Access LiteRider Soft Roll-Up Tonneau Cover for 2008-2014 Nissan Titan (7'3" Bed, with or without Utili-Track)
Free gifts included with your order
- Guaranteed FitmentTeam-confirmed fit or money back
- No Sales TaxZero sales tax on every order
- 30-Day Money-Back GuaranteeReturn it within 30 days of delivery for a refund
Questions or a custom quote?
Mon to Fri, 9am to 5pm EST
Complete your upgrade
Fits the same truck
See it on a truck
Features
- Rides 1-1/2" Above the Bed: The LiteRider sits 1-1/2" over the bed rails, the same height as the Original, and Access says that rise leaves a little more room for cargo under the cover. Black aluminum bars and side rails carry silver bows: two on most beds, three on most long beds.
- Rolls to the Cab, Clipped: One person can roll the cover up toward the cab and open the whole bed. Quick Clip nylon straps with buckles hold the roll behind the cab, and Access says that is all it takes to hitch a fifth wheel.
- No-Drill Tight Bite Clamps: Six toothed clamps bite into grooves on the side rails and hold them inside the bed walls, with no drilling on most trucks. A few trucks bolt on or need a special sheet instead; the child page names it.
- AutoLatch Plus a Slide Lock: Pull the cord on the driver side to free the rear bar; press the bar down to close and the AutoLatch catches by itself. On the passenger side, a slide lock beneath the rear bar pushes in to lock and pulls out to open.
- EZ-Dial Tension, No Tools: Hand dials on the front bar take up slack as the vinyl settles in. Turn both the same amount, counterclockwise to tighten. Access says a cover kept drum tight runs quieter, lasts longer and is less likely to hold standing water.
- Sealed on All Four Sides: Front and rear vinyl seals, foam on both side rails and corner seals at the front wall close off the bed, and a 1-1/2" hook-and-loop strip seals each side for its full length. It is weather-resistant, not waterproof; Access notes some moisture and dust can still get in.
Description & Fitment
The Access LiteRider is a soft roll-up tonneau cover for the 2008-2014 Nissan Titan with the 7'3" bed, with or without Utili-Track. It suits owners who want a roll-up that rides about 1-1/2" above the bed and is sealed on all four sides. No-drill Tight Bite clamps hold it on, and EZ-Dial tension adjusts without tools. A self-latching AutoLatch rear bar with a slide lock secures it, and it rolls to the cab and clips for full bed access.
Fitment & Compatibility
| Years | Model | Bed | Notes |
|---|---|---|---|
| 2008-2014 | Titan | 7'3" | with or without Utili-Tracks |
Check your bed: Measure inside the bed floor from the bulkhead to the closed tailgate. This part is for the 7'3" box. If a bed extender hits the side rails, Access's optional Titan adapter kit 30298 (sold separately) is the fix.
Not for: other bed lengths or generations of these trucks. Not confirmed: 2015-2016 Nissan Titan.
About Access
Access roll-up covers come from Agri-Cover, Inc. of Jamestown, North Dakota, which says its covers are built there. Agri-Cover says it introduced the first roll-up tonneau cover, the Access Original, in 1991; it also makes LOMAX hard covers, truck racks and farm roll tarps.
Access calls the LiteRider its best-value truck bed cover. It keeps the Original's 1-1/2" height, Slantback rear bar and 1-1/2" hook-and-loop, then keeps the price down with a single AutoLatch and a passenger-side slide lock, EZ-Dial adjusters, silver bows, Quick Clip straps, the bulkhead gasket as an option and a 3-year warranty.
Authorized Access dealer. Agri-Cover sells Access covers through what it calls "Authorized Dealers all across the country" and "authorized online retailers." Your Access LiteRider carries Agri-Cover's 3-year limited warranty.
Frequently Asked Questions
Will this fit my 2008-2014 Nissan Titan?
Yes, if it has the 7'3" box (with or without Utili-Tracks). Measure inside the bed floor from the bulkhead to the closed tailgate and match it to the label. If you're unsure, send us your VIN and we'll check.
Does it fit a 2015-2016 Nissan Titan?
Not confirmed. This part is verified for the trucks listed in the fitment table; the 2015-2016 Nissan Titan is not on the verified list. Send us your VIN before ordering.
How is the LiteRider different from the Original?
Both ride 1-1/2" above the bed rails with a Slantback rear bar and a 1-1/2" hook-and-loop strip. Access calls the LiteRider its best-value cover: it has one AutoLatch released from the driver side plus a passenger-side slide lock, EZ-Dial adjusters, silver bows, Quick Clip straps, the bulkhead gasket as an option and a 3-year warranty. The Original adds AutoLatch II latches you release from either side, XT-Dial adjusters, an all-black frame, a standard Element Seal gasket and 5 years of cover.
Will it keep rain and snow out of the bed?
It is built to keep most of it out: seals at the front and rear, foam between the rails and the bed, corner seals at the front wall and hook-and-loop down both sides. Access's own sheet says no cover stops all moisture and dust, so wrap cargo that must stay dry and seal any factory holes or stake pockets. Brush snow off before you roll it up.
Does the cover lock?
The AutoLatch catches every time you close the cover, and the passenger-side slide lock beneath the rear bar adds a second hold; pull it out before you open the cover. Access says that with a locking tailgate the bed becomes a secure unit. It is a deterrent rather than a safe, so don't leave valuables in an unattended truck.
Will it work with my bed liner?
Usually, yes. Access lists spray-in liners, bed mats and most under-the-rail drop-in liners as compatible. Its sheet says an under-the-rail drop-in needs a little trimming at the front corners and near the tailgate, while an over-the-rail drop-in needs a lot more. On a spray-in liner, smoothing the front wall helps the corner seals stick.
