ICON Vehicle Dynamics Box Kit for 2000-2005 Ford Excursion/F-250 Super Duty/F-350 Super Duty (Front, 4-8" Lift)
Free gifts included with your order
- Guaranteed FitmentTeam-confirmed fit or money back
- No Sales TaxZero sales tax on every order
- 30-Day Money-Back GuaranteeReturn it within 30 days of delivery for a refund
Questions or a custom quote?
Mon to Fri, 9am to 5pm EST
Complete your upgrade
Fits the same truck
Features
- Parts That Complete a Lift: Box kits gather the brackets, spacers, links and hardware an ICON lift system needs beyond its shocks and springs, packed for one platform and lift height.
- Matched to ICON Lift Systems: Each part is listed for a specific ICON lift height and platform, so the pieces fit with the rest of the ICON system on the truck.
- Drop Brackets Restore Geometry: Most box kits include track bar, sway bar, radius arm or crossmember brackets that bring the suspension back toward its factory angles after the lift.
- Laser-Cut Steel Brackets: Where a kit includes brackets, ICON typically forms them from laser-cut steel plate.
- Check Your System First: Complete ICON systems normally include their box kits; these listings are for building a system from parts or replacing a box kit.
- Contents Listed per Kit: Each listing names what is in the box, so you can match it to your lift before ordering.
Description & Fitment
ICON designed this front box kit around the 2000-2005 Ford Excursion, 2000-2004 Ford F-250 Super Duty and 2000-2004 Ford F-350 Super Duty, for 4WD models. A box kit gathers many of the smaller parts an ICON 4-6" lift system needs. In the box: a front track bar drop bracket formed from laser-cut steel plate, with the parts that go with it. ICON lists it for a 4-8" lift.
Fitment & Compatibility
| Years | Model | Bed | Notes |
|---|---|---|---|
| 2000-2005 | Excursion | 4WD; 4-8" lift | |
| 2000-2004 | F-250 Super Duty | 4WD; 4-8" lift | |
| 2000-2004 | F-350 Super Duty | 4WD; 4-8" lift |
Check your fit: match your year, model and the notes in each row: 2000-2005 Ford Excursion (4WD; 4-8" lift); 2000-2004 Ford F-250 Super Duty (4WD; 4-8" lift); 2000-2004 Ford F-350 Super Duty (4WD; 4-8" lift).
Not for: years, models or trims outside those rows. Other lift kit components in this line for the same models: 191201 (1" Cast Block Kit, 2008-2026); 194275/195275 (Block Kit, rear, 1999-2026); 196275 (6" Block Kit, rear, 1999-2007); 196276 (6" Offset Block Kit, rear, 2008-2026); 61110/61111 (Extended Stainless Brake Line Kit, front, 4.5-7"/2.5" lift, 2017-2026); 64000/67010 (Box Kit, front, 4.5"/7" lift, 2005-2007).
About ICON Vehicle Dynamics
ICON Vehicle Dynamics designs and builds performance suspension for trucks and SUVs at its shop in Riverside, California. Engineering is led by Dylan Evans, its head engineer and a SCORE champion driver, and ICON tests its parts on the street, on the trail and under race conditions.
ICON's engineers begin with the result they want from a vehicle, then study the forces acting on it in motion, which is where the name Vehicle Dynamics comes from. Fabrication stays in ICON's own shop, from laser cutting and metal forming to CNC machining, welding and final assembly. ICON calls its suspension systems and shock absorbers the top choice for popular trucks and SUVs.
Authorized ICON Vehicle Dynamics dealer. Prestige Truck is an authorized ICON Vehicle Dynamics dealer, so every ICON part we sell is new and genuine. ICON's warranty is for the original retail buyer, on the vehicle the part was first installed on. Keep your Prestige Truck order receipt: we use it when we take a claim to ICON for you.
Frequently Asked Questions
Will this fit my 2000-2005 Ford Excursion?
It fits when your vehicle matches one of these rows: 2000-2005 Ford Excursion (4WD; 4-8" lift); 2000-2004 Ford F-250 Super Duty (4WD; 4-8" lift); 2000-2004 Ford F-350 Super Duty (4WD; 4-8" lift). If you are unsure about your trim or drivetrain, send us your VIN and we will check it against ICON's application list before you order.
Where are the install instructions?
