ICON Vehicle Dynamics 2.5 Series Coilover Kit for 2019-2023 Ford Ranger (0-3.5" Lift)
Free gifts included with your order
- Guaranteed FitmentTeam-confirmed fit or money back
- No Sales TaxZero sales tax on every order
- 30-Day Money-Back GuaranteeReturn it within 30 days of delivery for a refund
Questions or a custom quote?
Mon to Fri, 9am to 5pm EST
Complete your upgrade
Fits the same truck
See it on a truck
Height You Can Adjust
ICON Engineered Springs
Reservoirs and Adjusters
Features
- Height You Can Adjust: A threaded spring perch sets ride height within the range ICON lists for the vehicle, so you can level the stance or make room for bigger tires. ICON presets each coilover at its recommended height.
- A Larger 2.5" Shock Body: The 2.5" body and its larger piston area than the stock parts improve damping and ride quality on pavement, washboard and rock alike.
- Valved for the Vehicle: ICON sets the length and valving of each coilover for its application, giving a sporty feel on the road and the control to handle rough ground off it.
- ICON Engineered Springs: Each assembly carries an ICON coil spring chosen for that vehicle's weight and lift range, matched to the valving of the shock it rides on.
- Reservoirs and Adjusters: Remote reservoir versions keep the shock cooler on long off-road runs, and CDCV, CDXS or CDEV valves add compression adjustment where ICON offers them.
- Built to Be Rebuilt: ICON coilovers are fully rebuildable and re-tunable, so the same assemblies can be serviced or revalved over a long working life.
Description & Fitment
The ICON VS 2.5 Series coilover kit is a front kit for the 2019-2023 Ford Ranger with a 0-3.5" lift. Ride height is set on a threaded perch, and the larger 2.5" body adds oil capacity and piston area over stock. Versions run from standard to extended travel and remote reservoir, with CDCV offering 10 compression settings. The coilovers are valved for the vehicle and built to be rebuilt, and an alignment is needed after install.
Fitment & Compatibility
| Years | Model | Bed | Notes |
|---|---|---|---|
| 2019-2023 | Ranger | — |
Check your fit: match your year, model and the notes in each row: 2019-2023 Ford Ranger.
Not for: years, models or trims outside those rows. Other coilover kits in this line for the same model: 91110/91210/91210C (2.5 Series Coilover Kit, 1-3" lift, 2019-2022).
About ICON Vehicle Dynamics
ICON Vehicle Dynamics designs and builds performance suspension for trucks and SUVs at its shop in Riverside, California. Engineering is led by Dylan Evans, its head engineer and a SCORE champion driver, and ICON tests its parts on the street, on the trail and under race conditions.
ICON's engineers begin with the result they want from a vehicle, then study the forces acting on it in motion, which is where the name Vehicle Dynamics comes from. Fabrication stays in ICON's own shop, from laser cutting and metal forming to CNC machining, welding and final assembly. ICON calls its suspension systems and shock absorbers the top choice for popular trucks and SUVs.
Authorized ICON Vehicle Dynamics dealer. Prestige Truck is an authorized ICON Vehicle Dynamics dealer, so every ICON part we sell is new and genuine. ICON's warranty is for the original retail buyer, on the vehicle the part was first installed on. Keep your Prestige Truck order receipt: we use it when we take a claim to ICON for you.
Frequently Asked Questions
Will this fit my 2019-2023 Ford Ranger?
It fits when your vehicle matches one of these rows: 2019-2023 Ford Ranger. If you are unsure about your trim or drivetrain, send us your VIN and we will check it against ICON's application list before you order.
Is an alignment part of the install?
Yes. ICON's install sheet for 91250 calls for the vehicle to be aligned once the coilover kit is in. The sheet is linked in the Installation section below.
How much lift do these coilovers give?
It depends on the vehicle. Each part shows its adjustable range in the Lift option, and ICON rates those heights for a stock-equipped vehicle, so a heavy bumper or winch can lower where it settles.
Do I need an alignment afterward?
Yes, after front coilovers. A front ride height change moves the suspension geometry, and ICON calls for a professional alignment. Retorque all hardware after the first 100 miles as well.
Do I need new upper control arms?
On some vehicles, above a certain lift height or with extended-travel versions. ICON lists the requirement in the notes for each vehicle, so check them before you set the ride height near the top of the range.
How often do ICON shocks need service?
ICON's maintenance guide suggests a factory service about every 40,000 miles for street use, or about every 15,000 miles for a mix of street and dirt, and sooner if a shock leaks, rides worse or gets noisy. Wash off salt and mud, wax the bodies once a year and check the nitrogen charge yearly.
