Access Original Soft Roll-Up Tonneau Cover for 2007-2013 Chevrolet Silverado/GMC Sierra 1500 (5'9" Bed, GM 5'8" Short Box, 2007 New Body)
Free gifts included with your order
- Guaranteed FitmentTeam-confirmed fit or money back
- No Sales TaxZero sales tax on every order
- 30-Day Money-Back GuaranteeReturn it within 30 days of delivery for a refund
Questions or a custom quote?
Mon to Fri, 9am to 5pm EST
Complete your upgrade
Fits the same truck
See it on a truck
Latches itself shut
Hook-and-loop side seal
Features
- AutoLatch II Locks Itself Shut: Pull the release cord from either side and both latches let go together. Press the rear bar down to close the cover, and the heavy-duty nylon latches catch under the side rails on their own with 1/2" of latch contact.
- XT-Dial Tension, No Tools: Hand dials on the front bar set how tight the vinyl sits. Turn both by the same amount to take up slack as the cover settles in. Access says a cover kept drum tight is less likely to collect standing water.
- Sealed on All Four Sides: Front and rear vinyl seals, foam on both side rails, an Element Seal gasket across the front of the bed and extra seals in the rear corners. Like any soft cover it is weather-resistant, not waterproof; Access notes some moisture and dust can still get in.
- Hook-and-Loop Side Closure: A 1-1/2" slide-in hook strip runs the length of each side and presses against the angled rail to close the edge. Seal both sides the full length every time you close the cover.
- Rolls to the Cab, Strapped: One person can roll the cover up toward the cab and open the whole bed. Nylon storage straps with a cab-guard buckle hold the roll in place and keep it off the cab, then clip away underneath when the cover is closed.
- No-Drill Tight Bite Clamps: Toothed clamps bite into grooves on the side rails and hold them inside the bed walls, with no drilling on most trucks. Most short beds use 6 clamps and long beds 8; some trucks also need a special instruction sheet.
Description & Fitment
The Access Original is a soft roll-up tonneau cover for 2007 New Body through 2013 Chevrolet Silverado 1500 and GMC Sierra 1500 pickups with the 5'9" bed, which GM calls the 5'8" short box. It suits owners who want a roll-up that is sealed on all four sides and closes with hook-and-loop sides. No-drill Tight Bite clamps hold it on, and XT-Dial tension adjusts without tools. AutoLatch II nylon latches lock it shut when the rear bar is pressed down, and it rolls to the cab and straps in place.
Fitment & Compatibility
| Years | Model | Bed | Notes |
|---|---|---|---|
| 2007-2013 | Silverado 1500 | 5'9" |
| Years | Model | Bed | Notes |
|---|---|---|---|
| 2007-2013 | Sierra 1500 | 5'9" |
Check your bed: Measure inside the bed floor from the bulkhead to the closed tailgate. This part is for the 5'9" box.
Not for: the 1999-2007 Silverado 1500/Silverado 1500 Classic/Sierra 1500 6'6" box (12199); the 2007-2013 Silverado 1500/Sierra 1500 6'7" box (12289); the 2007-2013 Silverado 1500/Sierra 1500 8' Long Box (12299); the 1999-2006 Silverado 1500/Sierra 1500 8' Long Box (12189).
About Access
Access roll-up covers come from Agri-Cover, Inc. of Jamestown, North Dakota, which says its covers are built there. Agri-Cover says it introduced the first roll-up tonneau cover, the Access Original, in 1991; it also makes LOMAX hard covers, truck racks and farm roll tarps.
The Original is where the Access roll-up range starts, riding 1-1/2" over the rails. Its siblings change one thing each: the Lorado drops to 1", and the Toolbox Edition begins behind an over-the-rail toolbox. All three keep the AutoLatch II latches, XT-Dial adjusters and Slantback rear bar.
Authorized Access dealer. Agri-Cover sells Access covers through what it calls "Authorized Dealers all across the country" and "authorized online retailers." Your Access Original carries Agri-Cover's 5-year limited warranty.
Frequently Asked Questions
Will this fit my 2007-2013 Chevrolet Silverado/GMC Sierra 1500?
Yes, if it has the 5'9" box. Measure inside the bed floor from the bulkhead to the closed tailgate and match it to the label. If you're unsure, send us your VIN and we'll check.
How do I tell the 5'9" box from the other boxes?
Measure inside the bed floor from the bulkhead to the closed tailgate and match it to the label: this part is the 5'9" box, and the 1999-2007 Silverado 1500/Silverado 1500 Classic/Sierra 1500 6'6" box (12199) is a different part. If you're unsure, send us your VIN and we'll check.
How is the Original different from the Lorado?
The Original rides 1-1/2" above the bed rails, and the Lorado sits lower at 1". Both use the AutoLatch II latches, XT-Dial adjusters, four-side sealing and Slantback rear bar, and both carry a 5-year limited warranty.
Will it keep rain and snow out of the bed?
It is built to keep most of it out: seals on all four sides, foam between the rails and the bed and a gasket at the front. Access's own manual says no cover stops all moisture and dust, so pack anything that must stay dry in its own wrap and seal any factory holes or stake pockets. Brush snow off before you roll it up.
Does the cover lock?
The latches engage on their own every time you close it, and the release cord is reached from the tailgate. Access says that with a locking tailgate the bed becomes a secure unit. It is a deterrent rather than a safe, so don't leave valuables in an unattended truck.
Will it work with my bed liner?