Installation
- Two 1/2" wrenches
- Torque wrench with a 1/2" socket
- Tape measure
- Marking pen
- Scissors
- Safety glasses
- 1/8" Allen wrench for the slide lock
Here's the short version. Follow Access's install sheet (below) for your truck's exact clamp positions, plus any special sheet your truck needs.
- Clamp the side rails. Set each rail with its weather strip against the inside lip of the bed, pushed forward to the front wall with the nylon strike at the tailgate end (long beds join the two rail sections first). Hold the front flush with the top of the bed, then clamp near the front, at the middle and by the tailgate with the teeth in the rail grooves and the rail level, and torque every clamp to 20 ft-lb or the value on your truck's special sheet.
- Stick on the front corner seals. With the air and surface above 60°F, wipe the top of the front wall with the alcohol pad and keep the pad for the next step. Peel and stick a seal in each front corner, just ahead of the rail, with the raised side against the inside edge of the bed.
- Add the rear seals. Wipe the underside of each rail end with the saved pad and hold a seal so its end meets the edge of the bed. Mark and notch the seal's leg, then stick a seal to the tailgate end of both rails.
- Attach the tension adjusters. Set the pre-rolled cover on the tailgate with the front bar facing up. Thread the left (L) and right (R) adjusters onto the front bar with their bolts and flat washers, and leave both loose.
- Mount the cover to the rails. Set the cover at the front of the bed and roll the front bar onto the rails, tucking the vinyl flap under it, with the alignment tabs against the front wall. Bolt each adjuster under its rail without turning the dial, center the front bar so the gap is equal on both sides, then tighten the adjuster bolts with each support tab under its rail.
- Close, check and fine-tune. Unroll the cover, set the rear bar in the strikes and press it down. Close the tailgate slowly and raise or lower the rails at the rear until it sits snug under the rear bar, then re-check each clamp's torque from the cab back. The bar should snap shut with no sag between the bows; if not, roll the cover open, turn both dials the same amount (counterclockwise tightens) and seal both sides with the hook-and-loop.
- LITERIDER Roll-Up Cover Installation Instructions 2000226 (long box, typically 78" or longer) (PDF)
- 04-ON Nissan Titan, Clamp Instructions with or without Utili-Track 50321 (PDF)
Stuck on a step?
- Pre-rolled cover assembly with front bar, rear bar, support bows, storage straps, AutoLatch and slide lock
- Driver and passenger side rails (two-piece rails on long beds)
- 6 Tight Bite clamps
- Left and right tension adjusters with nuts and bolts
- 2 front corner seals and 2 rear seals
- Alcohol prep pad
Specifications
| Brand | Access (Agri-Cover, Inc.) |
|---|---|
| Part Number | ACC33199 |
| Cover Type | Soft roll-up |
| Cover Material | Textured vinyl, reinforced, commercial grade, UV protected |
| Color | Black |
| Cold Weather | Vinyl stays flexible to -40°F |
| Profile | 1-1/2" above the bed rails |
| Frame | Black aluminum bars and side rails; 2 silver bows (3 on most long beds) |
| Latch | AutoLatch, driver-side pull cord, latches automatically on closing |
| Slide Lock | 1, passenger side, beneath the rear bar |
| Tension Control | EZ-Dial tension adjusters, no tools |
| Sealing | Front and rear vinyl seals, side-rail foam, bulkhead corner seals; Element Seal bulkhead gasket optional, sold separately |
| Side Closure | 1-1/2" slide-in hook and loop |
| Rear Bar | Slantback rear design |
| Storage Straps | Quick Clip nylon straps with buckles |
| Mounting | 6 Tight Bite clamps, no drilling on most trucks |
| Built In | Jamestown, North Dakota, USA |
| Bed Length | 7'3" |
| UPC | 834532009671 |
More media
6 videosWarranty, shipping & returns
-
Warranty
Agri-Cover, which makes Access covers, gives the LiteRider a 3-year limited warranty against defects in material and workmanship, under normal use on the truck model the cover was made for.- The 3 years run from the date you received the cover or its date of manufacture.
- Agri-Cover repairs or replaces defective parts, at its option. No labor or service allowance is included, and incidental or consequential damages are not covered.
- Not covered: ordinary wear and tear, or damage caused by an accident, abuse, misuse, neglect, an alteration or a faulty installation.
- To make a claim or get registration help, email support@prestigetruck.com with your order number and the serial number (it is on a decal under the rear bar by the tailgate); we handle the claim with Agri-Cover.
- If Agri-Cover needs the cover back for inspection, we arrange the return authorization (RA); you ship it freight prepaid, and Agri-Cover pays the freight to send it back.
-
Free shipping
Ships free to the lower 48 states, with no minimum order.- Order by 5 PM ET on a business day and it starts processing the same day.
- The rolled cover ships in a long box, by freight or oversized parcel carrier depending on its size.
- Most orders arrive within 1-5 business days.
- We email your tracking number as soon as it ships.
-
Inspect on delivery
This roll-up cover ships in a long box. Check it as soon as it arrives.- Look for crushed ends, punctures or tears in the carton.
- If something looks wrong, take photos of the box and the parts (and if a driver asks you to sign, note the damage on the receipt).
- Open the box and check the parts against the parts list before you install.
- Email support@prestigetruck.com right away with your order number, a short note and photos. We send a replacement or a full refund at no cost to you.
-
30-day returns
Return it within 30 days of delivery, unused, in the original packaging, with proof of purchase.- Email support@prestigetruck.com with your order number. We reply within 1-2 business days with instructions.
- Damaged, defective or wrong item: we send a prepaid label or arrange a pickup.
- Changed your mind: you pay return shipping. No restocking fee.
- Refunds go back to your original payment method within 7 business days of approval. See our returns policy.