BAKFlip MX4 hard folding tonneau cover closed on an orange Toyota pickup
BAKFlip MX4 tonneau cover partly folded on a faded pickup with a Best Seller badge
Tonneau cover folded up to the cab with the bed loaded, captioned full bed access
View from the tailgate of the BAKFlip MX4 folded against the cab, captioned America's best-selling truck bed cover
Steel toolboxes stacked on the closed cover panels, captioned built stronger
Water splashing on the cover panel surface, captioned sealed edge-to-edge
Ghosted pickup showing the BAKFlip MX4 panels with a New and Improved badge
Close-up of the BAKFlip MX4 rail with the automatic latch outlined, captioned automatic security
Hand tightening a BAKFlip MX4 rail clamp with a ratchet, captioned easy one-person install
BAK badge on the BAKFlip MX4 rail end cap
Best-in-class warranty shield over the BAKFlip MX4 panel texture

BAKFlip MX4 Hard Folding Tonneau Cover for 2024-2026 Toyota Tacoma (5' Bed)

$1,249.99 $1,566.99 Save $317.00
FREE SHIPPINGNo sales tax Only 1 leftIn stock now  Estimated delivery
Verify fitment with your vehicle
GO
Clear
Flash Sale Ends in--:--:--

Free gifts included with your order

Details
Details
Details
  • American Express
  • Apple Pay
  • Diners Club
  • Discover
  • Google Pay
  • Mastercard
  • PayPal
  • Shop Pay
  • Visa
  • Guaranteed FitmentTeam-confirmed fit or money back
  • No Sales TaxZero sales tax on every order
  • 30-Day Money-Back GuaranteeReturn it within 30 days of delivery for a refund
Prestige Truck customer support

Questions or a custom quote?

Mon to Fri, 9am to 5pm EST

+1 (470) 823-2453 Email Us
Locks the moment it closes
Sealed edge to edge
Multi-layer aluminum panels
Folds to the cab, drive open Folds to the cab, drive open
One-person install
The original hard-fold cover

Features

  • Locks the moment it closes: BAK's patented auto-latch engages as each panel closes, so there is no separate locking step. BAK says the Gen 3 lock parts were re-engineered to resist forced entry better than the Gen 2. To open it, drop the tailgate and pull the release cable.
  • Sealed edge to edge: Revised EPDM rubber perimeter seals and tight-fit clamps close the gap between the cover and the bed rails, and on most trucks a dual-action tailgate seal, 13% longer than before, covers the tailgate. Drain tubes carry off water that reaches the rails. BAK's own sheet notes the cover is not airtight, so think weather-resistant, not sealed.
  • Multi-layer aluminum panels: Aluminum top panels sit over high-density polymer cores on aluminum side rails. BAK says the Gen 3 panels are 22% stronger than the original MX4, and the closed cover is rated at 400 lb, evenly distributed.
  • Folds to the cab, drive open: Fold the panels to the cab, strap the cover to the buckles at the bulkhead and drive with the bed open for tall loads. Flipped fully upright, prop rods hold it against the cab on rubber bumpers. BAK says it is the only hard fold that leaves your 3rd brake light visible in every position.
  • One-person install: Click-in clamps hold the rails to your bed rails, with no drilling on most trucks, and one person can do the job. BAK rates it at 30 minutes or less (Level 1) and says the new click-in design cuts install time by 12%.
  • The original hard-fold cover: BAK says the MX4 defined the hard-folding category and calls it America's best-selling truck bed cover. The Gen 3 version (model year 2025) sits flush with the bed rails and wears a textured matte black finish on every surface.

Description & Fitment

Here is the BAKFlip MX4 sized for the 2024-2026 Toyota Tacoma with the 5' bed, with the factory deck rail system. That box runs about 60" along the floor. Revised EPDM perimeter seals and tight-fit clamps help keep weather out, and drain tubes carry off water that reaches the rails. Re-engineered prop rod clips hold it upright against the cab, and rubber bumpers protect the cab paint. BAK's patented auto-latch locks each panel as it closes, so there is no separate locking step. For the install, adapter rails bolt to the factory utility rails with T-nuts and the cover rails clamp on top, with drain holes drilled in the wheel wells; BAK rates it at 30 minutes or less. The 6'2" bed takes BAKFlip MX4 448447. BAK's 5-year limited warranty covers it from the original purchase date.

Fitment & Compatibility

Toyota
Years Model Bed Notes
2024-2026 Tacoma 5' (60") w/ Deck Rail System

Check your bed: measure along the bed rail from the bulkhead to the inside of the closed tailgate. This part is for the 5' bed on the 2024-2026 Toyota Tacoma. BAK's own brands list this box at 60" long. Fit notes from BAK: with the factory deck rail system (2024-2026 Toyota Tacoma).

Not for: the 6'2" bed (BAKFlip MX4 448447).

About BAK Industries

BAK.

BAK makes hard tonneau covers. BAK bills itself as "America's #1 truck bed cover."