Usually, yes. Access lists spray-in liners, bed mats and most under-the-rail drop-in liners as compatible. Its sheet says an under-the-rail drop-in needs a little trimming at the front corners and near the tailgate, while an over-the-rail drop-in needs a lot more.
Installation
- Two 1/2" wrenches
- Torque wrench with a 1/2" socket
- Tape measure
- Marking pen
- Scissors
- Safety glasses
Here's the short version. Follow Access's install sheet (below) for your truck's exact clamp positions, plus any special sheet your truck needs.
- Clamp the side rails. Set each rail against the inside lip of the bed, pushed forward to the front wall with the nylon strike at the tailgate end (long beds join the two rail sections first). Hold the front flush with the top of the bed, then clamp from front to back with the clamp teeth in the rail grooves and the rail level, and torque each clamp to 20 ft-lb or the value on your truck's special sheet.
- Fit the bulkhead seal gasket. With the air and surface above 60°F, wipe the top of the front wall with the alcohol pad. Peel and stick the gasket from the front of one rail to the opposite corner, raised side along the inside edge of the bed, and trim it to length.
- Add the rear seals. Clean the underside of each rail end, mark and notch the rear seal's leg, then stick a seal to the tailgate end of both rails.
- Attach the tension adjusters. Set the pre-rolled cover on the tailgate with the front bar facing up. Thread the left (L) and right (R) adjusters onto the front bar and leave both bolts loose.
- Mount the cover to the rails. Set the cover at the front of the bed and roll the front bar onto the rails with the vinyl flap tucked under it. Bolt each adjuster under its side rail without turning the dial, center the front bar between the rails, then tighten the adjuster bolts.
- Close, check and fine-tune. Unroll the cover and press the rear bar into the strikes. Close the tailgate and raise or lower the rails at the rear until the tailgate fits snug under the rear bar, re-check the clamp torque, even out the tension with the dials (counterclockwise tightens) and seal both sides with the hook-and-loop.
- ACCESS Original Roll-Up Cover Installation Instructions 50213 (short/standard box) (PDF)
- 07-19 Chevy/GMC Full Size, Clamp Instructions 50128 (PDF)
Stuck on a step?
- Pre-rolled cover assembly with front bar, rear bar, support bows and dual latches
- Driver and passenger side rails (two-piece rails on long beds)
- Tight Bite clamps (6 or 8, by bed length)
- Left and right tension adjusters with nuts and bolts
- Seal gasket and 2 rear seals
- Alcohol prep pad
Specifications
| Brand | Access (Agri-Cover, Inc.) |
|---|---|
| Part Number | ACC12309 |
| Cover Type | Soft roll-up |
| Cover Material | Textured vinyl, reinforced, commercial grade, UV protected |
| Color | Black |
| Cold Weather | Vinyl stays flexible to -40°F |
| Profile | 1-1/2" above the bed rails |
| Frame | Black aluminum side rails, bars and 3 bows |
| Latch | AutoLatch II dual locking system, heavy-duty nylon latches, 1/2" latch engagement |
| Tension Control | XT-Dial tension adjusters, no tools |
| Sealing | Front and rear vinyl seals, side-rail foam, Element Seal bulkhead gasket, rear corner seals |
| Side Closure | 1-1/2" slide-in hook and loop |
| Rear Bar | Slantback rear design |
| Storage Straps | Nylon, cab-guard buckle design |
| Mounting | Tight Bite clamps, no drilling on most trucks (6 on most short beds, 8 on long beds) |
| Built In | Jamestown, North Dakota, USA |
| Bed Length | 5'9" |
| UPC | 834532007417 |
More media
9 videosWarranty, shipping & returns
-
Warranty
Agri-Cover, which makes Access covers, gives the Access Original a 5-year limited warranty against defects in material and workmanship, under normal use on the truck model the cover was made for.- The 5 years run from the date you received the cover or its date of manufacture.
- Agri-Cover repairs or replaces defective parts, at its option. No labor or service allowance is included, and incidental or consequential damages are not covered.
- Not covered: ordinary wear and tear, or damage caused by an accident, abuse, misuse, neglect, an alteration or a faulty installation.
- To make a claim or get registration help, email support@prestigetruck.com with your order number and the serial number (it is on a decal under the rear bar by the tailgate); we handle the claim with Agri-Cover.
- If Agri-Cover needs the cover back for inspection, we arrange the return authorization (RA); you ship it freight prepaid, and Agri-Cover pays the freight to send it back.
-
Free shipping
Ships free to the lower 48 states, with no minimum order.- Order by 5 PM ET on a business day and it starts processing the same day.
- The rolled cover ships in a long box, by freight or oversized parcel carrier depending on its size.
- Most orders arrive within 1-5 business days.
- We email your tracking number as soon as it ships.
-
Inspect on delivery
This roll-up cover ships in a long box. Check it as soon as it arrives.- Look for crushed ends, punctures or tears in the carton.
- If something looks wrong, take photos of the box and the parts (and if a driver asks you to sign, note the damage on the receipt).
- Open the box and check the parts against the parts list before you install.
- Email support@prestigetruck.com right away with your order number, a short note and photos. We send a replacement or a full refund at no cost to you.
-
30-day returns
Return it within 30 days of delivery, unused, in the original packaging, with proof of purchase.- Email support@prestigetruck.com with your order number. We reply within 1-2 business days with instructions.
- Damaged, defective or wrong item: we send a prepaid label or arrange a pickup.
- Changed your mind: you pay return shipping. No restocking fee.
- Refunds go back to your original payment method within 7 business days of approval. See our returns policy.