ICON Vehicle Dynamics 2.5 Series Shock Absorbers for 2005-2026 Ford F-250/F-350 Super Duty (Front, 4WD, 7" Lift)
Free gifts included with your order
- Guaranteed FitmentTeam-confirmed fit or money back
- No Sales TaxZero sales tax on every order
- 30-Day Money-Back GuaranteeReturn it within 30 days of delivery for a refund
Questions or a custom quote?
Mon to Fri, 9am to 5pm EST
Complete your upgrade
Fits the same truck
Features
- Tuned for Each Application: ICON sets the length and the damping tune of every 2.5 Series shock for its vehicle, using a one-piece digressive piston and 5WT shock oil that keeps damping steady across a wide temperature range.
- Bump Zone Near Full Compression: On piggyback and selected remote reservoir parts, a billet 6061 manifold under the top cap creates ICON's internal Bump Zone, which adds about 20% more damping force near full compression to fend off harsh bottom outs.
- Reservoir Style Choices: Internal reservoir shocks keep everything in one body. Piggyback shocks carry the reservoir on the shock and remote reservoir shocks put it on a hose, and both add oil and cooling to reduce fade on long, hard runs.
- Compression Adjustment Options: CDCV adds a 10-position compression knob, CDXS splits compression into high-speed and low-speed knobs with 10 settings each, and CDEV changes compression electronically through ICON Intelligent Control. ICON says piggyback and remote reservoir shocks can take a CDCV upgrade later.
- Stout Shaft and Bearings: 2.5 Series shocks use a 7/8" induction-hardened, chrome-plated shaft with PTFE-lined spherical bearings, a strong, low-deflection combination for heavy trucks and rough ground.
- Rebuildable and Revalveable: Every 2.5 Series shock can be rebuilt when worn and revalved for a new load or use, so it can be serviced for years instead of thrown away.
Description & Fitment
This ICON 2.5 Series front shock pair fits the 2005-2026 Ford F-250 and F-350 Super Duty 4WD as part of ICON's 7" lift setup. It suits owners who want damping tuned to the application, with a bump zone that firms up near full compression. Options cover an internal reservoir and a piggyback reservoir, with CDCV versions adding an external compression adjuster with 10 settings. Every shock is rebuildable and revalveable, and an alignment is required after install.
Fitment & Compatibility
| Years | Model | Bed | Notes |
|---|---|---|---|
| 2005-2026 | F-250 Super Duty | 4WD | |
| 2005-2026 | F-350 Super Duty | 4WD |
Check your fit: match your year, model and the notes in each row: 2005-2026 Ford F-250 Super Duty (4WD); 2005-2026 Ford F-350 Super Duty (4WD).
Not for: years, models or trims outside those rows. Other shocks in this line for the same models: 37601P (2.5 Series Shock Absorbers, rear, 3-6" lift, 1999-2025); 37605P (2.5 Series Shock Absorbers, rear, 0-3" lift, 1999-2025); 37701CP/37701P/37705CP/37705P (2.5 Series Shock Absorbers, rear, 3-6"/0-3" lift, 1999-2025); 37701EP (2.5 Series Shock Absorbers, rear, 3-6" lift, 2017-2026); 37705EP (2.5 Series Shock Absorbers, rear, 0-3" lift, 2017-2026); 37710CP/37710P (2.5 Series Shock Absorbers, front, 3-6" lift, 1999-2004).
About ICON Vehicle Dynamics
ICON Vehicle Dynamics designs and builds performance suspension for trucks and SUVs at its shop in Riverside, California. Engineering is led by Dylan Evans, its head engineer and a SCORE champion driver, and ICON tests its parts on the street, on the trail and under race conditions.
ICON's engineers begin with the result they want from a vehicle, then study the forces acting on it in motion, which is where the name Vehicle Dynamics comes from. Fabrication stays in ICON's own shop, from laser cutting and metal forming to CNC machining, welding and final assembly. ICON calls its suspension systems and shock absorbers the top choice for popular trucks and SUVs.
Authorized ICON Vehicle Dynamics dealer. Prestige Truck is an authorized ICON Vehicle Dynamics dealer, so every ICON part we sell is new and genuine. ICON's warranty is for the original retail buyer, on the vehicle the part was first installed on. Keep your Prestige Truck order receipt: we use it when we take a claim to ICON for you.
Frequently Asked Questions
Will this fit my 2005-2026 Ford F-250 Super Duty?
It fits when your vehicle matches one of these rows: 2005-2026 Ford F-250 Super Duty (4WD); 2005-2026 Ford F-350 Super Duty (4WD). If you are unsure about your trim or drivetrain, send us your VIN and we will check it against ICON's application list before you order.
Is an alignment part of the install?
Yes. ICON's install sheet for 67620P calls for the vehicle to be aligned once the shocks is in. The sheet is linked in the Installation section below.
CDCV, CDXS or CDEV: which should I choose?
Pick fixed valving if you want ICON's tune with nothing to adjust. CDCV adds one knob with 10 compression settings, CDXS gives separate high-speed and low-speed knobs with 10 settings each, and CDEV adjusts compression from the cab through ICON Intelligent Control, which needs ICON's IIC module.
Piggyback, remote or internal reservoir: what is the difference?
