ICON Vehicle Dynamics Stage Suspension System for 2022-2026 Toyota Tundra (VS 2.5 Stage 9 to 11 / VS 3.0 Stage 1 to 3, CDXS, w/o Factory Air Suspension)

$5,906.55
FREE SHIPPINGNo sales tax Only 1 leftIn stock now  Estimated delivery
Verify fitment with your vehicle
GO
Clear

Configuration
Flash Sale Ends in--:--:--

Free gifts included with your order

Details for ACCESS TrailSeal Tailgate Seal Gasket, 8.5 ft (30946) (opens in a new tab)
Details for ACCESS EZ-Retriever II Truck Bed Cargo Reach Tool, 5 ft (70950) (opens in a new tab)
Prestige Truck customer support

Questions or a custom quote?

Mon to Fri, 9am to 5pm EST

See it on a truck

Built in Stages Built in Stages
Engineered Per Platform Engineered Per Platform
Serviceable ICON Shocks Serviceable ICON Shocks
Adjustable Valving Options Adjustable Valving Options
Upper Control Arm Choices Upper Control Arm Choices
Lift Quoted on Stock Vehicles Lift Quoted on Stock Vehicles

Features

  • Built in Stages: Each vehicle's systems climb from an entry stage upward, so the suspension can match a daily driver, a tow rig or a dedicated trail truck. The stage number tells you where a kit sits.
  • Engineered Per Platform: ICON develops each system around one vehicle's geometry, choosing shock lengths, valving and spring rates for that platform instead of adapting a universal kit.
  • Serviceable ICON Shocks: The ICON shocks in every stage are fully rebuildable and re-tunable, so worn seals or a change in how the truck is used means a rebuild or revalve, not new shocks.
  • Adjustable Valving Options: Higher stages on many vehicles add CDCV valves with 10 compression settings, CDXS valves with separate low-speed and high-speed adjustment, or CDEV valves that ICON Intelligent Control adjusts on the move.
  • Upper Control Arm Choices: Where a stage adds upper control arms, choose billet aluminum arms with caster and camber adjustment on the vehicle, or tubular steel arms with extra caster built in. Both correct front-end geometry at the lifted height.
  • Lift Quoted on Stock Vehicles: Every lift range is quoted for a stock-equipped vehicle. Bumpers, winches and other added weight change where the height settles, so allow for them when choosing a kit.

Description & Fitment

The ICON Stage Suspension System is a staged kit for the 2022-2026 Toyota Tundra without factory air suspension, with CDXS valving. VS 2.5 Stage 9 includes upper control arms, front coilovers and rear shocks, and Stage 11 adds upper and lower links, a track bar and triple rate rear coil springs. VS 3.0 Stages 1 to 3 swap in front VS 3.0 coilovers and rear VS 3.0 shocks. The 16 part numbers span billet or tubular upper control arms and several lift ranges, and an alignment is needed after install.

Fitment & Compatibility

Toyota
Years Model Bed Notes
2022-2026 Tundra excludes factory air suspension

Check your fit: match your year, model and the notes in each row: 2022-2026 Toyota Tundra (excludes factory air suspension). Also needed, per ICON, by version: K53199D: ICON part 55164, an ADAS (driver assistance) recalibration after the install and ICON part 55156; K53199TD: ICON part 55164, an ADAS (driver assistance) recalibration after the install, ICON part 55156 and ICON part 55156 (in); K53200D/K53200TD/K53201D/K53201DS/K53201TD/K53201TDS/K53211D/K53211TD/K53212D/K53212TD/K53213D/K53213DS/K53213TD/K53213TDS: ICON parts 55153 and 55164, an ADAS (driver assistance) recalibration after the install, ICON parts 55156 and 55153 and ICON part 55153.