The range splits into BAKFlip hard folding covers (MX4, MX4 EZ-Lift, MX4 TS, G2, F1 and Fibermax) and Revolver hard roll-ups (X2, X4s and X4 TS). The MX4 is the aluminum-panel BAKFlip that BAK calls America's best-selling truck bed cover; the MX4 TS adds T-slot rails and the MX4 EZ-Lift adds a lift-assist system.

Authorized BAK dealer. Prestige Truck is an authorized BAK dealer, so what we sell is new and genuine BAK. BAK's warranty "is nontransferable and applies to the original purchaser of the BAK product only," and BAK requires warranty registration on file or proof of original purchase (a detailed, dated receipt) for warranty service. Your Prestige Truck order receipt is that proof.

Frequently Asked Questions

Will this fit my 2024-2026 Tacoma?

Yes, if it has the 5' bed, with the factory deck rail system. Measured along the floor, that box is about 60". Measure along the bed rail from the bulkhead to the closed tailgate, and note it is not for the 6'2" bed (BAKFlip MX4 448447). If you are unsure, send us your VIN and we will confirm.

How do I check my Tacoma bed length?

Measure along the top of the bed rail from the bulkhead to the inside of the closed tailgate. This version is for the 5' bed, which BAK's own brands list at 60". If your truck's box is a different length, it needs a different part; send us your VIN and we will check.

What changed with the Gen 3 MX4?

BAK lists stronger panels (high-density polymer cores, 22% stronger than the original MX4), re-engineered lock parts that resist forced entry better than the Gen 2, revised EPDM perimeter seals and tight-fit clamps, a dual-action tailgate seal 13% longer than before, re-engineered prop rod clips, and a click-in design that it says cuts install time by 12%.

Will it keep rain and snow out of the bed?

It is built to: edge-to-edge seals and tight-fit clamps close the gap to the bed rails, and drain tubes carry off water that reaches the rails. BAK's own install sheet says the cover is not airtight, so plan on weather-resistant rather than sealed. Clear snow and ice off before you open it; that is a warranty condition too.

How much weight can it hold?

BAK rates the closed cover at 400 lb, evenly distributed. BAK's sheet also says not to drive with objects on top of the cover or tie cargo to it.

Can I drive with it folded open?

Yes. Fold it toward the cab and attach the straps to the buckles at the bulkhead, pulled snug, and you can drive with the bed open. The cover must be secured at all points while the truck is moving; that is a condition of the warranty.

Installation

Install time 30 minutes or less (BAK's figure)
DifficultyLevel 1simple installation; one person
TypeBolts to the factory utility rails with T-nuts and adapter railsdrain tubes need a drilled hole
Tools
  • a 1/2" wrench or socket and a Phillips screwdriver
  • plus scissors or a utility knife, isopropyl alcohol, 5/8" drill bit and drill, T-30 Torx driver, 3/8"-drive short extension and ratchet

Here's the short version. Follow BAK's install sheet (below) for your truck's exact clamp positions and settings.

  1. Seal the bulkhead. Clean the top of the bulkhead with soap and water, then isopropyl alcohol, and let it dry. Stick the included bulkhead seal from one edge of the bulkhead to the other and trim the excess. With a drop-in bed liner, the seal isn't needed.
  2. Fit the adapter rails. Remove the utility-rail end caps, slide three T-nut kits into each utility rail and refit the caps. Bolt each adapter rail to the T-nuts with the kit's bolt, washer and lock washer, push it toward the cab and line the T-nuts up with its holes, then tighten while pressing the rail down.
  3. Clamp the side rails and route the drains. Set each side rail on its adapter rail, pushed to the cab, and clamp them together with the back of each clamp behind the adapter rail next to a tab (on the driver side the middle and cab clamps sit left of the tabs, on the passenger side right of them). Keep the rails level with the bed cap and tighten to 10 ft-lb with a 1/2" wrench or socket. Fit the drain tubes and run them through a 5/8" hole drilled in the top corner of each wheel well, checking underneath first.
  4. Prep the cover. Slide the two cover retainer clamps into the track under the cab end of the cover, one per side. Peel the liner off each gasket, stick it under a buckle end, and screw the two buckle ends into the pre-drilled holes on the front header panel with the screws and nutserts. Hand-tighten only; don't use a screw gun.
  5. Set the cover in place. Lay the folded cover on the side rails at the cab end, centered between them, and turn the retainer clamps clockwise until the lock washer is snug. With the cover still folded, clean the spots for the cab bumpers with soap and water, then isopropyl alcohol, let them dry and stick the bumpers along the top edge where the cover meets the cab.
  6. Unfold, adjust and check. Unfold the cover toward the tailgate and center every panel side to side and front to back; the rear edge and tailgate seal rest on top of the tailgate with a 1/2" overlap. With a power tailgate, make sure it still works with the cover closed. Release each latch to check it engages the rails (the sheet shows how to adjust a slam latch), then re-tighten the retainer clamps. BAK's warranty asks you to re-check every clamp after your first week of driving.

