ICON Vehicle Dynamics Dual Rate Coil Spring Kit w/ Caster Cams for 2023 Ford F-250/F-350 Super Duty (Front, Gas, 2.5" Lift)

$495.90
FREE SHIPPINGNo sales tax Only 1 leftIn stock now  Estimated delivery
Verify fitment with your vehicle
GO
Clear

Flash Sale Ends in--:--:--

Free gifts included with your order

Details for ACCESS TrailSeal Tailgate Seal Gasket, 8.5 ft (30946) (opens in a new tab)
Details for ACCESS EZ-Retriever II Truck Bed Cargo Reach Tool, 5 ft (70950) (opens in a new tab)
Prestige Truck customer support

Questions or a custom quote?

Mon to Fri, 9am to 5pm EST

Features

  • Rate Chosen per Vehicle: ICON picks the spring rate for each vehicle and lift height, using dual rate, triple rate or performance designs depending on the part.
  • Lift and Ground Clearance: Taller springs raise the ride height by the amount ICON lists for each part, adding ground clearance and room for larger tires.
  • Built for One Position: Each kit is made for the front or rear of its vehicle, as named in the title.
  • Progressive Spring Designs: Dual and triple rate springs start soft for small bumps and firm up deeper in the travel, so ride quality holds up as the load changes.
  • Caster Cams Included: This kit includes caster cams, which help bring caster back into range once the front end is raised.
  • Part of ICON's Systems: These springs come from the same development work as ICON's Stage suspension systems, so they pair with ICON shocks and lift parts.

Description & Fitment

This ICON Vehicle Dynamics front dual rate coil spring kit fits 4WD, gas engine versions of the 2023 Ford F-250 Super Duty and F-350 Super Duty with a 2.5" lift. Each spring has a soft rate for ride comfort and a firm rate for control. Caster cams are included to help bring caster back into range after the lift. The spring rate is chosen per vehicle, and an alignment is advised after install.

Fitment & Compatibility

Ford
Years Model Bed Notes
2023 F-250 Super Duty 4WD; gas
2023 F-350 Super Duty 4WD; gas

Check your fit: match your year, model and the notes in each row: 2023 Ford F-250 Super Duty (4WD; gas); 2023 Ford F-350 Super Duty (4WD; gas).

Not for: years, models or trims outside those rows. Other coil spring kits in this line for the same models: 62510/64010 (Dual Rate Coil Spring Kit, front, 2.5"/4.5" lift, 2005-2019); 62511/64011 (Dual Rate Coil Spring Kit, front, 2.5"/4.5" lift, 2020-2022); 62512 (Dual Rate Coil Spring Kit w/ Caster Cams, front, 2.5" lift, 2023); 62516 (Dual Rate Coil Spring Kit, front, 2.5" lift, 2023-2026); 62517 (Dual Rate Coil Spring Kit, front, 2.5" lift, 2023-2026); 64012 (Dual Rate Coil Spring Kit, front, 4.5" lift, 2023-2026).

About ICON Vehicle Dynamics

ICON.

ICON Vehicle Dynamics designs and builds performance suspension for trucks and SUVs at its shop in Riverside, California. Engineering is led by Dylan Evans, its head engineer and a SCORE champion driver, and ICON tests its parts on the street, on the trail and under race conditions.

ICON's engineers begin with the result they want from a vehicle, then study the forces acting on it in motion, which is where the name Vehicle Dynamics comes from. Fabrication stays in ICON's own shop, from laser cutting and metal forming to CNC machining, welding and final assembly. ICON calls its suspension systems and shock absorbers the top choice for popular trucks and SUVs.

Authorized ICON Vehicle Dynamics dealer. Prestige Truck is an authorized ICON Vehicle Dynamics dealer, so every ICON part we sell is new and genuine. ICON's warranty is for the original retail buyer, on the vehicle the part was first installed on. Keep your Prestige Truck order receipt: we use it when we take a claim to ICON for you.

Frequently Asked Questions

Will this fit my 2023 Ford F-250 Super Duty?

It fits when your vehicle matches one of these rows: 2023 Ford F-250 Super Duty (4WD; gas); 2023 Ford F-350 Super Duty (4WD; gas). If you are unsure about your trim or drivetrain, send us your VIN and we will check it against ICON's application list before you order.

Will I need an alignment afterward?

Yes. ICON's install sheet for 62513 calls for the vehicle to be aligned once the spring kit is in. The sheet is linked in the Installation section below.

Dual rate or triple rate: what is the difference?