Not for: years, models or trims outside those rows (factory air suspension excluded). Other suspension systems in this line for the same models: K53193/K53194/K53194T/K53195/K53195T/K53196/K53196T/K53197/K53197T/K53198/K53198T/K53202/K53202T/K53203/K53203T/K53204/K53204S/K53204T/K53204TS/K53214/K53214T/K53215/K53215T/K53216/K53216S/K53216T/K53216TS (Stage Suspension System, 1.25-2.25"/1.25-3.5"/2-3.5"/1.25-3.25"/2-3.25" lift, 2022-2026); K53276D/K53276TD/K53277D/K53277TD (Stage Suspension System, 6" lift, 2022-2024); K53199/K53199T/K53200/K53200T/K53201/K53201T/K53211/K53211T/K53212/K53212T/K53213/K53213T (Stage Suspension System, 1.25-3.5"/2-3.5"/1.25-3.25"/2-3.25" lift, 2022-2026); K53201S/K53201TS/K53213S/K53213TS (Stage Suspension System, 1.25-3.5"/2-3.5"/1.25-3.25"/2-3.25" lift, 2022-2026); K53021/K53022/K53023/K53024/K53025/K53025T/K53026/K53026T/K53027/K53027T/K53226 (Stage Suspension System, 1-3"/0-2.25" lift, 2007-2021); K53031/K53032/K53033 (Stage Suspension System, 0-2.5" lift, 2000-2006).

About ICON Vehicle Dynamics

ICON.

ICON Vehicle Dynamics designs and builds performance suspension for trucks and SUVs at its shop in Riverside, California. Engineering is led by Dylan Evans, its head engineer and a SCORE champion driver, and ICON tests its parts on the street, on the trail and under race conditions.

ICON's engineers begin with the result they want from a vehicle, then study the forces acting on it in motion, which is where the name Vehicle Dynamics comes from. Fabrication stays in ICON's own shop, from laser cutting and metal forming to CNC machining, welding and final assembly. ICON calls its suspension systems and shock absorbers the top choice for popular trucks and SUVs.

Authorized ICON Vehicle Dynamics dealer. Prestige Truck is an authorized ICON Vehicle Dynamics dealer, so every ICON part we sell is new and genuine. ICON's warranty is for the original retail buyer, on the vehicle the part was first installed on. Keep your Prestige Truck order receipt: we use it when we take a claim to ICON for you.

Frequently Asked Questions

Will this fit my 2022-2026 Toyota Tundra?

It fits when your vehicle matches one of these rows: 2022-2026 Toyota Tundra (excludes factory air suspension). If you are unsure about your trim or drivetrain, send us your VIN and we will check it against ICON's application list before you order.

Will I need an alignment afterward?

Yes. ICON's install sheet for K53199D calls for the vehicle to be aligned once the system is in. The sheet is linked in the Installation section below.

Which stage should I choose?

Start from how the vehicle is used. Entry stages improve ride quality and set the stance for daily driving, towing and light trail work, while higher stages add parts such as upper control arms, adjustable valving and rear links for harder off-road driving. The In the Box column of the Versions table shows what each stage adds.

CDCV, CDXS or CDEV: what is the difference?

CDCV is an external knob with 10 compression settings from soft to firm. CDXS adjusts low-speed and high-speed compression separately. CDEV is an electronic valve that ICON Intelligent Control adjusts from onboard sensors, through the ICON app.

Will I need an alignment after installing?

Yes, whenever the system changes the front suspension. ICON calls for a professional alignment, and many late-model vehicles also need their driver-assist cameras and sensors recalibrated.

How much does the lift change with a bumper or winch?

ICON quotes every lift range for a stock-equipped vehicle. A steel bumper, winch or other weight up front settles the vehicle lower in that range, so plan for it when you pick the lift option.