Stuck on a step? Ask our install experts

What's included
  • Hard fold cover
  • Driver side rail
  • Passenger side rail
  • Adaptor rail driver side
  • Adaptor rail passenger side
  • 2 cover retainer clamps
  • 6 clamps
  • 2 buckle ends
  • 2 gaskets
  • 4 screws
  • 4 nutserts
  • 6 T-nut kits (5/16" flat washer, 5/16" lock washer, hex head bolt)
  • 2 bulkhead gaskets
  • 3 D-shaped cab bumpers
  • 2 drain tubes
  • Bulkhead seal

Specifications

BrandBAK
Part Number448446
Cover TypeHard folding
GenerationGen 3 (model year 2025)
Top PanelsAluminum over a high-density polymer core
Side RailsAluminum
FinishTextured matte black
Load Capacity400 lb, evenly distributed
LockingPatented automatic latching
SealsEPDM perimeter seals; dual-action tailgate seal on most trucks
DrainageIntegrated drain system with drain tubes
Bed Access100% when folded against the cab
3rd Brake LightVisible in every position
MountingClamp-on, no drilling on most trucks
Warranty5-year limited
Fits2024-2026 Toyota Tacoma, with the factory deck rail system
Bed Length5' (60")
UPC192631047544

Warranty, shipping & returns

  • 5-year limited warranty

    BAK covers the BAKFlip MX4 against defects in materials or workmanship for five (5) years from the original date of purchase.
    • A defective cover or hardware component is repaired or replaced, at BAK's option; BAK may substitute a newer model with similar form and function.
    • It covers the original purchaser only and is not transferable. Warranty registration must be on file, or keep a detailed, dated receipt as proof of purchase; contact us for help with registration or a claim.
    • To keep it valid: clean with mild automotive soap and water only; keep the cover secured at all points while driving; check all clamps and retention parts for tightness after a week of driving after installation (or reinstallation) and now and then after that; clear snow, ice and anything else off before opening; never tow the truck from the rear with the cover on (remove and store it first).
    • Claims: get a Return Material Authorization (RMA) number from BAK before returning anything. BAK may ask for the part back postage prepaid, and shipping charges apply to a repair or replacement. A claim needs your order number, contact details, vehicle, part number, a description, the receipt and photos.
    • Not covered: damage from an accident, neglect, unforeseeable use, improper installation or servicing, or any other cause that is not a defect in material or workmanship. BAK does not accept returns of non-defective products once installed.

  • Free shipping

    Ships free to the lower 48 states, with no minimum order.
    • Order by 5 PM ET on a business day and it starts processing the same day.
    • This cover is an oversized item, so it ships by freight or as an oversized parcel.
    • Most orders arrive within 1-5 business days.
    • We email your tracking number as soon as it ships.

  • Inspect on delivery

    This cover ships in a long, heavy box. Check it as soon as it arrives.
    • Look for crushed ends, punctures or tears in the carton.
    • If something looks wrong, take photos of the box and the parts (and if a driver asks you to sign, note the damage on the receipt).
    • Open the box and check the parts against the parts list before you install.
    • Email support@prestigetruck.com right away with your order number, a short note and photos. We send a replacement or a full refund at no cost to you.

  • 30-day returns

    Return it within 30 days of delivery, unused, in the original packaging, with proof of purchase.
    • Email support@prestigetruck.com with your order number. We reply within 1-2 business days with instructions.
    • Damaged, defective or wrong item: we send a prepaid label or arrange a pickup.
    • Changed your mind: you pay return shipping. No restocking fee.
    • Refunds go back to your original payment method within 7 business days of approval. See our returns policy.

What our customers say

4.6 · 5025 reviews

Photos from owners

+163
Steven P. Verified
06/11/2025

Great cover with a few flaws

I just installed my cover and it looks great. It was a very easy installation. The only part about the cover I dislike is once I put the cover on and looked around the whole thing the spots where it folds were a little torn up. Being brand new that shouldn’t be like that.

Crispin F. Verified
09/24/2026

Very well made, easy to

Very well made, easy to install, functionality great

Frank M. Verified
09/06/2026

Looks good!

I like the way this cover looks and it protects whatever I place in the rear.

Robert M. Verified
08/26/2026

malouinrl BAKFlip MX4

This is my 2nd MX4 tonneau cover; had one on my last truck. Easy to install and looks fabulous on the truck. Very durable and convenient, particularly the ability to easily fold and lock to open up the bed for large loads.

MarksTojo
12/02/2025

Awesome Hard Tonneau Cover

Had previously owned 2008 Tacoma 4x4 had it for over 10 years. Purchased Bak Flip Hard Tonneau Cover for that Tacoma & was pleased with its performance. So it was a no brainer for return & purchase a new Bak industry’s MX4 the most current version of the original Bak Flip Hard Tonneau cover when the time came. Pleased with this newest version of the Bak Flip cover. It’s pricey, but it’s well worth the extra $ for this hard tonneau cover. Folds & flips up to expose nearly the entire 5 ft short bed. Wouldn’t buy another manufacturer when it comes to hard tonneau covers for the 3rd generation Tacoma.

