25.5" x 16", 300 lb Lid / 800 lb Tub, Fender Dirt (DTB2-TAN)
Weather Guard Compact Steel Truck Rack, 1,000 lb, Matte Black (1345-52-02)
Weather Guard Aluminum Single-Side Service Body Ladder Rack, 200 lb, Brite White (1425-3)
Weather Guard Heavy-Duty Full-Size Steel Truck Rack, 1,700 lb, Matte Black (1175-52-02)
Weather Guard WEEKENDER Single-Side Steel Ladder Rack, 250 lb, Black (1450)