Yes. ICON's install sheet for 31020 is linked in the Installation section below, with its steps condensed on this page. Use the sheet for the torque values.
What is an ICON box kit?
It is the set of brackets, spacers and smaller parts an ICON lift system needs alongside its shocks and springs. Each box kit is built for one platform and lift height, named in its title.
Do I need a box kit if I bought a full ICON system?
Complete ICON systems normally include their box kits. These listings are for owners building a system from parts or replacing a box kit, so check the title against your lift height.
Are the brake lines needed on a smaller lift?
ICON lists each brake line kit for a lift range. Pick the one that matches your lift so the lines reach at full droop without being stretched.
What warranty applies?
ICON's published limited warranty applies to these parts, for the original buyer and the vehicle they were first installed on. Contact us first for a claim and we will open it with ICON.
Installation
- Floor Jack
- Jack Stands
- Pitman Arm Puller
- Torque Wrench
- 8mm Socket / Wrench
- 13mm Socket / Wrench
- 15mm Socket / Wrench
- 18mm Socket / Wrench
- Rest on ICON's sheet
Here's the short version. Follow ICON's install sheet (below) for your vehicle's exact steps and torque values.
- Jack up the front end of the truck and support the frame at the front frame rails with jack stands. NEVER WORK UNDER AN UNSUPPORTED VEHICLE. Remove front tires.
- Remove the bolts securing the front drive shaft to the axle yoke. Tape the bearing caps on the front u-joint and remove the drive shaft from the transfer case. Remove all four u-bolts from the front axel.
- Place the enclosed pan-rod bracket into position where the original bracket was. Reinstall the three original bolts with red Loctite and torque to 30 ft/lbs.
- Slide one of the new leaf springs into the front spring hanger, the double wrapped bushing end will go towards the front. Reinstall the factory bolts and nuts but do not fully torque.
- Torque the front u-bolts to 85 ft/lbs. Raise the pan-rod bar to align it with the new pan-rod bracket. Install the original nut and torque to 369ft/lbs (FORD factory specs).
- Install rear block kit and shocks at this time.
Stuck on a step?
Specifications
| Brand | ICON Vehicle Dynamics |
|---|---|
| Part Number | 31020 |
| Position | Front |
| Lift | 4-8" |
| In the Box | Front track bar drop bracket formed from laser-cut steel plate, with the parts that go with it |
| UPC | 840103402116 |
Warranty, shipping & returns
-
Warranty
ICON's published limited warranty applies to this part, and we handle any claim with ICON for you.- Coverage belongs to the original retail buyer who owns the vehicle the part was first installed on.
- ICON parts must go on as the complete kit shown in ICON's application guide. Swapping out or leaving off a required part voids the warranty.
- ICON repairs or replaces a defective part, at its discretion. Removal, reinstallation, freight and incidental or consequential costs are not covered, and parts that wear in normal use are not treated as defective.
- Not covered: finish (including finish marks from shipping), alterations or modifications, installation that departs from ICON's instructions, racing use, police, taxi, government or commercial vehicles, and sales outside the United States and Canada.
- To claim, contact us first with your order number and a short description of the problem. We open the claim with ICON for you, and your Prestige Truck receipt is the proof of purchase ICON asks for.
-
Free shipping
Ships free to the lower 48 states, with no minimum order.- Order by 5 PM ET on a business day and it starts processing the same day.
- Most orders arrive within 1-5 business days.
- We email your tracking number as soon as it ships.
-
Inspect on delivery
Open the box kit or block kit as soon as it arrives, check every bracket, block, line and hardware bag against ICON's parts list, and photograph any damage before installation. Check it as soon as it arrives.- Look for crushed ends, punctures or tears in the carton.
- If something looks wrong, take photos of the box and the parts (and if a driver asks you to sign, note the damage on the receipt).
- Open the box and check the parts against the parts list before you install.
- Email support@prestigetruck.com right away with your order number, a short note and photos. We send a replacement or a full refund at no cost to you.
-
30-day returns
Return it within 30 days of delivery, unused, in the original packaging, with proof of purchase.- Email support@prestigetruck.com with your order number. We reply within 1-2 business days with instructions.
- Damaged, defective or wrong item: we send a prepaid label or arrange a pickup.
- Changed your mind: you pay return shipping. No restocking fee.
- Refunds go back to your original payment method within 7 business days of approval. See our returns policy.