Brian H. Verified
08/23/2026

Truck

It looks good on the truck. Its not completely 100% keep the water out of the truck bed

Sonya C. Verified
07/22/2026

Loving My Hard Folding Cover

I ordered this for my guy Birthday 🎉 he loves it this was a little expensive not going to lie to you, We took the truck get to get the part installed

Scott P. Verified
06/14/2026

Backflip MX4

This is my third Bakflip and the design and quality of this one supersedes the two previous models. Installation was much easier the fit is perfect and it’s sealed much better, so little to no water leaks. And it looks great on my truck!

Brian B. Verified
08/11/2026

Latch broke in less than a month

Latch broke in less than a month How do I get support? I have pictures of the latch which pulled out of the cover

Jeff M. Verified
05/29/2026

Very nice hard cover

Really like the cover. Made of quality materials. Easy to follow instructions. Easy assembly.

Whit
06/09/2025

No Problems......Great Product

Easy Install and great product! Looks great and no problems. So happy with my purchase.

Michelle B. Verified
04/26/2026

Great product!

Works just as it should! Very easy to install and use. Fast and easy to open the bed and deploy it back and closed! Definitely recommend to anyone trying to store their stuff and keep the bed nice and dry!

Victor Verified
04/17/2026

Tonneau cover

Easy to install and makes the truck look very nice

Randy B. Verified
11/13/2025

Perfect

Easy install, water tight, and looks great

Scotty H. Verified
11/13/2025

Awesome

Looks an works good. Easy to install

Paul F.
09/15/2024

Flush mounted deliciousness

This is easy to install, awesome to look at, and super functional. It's totally knarly bro!

Bonnie F. Verified
08/10/2025

2018 Extended cab Tacoma

2018 Extended cab Tacoma

Yarin R. Verified
09/05/2026

Cover , no strong.

Fit perfect, the issue I have is when you are folding and keep open the cover, the air kick back the cover, it is not strong enough to hold, should be better quality for the price I pay, looks good but I was disappointed that did not function as needs to be.

Ardell Verified
06/27/2025

Flip bak

Flip bak

Donna P. Verified
06/22/2025

Overall pleased ( rating 4. 5)

My husband is pleased with the truck bed cover. My only complaints is that communication was lacking. We were up against a time crunch and after a week we had not received a shipping notice and i reached out for an update and received a reply that our order was processing. We never received a shipping notice and the cover showed up last week.

Mike H. Verified
06/04/2025

Still waiting!

I ordered on May 19th, now June 4th. Haven’t heard anything about delivery or shipping.

Sheldon
08/04/2026

Even better than my last BakFlip

This is my 2nd cover. Had one on my last truck and when I got my new 2500 I went with a cheaper cover which lasted about 2 years. Bought the new model (aluminum MP4) of BakFlip and absolutely love it. Spend the money and get a product that lasts. Otherwise you’ll be buying a BakFlip in a couple of years anyway.

John L. Verified
04/18/2025

Great product

Tonneau cover looks great, was easy to install and seals the truck bed very well!

Janice T. Verified
12/31/2024

Happy Truck

We are pleased with is this truck bed cover. It will make our trips safes and the ability to pick up items secure.

Sharon T. Verified
12/02/2024

Cover

All went good

Mike l. Verified
10/17/2024

Backflip MX4 hard folding Tonneau

Looks great - very solid- I’ll never go back to a soft cover

Lincoln
07/15/2026

Worth The Investment

I purchased the Backflip MX4 Tonneau cover recently for my Tacoma and love it. It is very well made and easy to install. A really nice product.

patrick m. Verified
09/14/2024

Nice unit

Great fit and look. Perfect product

Scott M. Verified
05/20/2024

Head Turner

When I use my Backflip I'm constantly asked what is that and where did you get it?.

Cameron J. Verified
07/16/2026

Leaks too much for price

The cover looks beautiful. Install was easy. But near the front of the bed on the right side water has a consistent drip during a med-high rain. If I was to know this leaked this much I would have bought a cheaper alternative. This review does not allow for media but I would post if I could.

David V. Verified
04/18/2024

BAKFlip MX4

Easy to install, Simple operation and seal and looks great! I love the look and knowing my stuff is secure.

Charles R. Verified
03/17/2024

Backflip MX4 Cover

Came well packaged and exactly as described. Great fit and look custom fit. Glad I made the purchase

Greg
06/28/2026

Great product, great fit but

Great product, great fit but the installation was a little tricky but overall was workable. Would highly recommend it to others and have several times.

Timothy M. Verified
02/09/2024

Perfect fit and good look

Easy to install and the fit is excellent. Looks great on the truck and gives me the oeac3 of mind I need when hauling equipment in the bed. If possible would like to see some kind of extra locking mechanism. Maybe something on the inside of the tailgate against the wall?

Brian R. Verified
08/08/2026

Bakflip mx4

Came in quickly and put together well. I like the look and hardtop surface. Have yet to run truck through a carwash, but don't expect any problems. Happy so far,thanks.

Richard Verified
05/15/2026

Bakflip mx 40

Looks great does as advertised only issue leaks in front corners I will add some weather stripping and give another review

William H. Verified
01/12/2026

Not water tight

It appears to be leaking water into the bed.

