ICON Vehicle Dynamics Billet Upper Trailing Arm Kit for 2021-2026 Ford Bronco (Rear)
Free gifts included with your order
- Guaranteed FitmentTeam-confirmed fit or money back
- No Sales TaxZero sales tax on every order
- 30-Day Money-Back GuaranteeReturn it within 30 days of delivery for a refund
Questions or a custom quote?
Mon to Fri, 9am to 5pm EST
Complete your upgrade
Fits the same truck
Features
- 6061 Billet Aluminum Arms: These rear upper trailing arms are machined by ICON from 6061 billet aluminum and anodized.
- Adjustable on the Vehicle: Length adjusts on the vehicle through ICON's double adjuster and PTFE-lined FK rod ends.
- Made for the Bronco Rear: Sized for the rear upper trailing arm position on the 2021-2026 Ford Bronco.
- Greaseless Bushings: The bushings are greaseless multi durometer units.
- Tubular Version Available: ICON also sells a tubular version (44100T), listed with the lower control arm parts.
- ICON Limited Warranty: ICON's published limited warranty covers the original buyer on the vehicle the part was first installed on. Contact us first and we open the claim with ICON.
Description & Fitment
This ICON rear billet upper trailing arm kit fits the 2021-2026 Ford Bronco. The arms are 6061 billet aluminum, machined by ICON and anodized. Length adjusts on the vehicle through ICON's double adjuster and PTFE-lined FK rod ends, with greaseless multi durometer bushings. A tubular version is also available, and the kit carries the ICON limited warranty.
Fitment & Compatibility
| Years | Model | Bed | Notes |
|---|---|---|---|
| 2021-2026 | Bronco | — |
Check your fit: match your year, model and the notes in each row: 2021-2026 Ford Bronco.
Not for: years, models or trims outside those rows. Other steering and arm parts in this line for the same model: 45212 (Extreme Duty Tie Rod Kit, 2021-2026).
About ICON Vehicle Dynamics
ICON Vehicle Dynamics designs and builds performance suspension for trucks and SUVs at its shop in Riverside, California. Engineering is led by Dylan Evans, its head engineer and a SCORE champion driver, and ICON tests its parts on the street, on the trail and under race conditions.
ICON's engineers begin with the result they want from a vehicle, then study the forces acting on it in motion, which is where the name Vehicle Dynamics comes from. Fabrication stays in ICON's own shop, from laser cutting and metal forming to CNC machining, welding and final assembly. ICON calls its suspension systems and shock absorbers the top choice for popular trucks and SUVs.
Authorized ICON Vehicle Dynamics dealer. Prestige Truck is an authorized ICON Vehicle Dynamics dealer, so every ICON part we sell is new and genuine. ICON's warranty is for the original retail buyer, on the vehicle the part was first installed on. Keep your Prestige Truck order receipt: we use it when we take a claim to ICON for you.
Frequently Asked Questions
Will this fit my 2021-2026 Ford Bronco?
It fits when your vehicle matches one of these rows: 2021-2026 Ford Bronco. If you are unsure about your trim or drivetrain, send us your VIN and we will check it against ICON's application list before you order.
Will I have to cut or drill anything?
Yes, ICON's install sheet for 44100 includes drilling, cutting or trimming. Read the sheet in the Installation section below before you start, or have a shop do the work.
Do I need stronger tie rods?
ICON recommends its XD Forged Tie Rods for vehicles running big tires off-road, where factory tie rods are known to bend. For mild use the stock parts may be enough.
Will they clear my wheels?
ICON keeps the stock bend on the outer tie rod so it fits the factory wheel sizes and offsets, and most aftermarket wheels.
Do the joints need greasing?
Yes, ICON's outer tie rod joints are greaseable, which it says extends service life. Grease them as part of your normal service.
What warranty applies?
ICON's published limited warranty applies to these parts, for the original buyer and the vehicle they were first installed on. Contact us first for a claim and we will open it with ICON.
Installation
- Floor Jack
- Jack Stands (4)
- Cut-Off Wheel
- Torque Wrench
- Flat Screwdriver
- Soft Dead Blow Hammer
- Pry Bar
- Spud Bar
- Fuel Line Disconnect Tool.
- Rest on ICON's sheet
Here's the short version. Follow ICON's install sheet (below) for your vehicle's exact steps and torque values.
- Ensure the vehicle is parked on a flat, level surface with the transmission in PARK the parking brake set and the engine turned off.
- Install the passenger side lower link first, which will require lowering the fuel tank to access the frame-side pivot bolts. Begin by disconnecting the wiring harness from the rear of the fuel tank.
- Remove the retaining clip and disconnect the fuel line. A small pick may be used to carefully pull the retaining clip.
- Use a 24mm deep socket and ratchet or driver to remove the nut from the upper link pivot bolt, frame end.
- Re-install the OE pivot bolt through the INBOARD side of the bracket (opposite of the stock configuration), and tap into place while making sure that the keeper tab on the bolt slips into the hole in the bracket that had been enlarged in the previous step.
- If custom pinion angle is desired you can adjust this with the vehicle on the ground. Do not adjust further than 3.375" from the center of the rod end to the edge of the billet link.
Stuck on a step?
Specifications
| Brand | ICON Vehicle Dynamics |
|---|---|
| Part Number | 44100 |
| Construction | 4140 chromoly and forged steel tie rods; 6061 billet aluminum arms |
| Position | Rear |
| Finish | Anodized 6061 aluminum |
| UPC | 840103411811 |
Warranty, shipping & returns
-
Warranty
ICON's published limited warranty applies to this part, and we handle any claim with ICON for you.- Coverage belongs to the original retail buyer who owns the vehicle the part was first installed on.
- ICON parts must go on as the complete kit shown in ICON's application guide. Swapping out or leaving off a required part voids the warranty.
- ICON repairs or replaces a defective part, at its discretion. Removal, reinstallation, freight and incidental or consequential costs are not covered, and parts that wear in normal use are not treated as defective.
- Not covered: finish (including finish marks from shipping), alterations or modifications, installation that departs from ICON's instructions, racing use, police, taxi, government or commercial vehicles, and sales outside the United States and Canada.
- To claim, contact us first with your order number and a short description of the problem. We open the claim with ICON for you, and your Prestige Truck receipt is the proof of purchase ICON asks for.
-
Free shipping
Ships free to the lower 48 states, with no minimum order.- Order by 5 PM ET on a business day and it starts processing the same day.
- Most orders arrive within 1-5 business days.
- We email your tracking number as soon as it ships.
-
Inspect on delivery
Check each tie rod, joint, arm and the hardware bag as soon as the carton arrives, and photograph any damage before installation. Check it as soon as it arrives.- Look for crushed ends, punctures or tears in the carton.
- If something looks wrong, take photos of the box and the parts (and if a driver asks you to sign, note the damage on the receipt).
- Open the box and check the parts against the parts list before you install.
- Email support@prestigetruck.com right away with your order number, a short note and photos. We send a replacement or a full refund at no cost to you.
-
30-day returns
Return it within 30 days of delivery, unused, in the original packaging, with proof of purchase.- Email support@prestigetruck.com with your order number. We reply within 1-2 business days with instructions.
- Damaged, defective or wrong item: we send a prepaid label or arrange a pickup.
- Changed your mind: you pay return shipping. No restocking fee.
- Refunds go back to your original payment method within 7 business days of approval. See our returns policy.