Installation
- Floor Jack
- Jack Stands
- Drill
- 11/32" Drill Bit
- Air Hammer
- Sawzall / Angle Grinder
- Torque Wrench
- 15mm Socket / Wrench
- Rest on ICON's sheet
Here's the short version. Follow ICON's install sheet (below) for your vehicle's exact steps and torque values. These steps are for part 91355; the other parts on this page install from their own ICON sheet below.
- Using a properly rated jack, raise the front of the vehicle and support the frame rails with jack stands. Ensure the jack stands are secure and set properly before lowering the jack. NEVER WORK UNDER AN UNSUPPORTED VEHICLE.
- Remove the nut from the rear stud first, leaving the front one tight, as this is the harder one to get to. Doing this will help to hold the bar pin securely while you hammer the rear one out.
- Install the ICON coilover. This may require you to pry downward on the lower arm to get the rod end into the lower control arm pocket.
- Position the reservoir on the reservoir bracket against the frame to find the mounting hole location. Mark the hole position for drilling.
- Mount the reservoir bracket using the self-tapping screw and a 9/16".
- Have the vehicle professionally aligned.
- ICON 91250 - 19-UP FORD RANGER 2.5 VS IR COILOVER KIT (9-28-2021 REV.B) (PDF)
- ICON 91255 - 19-UP FORD RANGER EXTENDED TRAVEL 2.5 VS IR COILOVER KIT (9-28-2021 REV.B) (PDF)
- ICON 91355 - 19-UP FORD RANGER EXTENDED TRAVEL 2.5 VS RR COILOVER KIT (9-28-2021 REV.B) (PDF)
- ICON 91355C - 19-UP FORD RANGER EXTENDED TRAVEL 2.5 VS RR CDCV COILOVER KIT (9-28-2021 REV.C) (PDF)
Stuck on a step?
Specifications
| Brand | ICON Vehicle Dynamics |
|---|---|
| Product Type | Coilover assembly |
| Series | 2.5 Series |
| Body Diameter | 2.5" |
| Ride Height | Adjustable within ICON's listed range |
| Adjustment | Fixed valving, or CDCV, CDXS or CDEV where offered |
| Service | Fully rebuildable and re-tunable |
| Lift | 0-3.5" |
| Part number | 91250 |
| UPC | 840103406862 |
| Part # | Configuration | UPC |
|---|---|---|
| 91250 | standard | 840103406862 |
| 91255 | extended travel | 840103406879 |
| 91355 | extended travel, remote reservoir | 840103408569 |
| 91355C | extended travel, remote reservoir, CDCV | 840103408576 |
Warranty, shipping & returns
-
Warranty
ICON covers its shock absorbers, including the shock in every coilover, for 1 year against manufacturer's defects.- Coverage belongs to the original retail buyer who owns the vehicle the part was first installed on.
- A shock that fails in its first year goes to ICON for inspection and service. If ICON finds the cause was neglect, poor installation or anything other than normal wear and tear, the owner pays for labor, parts and shipping.
- ICON repairs or replaces a defective part, at its discretion. Removal, reinstallation, freight and incidental or consequential costs are not covered, and parts that wear in normal use are not treated as defective.
- Not covered: finish (including finish marks from shipping), alterations or modifications, installation that departs from ICON's instructions, racing use, police, taxi, government or commercial vehicles, and sales outside the United States and Canada.
- ICON shocks leave the factory charged with nitrogen. Letting that charge out can make a shock malfunction, and ICON does not cover a failure caused by low nitrogen pressure.
- To claim, contact us first with your order number and a short description of the problem. We open the claim with ICON for you, and your Prestige Truck receipt is the proof of purchase ICON asks for.
-
Free shipping
Ships free to the lower 48 states, with no minimum order.- Order by 5 PM ET on a business day and it starts processing the same day.
- Most orders arrive within 1-5 business days.
- We email your tracking number as soon as it ships.
-
Inspect on delivery
Coilovers ship assembled and charged with nitrogen: check the springs, shock bodies, reservoir hoses and hardware as soon as the carton arrives, photograph any damage right away, and never let the nitrogen out. Check it as soon as it arrives.- Look for crushed ends, punctures or tears in the carton.
- If something looks wrong, take photos of the box and the parts (and if a driver asks you to sign, note the damage on the receipt).
- Open the box and check the parts against the parts list before you install.
- Email support@prestigetruck.com right away with your order number, a short note and photos. We send a replacement or a full refund at no cost to you.
-
30-day returns
Return it within 30 days of delivery, unused, in the original packaging, with proof of purchase.- Email support@prestigetruck.com with your order number. We reply within 1-2 business days with instructions.
- Damaged, defective or wrong item: we send a prepaid label or arrange a pickup.
- Changed your mind: you pay return shipping. No restocking fee.
- Refunds go back to your original payment method within 7 business days of approval. See our returns policy.