Jeff N.
06/16/2026

High quality

Love this cover Strong and looks great. Easy to install too. Fits my rambox perfectly.

John M. Verified
02/20/2025

Drilling the CarbonPro liner for

Drilling the CarbonPro liner for the rails was a little more difficult than it looks in the directions. You had to angle the clip on occasion to line up but once you do a couple you figure it out. One side of the clips hang up on the rails so they do not hold cover down. I had to crawl into the bed to get the clips to grab. It was cold when I installed. I hope once it warms up, this issue will go away.

garland p. Verified
09/06/2024

Back flip

Instructions could have been clearer. The front right corner of the cover leaks a bit. Is there a solution to stop the leaks Otherwise it’s great.

Ardean G. Verified
04/28/2024

I like it

The youtube videos would have you believe the cover is an installation of less than a half hour. Maybe true once you’ve had experience. Don’t be fooled first timers unless you’re really lucky. One corner had popped off apparently from shipping or when unpacking the cover. Anyway, that was already fifteen minutes to make sure I got it back on correctly. The most serious mistake I made was not getting the clamp to the rail high enough. I actually made that mistake on all six clamps. Look underneath when securing the clamp from inside the pickup box, that the clamp is ALL THE WAY up. I still don’t get the weather strip in front. I put it on but the cover doesn’t fit over it neatly unless you don’t mind sloppy. I took the weather strip off. I’m not looking for being completely waterproof, which you likely wont get anyway. Another issue was the lock down tabs. I had one that didn’t want to…

Dennis R. Verified
08/23/2026

I wish I bought the MX2 instead.

I had an MX 2 installed on my 2017 Tacoma in January 2017. When I recently bought a 2023 Tacoma I wanted the BakFlip for it. The MX 2 is so much easier to install and it aligns with no issues. I had to keep adjusting the rails to improve the fit. The right side of the cover did not close all the way; there was a 1/4 inch gap. Part of the problem was the rubber seal improperly installed at the factory. I managed to peel it back and adjust it as it should have been.

Jeremy W. Verified
09/09/2026

Great, but a dent on shipping

Everything was great, but the box was beat up a little. Upon opening the box, there was a small dent on the inner portion of the cover. Not big enough to return, just big enough to notice.

Luis
05/19/2026

Best cover ever

I have many other covers before this one. And I will say this is the best I have ever owned. Easy to install and operate.

CONNER Verified
08/07/2026

BakFlip MX4

I’ve been wanting the BakFlip MX4 for my 17 F150 for a while and I finally broke down and bought one. It’s everything I thought it’d be. It’s has great quality, durable and can easily be installed within a couple hours by yourself, but an extra set of hands doesn’t hurt.

Jeffrey P. Verified
06/20/2026

Better then expected.

Searched for about 6 months to find the tonneau cover. I really wanted the security of a hard top without sticking above the bed rails it checked those boxes. I also did not want to drill my truck bed. The install was super simple my wife and I had it on the truck in about a half an hour.

Richard A. Verified
06/04/2026

2026 Maverick cover

This is my third truck to install bak flip tri fold hard cover. Each one was improved and better than the last. My only issue was a wrong part was packed with mine so I had to call customer service to ship out the correct part. I think I have had this issue on the last two covers. Issue was always resolved in a professional and professional way but it is just an added cost to you and an extra step for the customer. You dont expect this from this price point.

Jill H. Verified
10/08/2026

Perfect

Excellent product. Easy install. My boyfriend loves it.

Anonymous
05/10/2026

Awesome

This is the second tonneau cover I’ve owned and it’s become a must have on a truck. Good quality construction and easy to install. I would recommend this over any other kind of bed cover.

Paul H. Verified
05/18/2026

Sturdy, Looks great

Replaced a soft cover with this. So far its been great. Gear is secure. Easy install.

Bob K. Verified
05/16/2026

What a waste of time

First box came without hardware. Second box came with everything but was not straight with one side being longer than the other. They kept asking me for pictures and measurements till I had enough and sent it back for a full refund. Will never buy anything from them again. The funny thing is ,this is the second time they asked me to do a review on their junk.

Gregory D. Verified
10/08/2026

Great look

It installed easily, look great, and functions good.

William L. Verified
05/14/2026

Better Than OEM with easy install

The Ford Maverick factory options are fine but the BAKFlip is heavier duty. The installation was easy and took an hour but I have installed one on my F350 previously. It may take a little longer for someone with no experience installing a bed cover. Instruction are easy to follow. The BAKFlip is popular so there are excellent videos of step by step instruction online. An advantage of the BAKFlip is it is more secure than a regular cover. It’s going to be hard for someone to break into my bed and steal anything.

Albert P. Verified
05/16/2026

Expected a bit more for the price

First, watched the online video instructions for my year mode and make prior to starting. Small item, but 1/8" shims shown in the video were not included with my purchase. Second, both rubber bumpers that support the cover when in the folded position became unattached after 6 weeks without ever having the cover in the folded position. Third, both struts that are used to lock the cover in the folded open position are constantly vibrated from their holders and then hang down getting entangled in what ever cargo is being carried. Just a matter of time before they are broken off.