Both start soft and firm up as the spring compresses. A triple rate spring adds a third stage, so the change in feel is more gradual. ICON chooses the design for each vehicle, and the part title names it.

Do I need new shocks with these springs?

ICON designs these springs as part of its suspension systems. Check the fitment notes for your part, and match the shocks to the lift height you choose.

Will I need an alignment?

Lifting the front of a vehicle changes its alignment, and ICON calls for an alignment after many of its front spring installs. The Installation section of each part shows what ICON asks for.

What warranty applies?

ICON's published limited warranty applies to its coil springs, for the original buyer and the vehicle they were first installed on. Contact us first for a claim and we will open it with ICON.

Installation

Recommended installationProfessional
TypeCoil spring replacement at the factory spring seats
Tools
  • Jack
  • Jack Stands
  • Pliers
  • Torque Wrench
  • Hammer
  • Ball Joint Separator
  • 3/4" Socket / Wrench
  • 10mm Socket / Wrench
  • Rest on ICON's sheet
What's involvedThe brake line brackets, front shocks and sway bar links are disconnected and the axle lowered to install the new coils with the original rubber isolatorseverything is reconnected, then the vehicle needs an alignment and a re-torque after 100 miles.

Here's the short version. Follow ICON's install sheet (below) for your vehicle's exact steps and torque values.

  1. Using a properly rated jack, raise the front of the vehicle and support the frame rails with jack stands. Ensure the jack stands are secure and set properly before lowering the jack. NEVER WORK UNDER AN UNSUPPORTED VEHICLE.
  2. Disconnect the upper brake line brackets from the frame using a 13mm socket/wrench and lower brake line brackets from the differential using a 10mm socket/ wrench.
  3. Lower the axle just enough to install the new springs. Place the original rubber isolator on top of the new coil and install. Be careful to not stretch or damage any lines.
  4. Lift the axle high enough to connect the shocks but be careful not to lift the truck off of its supports. Use the original bolt on the lower shock mount and tighten with an 18mm socket/wrench [Torque to factory spec].
  5. Connect the sway bar links to the sway bar using an 18mm socket/wrench. [Torque to factory spec]
  6. Have the vehicle professionally aligned.

Stuck on a step? Ask our install experts

Specifications

Specifications
BrandICON Vehicle Dynamics
Part Number62513
Product TypeCoil spring kit
PositionFront
Lift2.5"
UPC840103426358

Warranty, shipping & returns

  • Warranty

    ICON's published limited warranty applies to this part, and we handle any claim with ICON for you.
    • Coverage belongs to the original retail buyer who owns the vehicle the part was first installed on.
    • ICON parts must go on as the complete kit shown in ICON's application guide. Swapping out or leaving off a required part voids the warranty.
    • ICON repairs or replaces a defective part, at its discretion. Removal, reinstallation, freight and incidental or consequential costs are not covered, and parts that wear in normal use are not treated as defective.
    • Not covered: finish (including finish marks from shipping), alterations or modifications, installation that departs from ICON's instructions, racing use, police, taxi, government or commercial vehicles, and sales outside the United States and Canada.
    • To claim, contact us first with your order number and a short description of the problem. We open the claim with ICON for you, and your Prestige Truck receipt is the proof of purchase ICON asks for.
  • Free shipping

    Ships free to the lower 48 states, with no minimum order.
    • Order by 5 PM ET on a business day and it starts processing the same day.
    • Most orders arrive within 1-5 business days.
    • We email your tracking number as soon as it ships.
  • Inspect on delivery

    Check each spring, its coating and any isolators or cams in the box as soon as the carton arrives, and photograph any damage before installation. Check it as soon as it arrives.
    • Look for crushed ends, punctures or tears in the carton.
    • If something looks wrong, take photos of the box and the parts (and if a driver asks you to sign, note the damage on the receipt).
    • Open the box and check the parts against the parts list before you install.
    • Email support@prestigetruck.com right away with your order number, a short note and photos. We send a replacement or a full refund at no cost to you.
  • 30-day returns

    Return it within 30 days of delivery, unused, in the original packaging, with proof of purchase.
    • Email support@prestigetruck.com with your order number. We reply within 1-2 business days with instructions.
    • Damaged, defective or wrong item: we send a prepaid label or arrange a pickup.
    • Changed your mind: you pay return shipping. No restocking fee.
    • Refunds go back to your original payment method within 7 business days of approval. See our returns policy.
Questions about fit or install?Chat with our team, Mon to Fri, 9am to 5pm EST.Ask a question