An internal reservoir shock keeps the nitrogen charge inside the body and is the simplest to fit. A piggyback reservoir rides on the shock body and a remote reservoir sits on a hose nearby; both add oil and cooling, which cuts fade on long, hard drives.
Are these sold as a pair?
Most 2.5 Series part numbers are a pair for one end of the vehicle. A few are single, side-specific shocks, so read the part title and order the driver side and passenger side numbers together where needed.
How often do ICON shocks need service?
ICON's maintenance guide suggests a factory service about every 40,000 miles for street use, or about every 15,000 miles for a mix of street and dirt, and sooner if a shock leaks, rides worse or gets noisy. Wash off salt and mud, wax the bodies once a year and check the nitrogen charge yearly.
Installation
- Jack
- Jack Stands
- Torque Wrench
- 17mm Socket / Wrench
- 18mm Socket / Wrench
- 19mm Socket / Wrench
- 21mm Socket / Wrench
Here's the short version. Follow ICON's install sheet (below) for your vehicle's exact steps and torque values. These steps are for part 67620P; the other parts on this page install from their own ICON sheet below.
- Using a properly rated jack, raise the front of the vehicle and support the frame rails with jack stands. Ensure the jack stands are secure and set properly before lowering the jack. NEVER WORK UNDER AN UNSUPPORTED VEHICLE.
- Use a jack to support the axle and then remove the factory shock using a 17mm and 18mm socket/wrench.
- Install upper shock mount: Install stem hardware as seen in diagram. Install tall nut and fasten bushing assembly until 3-4 threads are exposed for the jam nut. Install nut and torque to 50 ft-lbs while holding with a 19mm wrench.
- Install the lower shock mount: Install the wide heim spacer so that it orients the shock further away from the frame. Install the factory lower bolt using an 18mm socket/wrench. [Torque to factory spec]
- Install wheels and lower vehicle to the ground. [Torque to factory spec]
- Have the vehicle professionally aligned.
- ICON 67620P - 05-UP FSD 7" FRONT 2.5 VS IR PAIR (8-28-2017 REV.A) (PDF)
- ICON 67720CP - 05-UP FSD 4WD 7" FRONT 2.5 VS PB CDCV PAIR (8-28-2017 REV.A) (PDF)
- ICON 67720P - 05-UP FSD 4WD 7" FRONT 2.5 VS PB PAIR (8-28-2017 REV.A) (PDF)
Stuck on a step?
Specifications
| Brand | ICON Vehicle Dynamics |
|---|---|
| Product Type | Shock absorber |
| Series | 2.5 Series (see the part title; a few parts are 2.0 Series) |
| Construction | Nitrogen-charged monotube |
| Adjustment | Fixed valving, or CDCV, CDXS or CDEV where offered |
| Shock Oil | 5WT |
| Service | Fully rebuildable and revalveable |
| Position | Front |
| Lift | 7" |
| In the Box | Pair of shocks (one per side) |
| Part number | 67620P |
| UPC | 840103405858 |
| Part # | Configuration | UPC |
|---|---|---|
| 67620P | Internal reservoir | 840103405858 |
| 67720CP | Piggyback with CDCV | 840103405896 |
| 67720P | Piggyback | 840103405902 |
Warranty, shipping & returns
-
Warranty
ICON covers its shock absorbers, including the shock in every coilover, for 1 year against manufacturer's defects.- Coverage belongs to the original retail buyer who owns the vehicle the part was first installed on.
- A shock that fails in its first year goes to ICON for inspection and service. If ICON finds the cause was neglect, poor installation or anything other than normal wear and tear, the owner pays for labor, parts and shipping.
- ICON repairs or replaces a defective part, at its discretion. Removal, reinstallation, freight and incidental or consequential costs are not covered, and parts that wear in normal use are not treated as defective.
- Not covered: finish (including finish marks from shipping), alterations or modifications, installation that departs from ICON's instructions, racing use, police, taxi, government or commercial vehicles, and sales outside the United States and Canada.
- ICON shocks leave the factory charged with nitrogen. Letting that charge out can make a shock malfunction, and ICON does not cover a failure caused by low nitrogen pressure.
- To claim, contact us first with your order number and a short description of the problem. We open the claim with ICON for you, and your Prestige Truck receipt is the proof of purchase ICON asks for.
-
Free shipping
Ships free to the lower 48 states, with no minimum order.- Order by 5 PM ET on a business day and it starts processing the same day.
- Most orders arrive within 1-5 business days.
- We email your tracking number as soon as it ships.
-
Inspect on delivery
These shocks ship charged with nitrogen: check each body, shaft, reservoir hose and adjuster knob as soon as the carton arrives, photograph any damage right away, and never let the nitrogen out. Check it as soon as it arrives.- Look for crushed ends, punctures or tears in the carton.
- If something looks wrong, take photos of the box and the parts (and if a driver asks you to sign, note the damage on the receipt).
- Open the box and check the parts against the parts list before you install.
- Email support@prestigetruck.com right away with your order number, a short note and photos. We send a replacement or a full refund at no cost to you.
-
30-day returns
Return it within 30 days of delivery, unused, in the original packaging, with proof of purchase.- Email support@prestigetruck.com with your order number. We reply within 1-2 business days with instructions.
- Damaged, defective or wrong item: we send a prepaid label or arrange a pickup.
- Changed your mind: you pay return shipping. No restocking fee.
- Refunds go back to your original payment method within 7 business days of approval. See our returns policy.