Anonymous
04/14/2026

MX4 on 2021 2500hd

Have had a couple of theses covers and they are amazing. Yes a little bit of water gets in regardless of what anyone says, but they are the best there is in flip back covers hands down!!!! I’ve had them all. Buy a back flip 1st or last it doesn’t matter.

Michael F. Verified
05/09/2026

2026 F350 6. 5

Love the new design. Light weight and excellent quality and design. Easy to install with minimal tool required and the looks are amazing. Super sleek.

Sidney C. Verified
10/08/2026

BAKFlip Excellence

I have purchased the BAKFlip MX-4 for 2 prior pickups and have been very pleased with the appearance, fit, materials, and workmanship. Thank you.

Duane Verified
05/07/2026

Tonneau cover looks great and

Tonneau cover looks great and was very easy to install. It’s very easy to fold open and gives full access to the whole bed.

Michael R. Verified
05/06/2026

Awesome Cover

This BAKFlip is the best cover Ive had on any of my trucks by far. Easily installed and gives the truck a nice clean look. Dont hesitate buy one today!

Anonymous
03/23/2026

Excellent

Over all easy assembly, excellent fit, great product

James R. Verified
10/08/2026

Topper

Got the cover quickly. Install was pretty easy but I did read and watch videos before install. My 11 year old grandson, he did most of the work inside the truck bed, and my son assisted. So you know it was a straight forward install. Love the topper.

Kenneth Verified
04/28/2026

BAKFlip MX4 Tonneau Cover

I’m very pleased with the fit, finish and ease of installation. A couple of pieces were damaged in shipping and customer service replaced them quickly. The only improvement that I can suggest is a heavier duty box to ship it in.

Joel J. Verified
04/26/2026

BAKFlip Max4

Very easy install. Fits great and looks good also.

charles f. Verified
04/24/2026

It leaks

Was initially impressed with the bed cover. Appearance is great, installation was easy. But after a rain, water pools in the middle of the cover and begins to leak in the middle of the bed. Ive had numerous bed covers (roll up/soft trifold/hard trifold) and they all leak and I understand that it is unavoidable. However, other bed covers have leaked towards the cab or at the tailgate. This one leaks right in the middle of the bed. For the price I cannot and would not recommend this cover to friends/family.

Anonymous
03/06/2026

BakFlip covee

Very functional cover. Installation instructions/process very poor for the carbon bed GMC model.

Kristen W. Verified
08/21/2026

Poor quality

The first backflip we received had a divet in the panel. They sent us a new panel that had the corner cover damaged and the screw pulled out. It was for a Long bed truck and it didn’t come with full length solid rails we had to add the extra 2’ which wasn’t easy and was annoying. Since we have been using it for over a month, 4-5 of the protective foam pieces have come loose and fallen off and we have tried to put some back on but they keep falling off. Overall this seems like a very low quality truck bed cover with components that can’t hold up to hardly any use or the outdoor elements. Very disappointed in this product.

Douglas B. Verified
04/20/2026

Best Value Tonneau Cover

Easy installation and very versatile tri-folding Tonneau Cover. Removes easily. Aesthetically appealing. Highly recommend.

Larry C. Verified
04/17/2026

Great Fit and Look

Excellent customer service and easy on line ordering. Packaged well and received with no damage. Easy install. Very pleased with look.

Reginald S. Verified
04/14/2026

The Best Truck Bed Cover Yet!

In 2015, I bought my first BakFlip and transferred it to my second Ram 1500. Here in 2026, I bought my third Ram and decided to get the new BakFlip design and am glad I did. Very easy to install and it took me less than 30 minutes. I love the finished look - like it's from the Ram factory. I like that the folded panels are really secured in place when driving and won't get whipped in the wind plus it leaves room for maximum cargo space. The upgraded cable system for latching and unlatching is another big plus. They really designed a great product and I recommend it over all the others out there. . . well worth the money!

Steve K. Verified
10/08/2026

Great tonneau cover

Great tonneau cover for the money.

Anonymous
02/17/2026

Fits Perfect

This cover is the best by far

Dennis M. Verified
03/30/2026

BAKFlip tonneau

Love it, easy install, great cover!

Lee A. Verified
03/05/2026

Solid

Everything I expected it to be. Same as GMs only less $. I rated medium on value because Im cheap :-). Seriously though, it was easy to install. I did it solo in about 45 min. Followed YouTube instructions from a guy that took the time to video his install. Got to love YouTube. Looks sharp. Has performed as expected. Zero issues. If you have a Sierra EV, get this cover.

Richard M. Verified
10/08/2026

bed cover

the cover added nice look to my chevy truck

Ricky B. Verified
02/19/2026

The BAKFLIP MX4 hard folding GEN3 is great

I just love how it sits on my truck it makes it look very distinguished

Anonymous
02/12/2026

As advertised

Local shop was gonna charge 400$ for install so i bought online myself and installed in 60 min or once unboxed. Very easy install with only a couple tools needed. Looks great and very, very little to no water gets in. I would buy again for my next truck.

