BAK Revolver X2 Hard Roll-Up Tonneau Cover for 2014-2019 Chevy Silverado / GMC Sierra 1500/2500/3500 (8' Bed)
Free gifts included with your order
- Guaranteed FitmentTeam-confirmed fit or money back
- No Sales TaxZero sales tax on every order
- 30-Day Money-Back GuaranteeReturn it within 30 days of delivery for a refund
Questions or a custom quote?
Mon to Fri, 9am to 5pm EST
Complete your upgrade
Fits the same truck
See it on a truck
Features
- Locks Down From Both Sides: Patented rotational locking rails and automatic slam latches hold the closed cover down to resist prying, slicing and forced entry. BAK calls it the most secure roll-up in its class and rates it Level-3, its highest security level.
- Slash-Resistant Aluminum Slats: Patented interlocking aluminum slats sit under the vinyl, so the top can't simply be cut open. BAK rates the closed cover at 400 lb spread evenly, and with no canister you keep the whole bed.
- Full Bed Access, Clear View: Roll it to the cab with PrecisionRoll, buckle the two straps and drive with 100% of the bed open, without blocking the rear window or the factory cameras.
- One Piece, No Seams: One-piece aluminum-reinforced vinyl with flush-fitting side seals. BAK calls it the most leakproof of all folding, roll-up and retractable covers; BAK's own sheet also notes the cover is not airtight.
- Sits Nearly Flush: BAK calls it the lowest-profile hard roll-up: it sits nearly flush with the bed rails for a built-in look.
- DualShield 60-Grade Vinyl: The top is BAK's DualShield 60-grade vinyl over rigid aluminum slats, soft to the touch like a soft cover, with an added layer of durability.
Description & Fitment
Owners of the 2014-2018 Chevy Silverado / GMC Sierra 1500 and 2015-2019 Chevy Silverado / GMC Sierra 2500 HD and 3500 HD with the 8' bed get a Revolver X2 matched to that exact box. Rolled up, it stays behind the cab on two straps, leaving 100% of the bed open and the rear window clear. On the 2008-2013 Chevy Silverado 1500, the same bed takes Revolver X2 39102 instead. You won't need a drill for this truck; the rails clamp in place.
Fitment & Compatibility
| Years | Model | Bed | Notes |
|---|---|---|---|
| 2014-2018 | Silverado 1500 | 8' | — |
| 2015-2019 | Silverado 2500 HD | 8' | — |
| 2015-2019 | Silverado 3500 HD | 8' | — |
| Years | Model | Bed | Notes |
|---|---|---|---|
| 2014-2018 | Sierra 1500 | 8' | — |
| 2015-2019 | Sierra 2500 HD | 8' | — |
| 2015-2019 | Sierra 3500 HD | 8' | — |
Check your bed: measure along the bed rail from the bulkhead to the inside of the closed tailgate. This part is for the 8' bed on the 2014-2018 Chevy Silverado / GMC Sierra 1500 and 2015-2019 Chevy Silverado / GMC Sierra 2500 HD and 3500 HD; BAK lists the bed by that label and publishes no inch figure.
Not for: the 6'6" bed (Revolver X2 39121, 2014-2019) and the 5'8" bed (Revolver X2 39120, 2014-2018). 2008-2013 Chevy Silverado 1500 trucks with the same bed use Revolver X2 39102. 2019 Chevy Silverado 1500 trucks with the same bed use Revolver X2 39132.
About BAK Industries
BAK makes hard tonneau covers. BAK bills itself as "America's #1 truck bed cover."
The range splits into BAKFlip hard folding covers (MX4, MX4 EZ-Lift, MX4 TS, G2, F1 and Fibermax) and Revolver hard roll-ups (X2, X4s and X4ts). The Revolver X2 is the value entry to the Revolver roll-ups.
Authorized BAK dealer. Prestige Truck is an authorized BAK dealer, so what we sell is new and genuine BAK. BAK's warranty "is nontransferable and applies to the original purchaser of the BAK product only," and BAK requires warranty registration on file or proof of original purchase (a detailed, dated receipt) for warranty service. Your Prestige Truck order receipt is that proof.
Frequently Asked Questions
Will this fit my 2014-2018 Silverado or Sierra 1500?
Yes, if it has the 8' bed. It fits the 2014-2018 Chevy Silverado / GMC Sierra 1500 and 2015-2019 Chevy Silverado / GMC Sierra 2500 HD and 3500 HD. Measure along the bed rail from the bulkhead to the closed tailgate, check the fit notes above, and if you are unsure, send us your VIN and we will confirm.
My truck is right at a model-year change. Which one do I need?
This part covers the 2014-2018 Chevy Silverado / GMC Sierra 1500 and 2015-2019 Chevy Silverado / GMC Sierra 2500 HD and 3500 HD. 2008-2013 Chevy Silverado 1500 trucks with the same bed use Revolver X2 39102. 2019 Chevy Silverado 1500 trucks with the same bed use Revolver X2 39132. Go by your truck's model year and body style, or send us your VIN.
What is the difference between the Revolver X2 and the X4s?
Both use BAK's patented aluminum slats, locking rails and slam latches with a 400 lb rating. The X2 has DualShield 60-grade vinyl with a vinyl-grain finish and a 3-year warranty. The X4s steps up to TriShield 70-grade matte vinyl, an all-matte-black finish (slats, clamps and hardware) and a 5-year warranty.
Will it keep rain and snow out of the bed?
It is built to: one-piece vinyl with no visible seams, flush side seals and a bulkhead seal. BAK calls it the most leakproof of all folding, roll-up and retractable covers, but its own install sheet notes the cover is not airtight, so plan on weather-resistant rather than sealed. Clear snow and ice off before you open it.