Michael F. Verified
01/18/2026

Very good

Nice product super easy to install but grab a friend its much easier. Product fits the bed nicely. And the lathes made it easy to fold up. If I had one critique I wish the cover on the Cab side was convex to match the shape of the bed on my 25 raptor. Small critique would make it perfect other than that it still gets an A+ from me.

Kevin W. Verified
05/02/2026

MX4 Gen 3

I like the cover especially because it's a hard top. There still is leakage and some parts, like the seal, seem to be fragile. Mines popped off. I have to move it a little to make it lock. If I have to use my whole truck bed, it covers my whole back window. I do like the steak flush look. I like that it easily opens with the pull down. I also like the fact you can close it with the truck bed door open or closed. Overall I like it, but for the price, definitely wish there were some things that were better.

Alan L. Verified
10/07/2026

New install

Only took me an hour to install. Great looking.

Mohamed Z. Verified
01/02/2026

Great fit

Ive been wanting a hardtop cover for months but I waiting to sell my camper shell, finally I was able to find the correct match since my truck is eight feet bed. It wasnt an easy task to find the correct one! This one looks great on my truck

Jeremy Verified
08/11/2026

Poor Q/A inspection

While the cover looks good the quality of parts were defective. I had to call for replacement and repair parts twice. The cable to release the lip broke due to poor workmanship. I had to replace the latch myself after only 2 weeks. This is way overpriced for having to fix it myself.

Jtmalone86
08/18/2026

Great utility, quality not as much

My wife had one of these on her 2010 nissan titan and it was perfect in every way. So when we bought a newer truck (2015 ram 2500) we wanted to get the same cover. Tonneau was shipped quickly, was packed well and had easy instructions. The fitment is perfect and the overall utility is great. I espec6like how it acts as a headache rack when fully up and out of the way. I've had this item for a year now and have had it opened and closed around 30-40 times. The wire for the section closest to the tailgate broke. Inside the latches the wire is looped and crimped on and it slid out of the crimps. So I had to buy new cable and fix it. Works like a charm now. I will say the other stock cables work well and have not broken. Other issue is the clips that hold the seal into the side of the tonneau keep popping out. They pop back in easily but it's definitely annoying and causes the seal to…

duke
09/12/2026

quiestionable longevity

I have this cover on a 2021 F250. I work in the construction industry and need to open it often. The corner pieces have fallen off and the coating doesn't hold up to medium use. The seal leak in various places. If this is something you rely on, I would consider other brands.

Logan S. Verified
11/14/2025

Looks Great but Leaks

I love the low profile look of the cover but it leaks in the corners by the cab. I even purchased some silicone putty to fill in the gaps between the bed and the cover, but it still leaks.

Alex S. Verified
08/06/2026

I am happy with the

I am happy with the product. It works well. My goal was to purchase a more heavy-duty cover, but currently it is not made for the 2026 GMC Sierra AT4 EV. If that ever changes please contact me as I most likely will be interested.

Gary C. Verified
11/13/2025

Needs Additional Latch set

Second fold from rear window needs a latch set. The joint raises and lowers after your speed reaches 70 mph and above. This can lead to water leaks at the joint. Contacted company, but would not fix problem or refund money. They said this is normal function of the cover. This problem is caused by the design of the aerodynamics of the truck with the Cab Air Deflectors. This is different from all other Chevy Trucks.

Daron N. Verified
07/23/2026

Disappointing Quality for the Price

For the price I paid, I wouldnt buy this cover again. The biggest issue is with the long-bed rails. They come in two pieces, but only include three mounting clips. Because of this, its very difficult to get the rails properly aligned during installation, and they never seem to line up quite right. The adhesive rubber bumpers have already started coming loose after being exposed to warm weather. Lastly, the cover gets extremely hot in direct sunlight. It becomes uncomfortable to touch and makes it painful to open when needed. Overall, Im disappointed. For what this cover costs, I expected better quality and a better-designed product. Now that its installed, I feel stuck with something Im not satisfied with.

Marc C. Verified
06/07/2026

Tonneau cover is nice - but damaged inside of packing

The cover went on well but once I installed it, I noticed the clip that holds the strap for locking into place in the folded position, was broken off. I found the broken piece in the packing material. The only real fix would be to send the whole cover back and I needed it for my truck. I guess I should have looked it over more closely when I removed it from the packing.

Noel M. Verified
05/07/2026

It's good, but not 100%.

It's good, but not 100%. The corners on the front have an opening where water can get in, and it's a bit hard to open.

Kristyn Verified
03/18/2026

Easy install, nice looking

This tonneau cover was even nicer looking than I thought it would be. Super streamlined and matches my Rhino Lining bedliner somehow. The only complaint is that I installed it three weeks ago and the adhesive foam strips are peeling up already. The truck is garage stored and it’s summer so it hasn’t been in the elements yet.

Dave B. Verified
10/09/2025

Ok

With the longer bed this cover doesn’t allow you to transport with just one fold. Any suggestions. Also, any suggestions on making it less water resistant?

Nate Verified
07/23/2026

Leaky

This is the least weather proof cover Ive ever owned, on top of that it rattles on any pot hole or bump. The only thing this cover has going for it is the appearance.

Joseph G. Verified
07/07/2025

Clamps weren't right

The clamps don't seat well against the metal behind the cap rail plastic. So, they can't hold straight when closing the cover. I contacted support and they said to send a picture and over a week later I've gotten nothing back after additional email. Pretty disappointed that something so simple couldn't be resolved quickly. I have put backing material in place until they figure it out so I can at least use it. The tailgate seal was also not seated correctly so I had to take it off and reseat it. For such an expensive product they really aren't doing the small parts well.

Danny S. Verified
09/20/2026

Too short

Love everything about the cover except that it’s too short. It barely covers the edge of the bed at the front and just touches the tailgate. Seems about two to three inches shorter than it should be so it doesn’t keep the water out at the tailgate and it’s not very secure for theft.

Andy Verified
09/09/2026

Used bed cover

The foam was glued together and bed cover looks worn and half of the parts are missing . Took it to a place for an install and they told me this is definitely a used item. Wasted a whole day!

Jerry D. Verified
07/25/2026

Not engineered well for ridgeline

very difficult to get to fit. RETURNED. Thank you for no hassle.

Danny B. Verified
07/21/2026

1 star

Product is flimsy. You can see light escaping through the cracks from the outside. Plenty of water gets inside. Side trims are always falling off rail. Always looks dirty or faded. Side stands don’t hold up box correctly.

Dale T. Verified
06/23/2026

Hard folding

I am very unhappy with the fit. It does not allow the tail gate of my 2026 Nissan frontier to properly close. I have to position it further forward on the bed to make it work. I would not recommend this cover or the company.

Jeff S. Verified
06/16/2026

Be aware of damage and no customer support

Damaged bed cover and no help from customer servic

James I. Verified
05/16/2026

Will not fit 2025 Nissan Frontier Pro X

I like the appearance and a parent quality of the product, but it would not work on a 25 Nissan frontier the rear latches would not come down enough to latch so I had to return it. customer Service was very helpful and I had no issues so far still waiting on my refund.

Marie C. Verified
05/12/2026

Nope

It looks unfinished. The rubber molding on the sides creased up were it folds. I gave it some time n the heat to see if it would flatten and it didn’t. The corners by the cab looked unfinished. The installation of the rails was horrible, yes I did it right, and it still didn’t close and lock wo slamming it or lifting on the side rails get it to lock. For the amount of money it cost I expect much better. So I returned mine and went with another brand from another company. And am very happy now. No rubber flap edges. Easy install and locks every time. Yes: the return process was fast and easy, but I’m rating the product.

Dan C. Verified
05/11/2026

Bakflip MX4 Ram truck w/rambox

I’m very disappointed with this product. It leaks at both the front and rear, which defeats the whole purpose of having a bed cover/top in the first place. The instructions were also a major issue. I have a Ram with the RamBox bed, but the instructions provided were for a Chevy 1500. The installation is not the same, and it made the process much more frustrating than it needed to be. Had I known the product would not seal properly and that the correct truck-specific instructions would not be included, I would have chosen a different top. At this point, I honestly wish I could return it.

Ernest S. Verified
05/07/2026

Substandard Cover

After making several adjustments to maintain the cover from dismantling, I reached out to customer service but have yet to receive a call.

Jeffrey S. Verified
07/21/2026

Leaks everywhere

If you want a cover that does not leak look somewhere else. It has been installed correctly and it's still does not prevent water from entering the bed. . after a good rain the bed as water in it do not keep anything that is valuable in your bed.

Chad M.
08/29/2026

Backflip MX4 Bed cover honest feedback

First of all, I don’t like to bring bad news, that being said, here it goes. Last year 2022 in may, I received my first MX4, it looked great! I had little trouble with installing it, about 30 mins I’d say. My issue is with the overall durability or thickness the bad cover aluminum, it dents so easily. One hailstorm and it looked like a golf ball. Ugh, that was just having it for a few months. The company was receptive to my concern, and sent me a “fiberglass” one to hopefully correct the issue. The next light hailstorm and it was another golf ball. I’m not sure if they sent me another aluminum one by mistake, or their fiberglass dents vs. cracks? It’s just a lot of money to ruin the look of your otherwise tough looking truck. Sorry Bakflip, you even tried to make it right by sending me another one, and still failed. Makes me feel a little sick.

RichieT
07/07/2026

Good but not perfect

Looks good, I like that it folds all the way for full bed access. One of the bumpers for when it is fully open blew off. Still leaks water inside. Could probably use to be made a little longer for more coverage over the tail gate. I was expecting better for the money I paid for this thing. I have a cheaper one on a different truck that leaks about the same. I going to try some extra gasket in places and hope for the best.

Questions about fit or install?Chat with our team, Mon to Fri, 9am to 5pm EST.Ask a question