How much weight can it hold?
BAK rates the closed cover at 400 lb, evenly distributed. BAK's sheet also says not to drive with objects on top of the cover or tie cargo to it.
Can I drive with it rolled open?
Yes. Roll it fully to the cab and secure it with both straps. BAK says never to drive with the cover partly open, and keeping it secured is a warranty condition.
Installation
- 9/16" wrench or socket
- Scissors or a utility knife
- Isopropyl alcohol
- Torque wrench
- Hair dryer or heat gun are recommended
Here's the short version. Follow BAK's install sheet (below) for your truck's exact clamp and bracket positions.
- Seal the bulkhead. Clean the top of the bulkhead with soap and water, then isopropyl alcohol, and let it dry. Stick the seal flush with the front edge, snug between the bed rails: the 3/4" seal on a truck without a drop-in bedliner, the 1/4" seal on one with a drop-in liner.
- Set the first rail. Place the passenger rail on the bed rail with its slotted bracket pushed all the way to the cab. With a drop-in liner, remove the foam pads at the front of the slotted brackets; some liners need their corners trimmed.
- Clamp both rails. Fit the first clamp 12" or less from the front, the second near the middle (two in the middle on 8' beds) and the rear clamp less than 12" from the tailgate. Press the rail down, keep it square and level, and tighten each to 10 ft-lb with a 9/16" socket. Over-tightening can warp the bed cap. Repeat on the driver side.
- Set the cover on the rails. Rest the rolled cover on the rails at the tailgate, roll it toward the cab and throw away the packaging. Fold the front panel back, drop the two mounting bolts on each side into the slotted brackets, then fit the rubber washer, large flat washer and lock knob underneath, loosely for now.
- Square it up. Roll the cover open and closed a few times so it runs freely. Line up the front vinyl edge with the front of the rails (not the rubber seal) and keep a gap of about 1/8" (3.2 mm) on each side. Both slam latches must meet the locking levers squarely at the tailgate.
- Lock it in. Roll the cover open without knocking it out of line and tighten the knobs by hand only. Close it and check the locking levers hold it down on both sides. Stick the four D-shaped bumpers to the slats so the rolled cover can't touch the cab, and mount the strap clamps as far forward as possible at 10 ft-lb.
Stuck on a step?
- Rolled cover
- Driver and passenger side cover rails
- Bulkhead seals, 3/4" and 1/4" thick
- 6 clamps (8 on 8' beds)
- 4 lock knobs, 4 large flat washers, 4 rubber washers, 4 mounting bolts
- 2 strap clamps
- 4 D-shaped bumpers
Specifications
| Brand | BAK |
|---|---|
| Part Number | BAK39122 |
| Cover Type | Hard roll-up |
| Top Surface | One-piece DualShield 60-grade vinyl, aluminum-reinforced |
| Structure | Patented interlocking aluminum slats |
| Finish | Vinyl grain |
| Material | Aluminum with vinyl |
| Load Capacity | 400 lb, evenly distributed |
| Locking | Patented rotational locking rails, automatic slam latches (BAK Level-3 security) |
| Bed Access | 100% when rolled to the cab, secured with 2 straps |
| Seals | Bulkhead seal and flush side seals |
| Mounting | Clamp-on, no drilling on most trucks |
| 5th-Wheel Hitch | Compatible with most (BAK) |
| Bed Length | 8' box (GM's name), measured 8'2" (97.8") |
More media
2 videosWarranty, shipping & returns
-
Warranty
BAK covers the Revolver X2 against defects in materials or workmanship for three (3) years from the original date of purchase.- A defective cover or hardware component is repaired or replaced, at BAK's option; BAK may substitute a newer model with similar form and function.
- It covers the original purchaser only and is not transferable. Warranty registration must be on file, or keep a detailed, dated receipt as proof of purchase; contact us for help with registration or a claim.
- To keep it valid: clean with mild automotive soap and water only; keep the cover secured at all points while driving; check all clamps and retention parts for tightness after a week of driving after installation (or reinstallation) and now and then after that; clear snow, ice and anything else off before opening; never tow the truck from the rear with the cover on (remove and store it first).
- Claims: get a Return Material Authorization (RMA) number from BAK before returning anything. BAK may ask for the part back postage prepaid, and shipping charges apply to a repair or replacement. A claim needs your order number, contact details, vehicle, part number, a description, the receipt and photos.
- Not covered: damage from an accident, neglect, unforeseeable use, improper installation or servicing, or any other cause that is not a defect in material or workmanship. BAK does not accept returns of non-defective products once installed.
-
Free shipping
Ships free to the lower 48 states, with no minimum order.- Order by 5 PM ET on a business day and it starts processing the same day.
- This cover is an oversized item, so it ships by freight or as an oversized parcel.
- Most orders arrive within 1-5 business days.
- We email your tracking number as soon as it ships.
-
Inspect on delivery
This cover ships in a long, heavy box. Check it as soon as it arrives.- Look for crushed ends, punctures or tears in the carton.
- If something looks wrong, take photos of the box and the parts (and if a driver asks you to sign, note the damage on the receipt).
- Open the box and check the parts against the parts list before you install.
- Email support@prestigetruck.com right away with your order number, a short note and photos. We send a replacement or a full refund at no cost to you.
-
30-day returns
Return it within 30 days of delivery, unused, in the original packaging, with proof of purchase.- Email support@prestigetruck.com with your order number. We reply within 1-2 business days with instructions.
- Damaged, defective or wrong item: we send a prepaid label or arrange a pickup.
- Changed your mind: you pay return shipping. No restocking fee.
- Refunds go back to your original payment method within 7 business days of approval. See our returns policy.