Installation

Install time 5-6 hours
Recommended installationProfessional
TypeStaged suspension systemcontents vary by stage
Tools
  • Jack
  • Jack Stands
  • Hammer
  • Balljoint Separator
  • Flat Blade Screwdriver
  • Pliers
  • Torque Wrench
  • Ratchet
  • Rest on ICON's sheet
What's involvedWith the speed sensor removed and upper ball joint separated, the factory front coilovers come out and ICON 2.5 remote-reservoir coilovers go inthe lower shock pocket is ground or cut and painted, then alignment and a 100-mile re-torque.

Here's the short version. Follow ICON's install sheet (below) for your vehicle's exact steps and torque values. These steps are for the 58770X; the other parts on this page install from their own ICON sheet below.

  1. Lift vehicle and securely place heavy duty jack stands under the manufacturer recommended lifting locations for the front of the vehicle. Take care when lifting the vehicle, and allow 3-4" of ground clearance from the tire.
  2. Remove the wheel speed sensor from the front side of the spindle using a 10mm. Remove the bracket from the spindle using a 12mm.
  3. Use a balljoint separator or a hammer to loosen the balljoint taper from the spindle. Once loose, remove the nut and support the spindle so it does not fall free.
  4. Reinstall the control arm now, if removed.
  5. Install the upper control arm balljoint into the spindle and secure with the nut.
  6. Get vehicle professionally aligned.

Stuck on a step? Ask our install experts

Specifications

Specifications
BrandICON Vehicle Dynamics
Product TypeStaged suspension system
Lift Measured OnStock-equipped vehicle
ContentsBy stage; see In the Box in the Versions table
AfterwardProfessional alignment where the front suspension changes
Lift1.25-3.5"; 2-3.5"; 1.25-3.25"; 2-3.25"
Part numberK53199D
UPC840103432977
Versions
Part # Configuration In the Box UPC
K53199D 1.25-3.5" 9 2.5 Billet 58561DJ (billet upper control arms), 58770X (front VS 2.5 remote reservoir CDXS coilovers), 57840XP (rear VS 2.5 remote reservoir CDXS shocks) 840103432977
K53199TD 2-3.5" 9 2.5 Tubular 58770X (front VS 2.5 remote reservoir CDXS coilovers), 57840XP (rear VS 2.5 remote reservoir CDXS shocks), 58461DJ (tubular upper control arms) 840103432960
K53200D 1.25-3.5" 10 2.5 Billet 58561DJ (billet upper control arms), 58770X (front VS 2.5 remote reservoir CDXS coilovers), 57840XP (rear VS 2.5 remote reservoir CDXS shocks), 54102 (billet upper links), 54002 (billet lower links) 840103432991
K53200TD 2-3.5" 10 2.5 Tubular 58770X (front VS 2.5 remote reservoir CDXS coilovers), 57840XP (rear VS 2.5 remote reservoir CDXS shocks), 58461DJ (tubular upper control arms) 840103432984
K53201D 1.25-3.5" 11 2.5 Billet 58561DJ (billet upper control arms), 58770X (front VS 2.5 remote reservoir CDXS coilovers), 57840XP (rear VS 2.5 remote reservoir CDXS shocks), 54102 (billet upper links), 54002 (billet lower links), 54202 (billet track bar), 51210 (triple rate rear coil springs) 840103433028
K53201DS 1.25-3.5" 11 TRD 2.5 Billet 58561DJ (billet upper control arms), 58770X (front VS 2.5 remote reservoir CDXS coilovers), 57840XP (rear VS 2.5 remote reservoir CDXS shocks), 54102 (billet upper links), 54002 (billet lower links), 54202 (billet track bar), 51211 (triple rate rear coil springs) 840103433035
K53201TD 2-3.5" 11 2.5 Tubular 58770X (front VS 2.5 remote reservoir CDXS coilovers), 57840XP (rear VS 2.5 remote reservoir CDXS shocks), 58461DJ (tubular upper control arms), 54202 (billet track bar), 51210 (triple rate rear coil springs) 840103433004
K53201TDS 2-3.5" 11 TRD 2.5 Tubular 58770X (front VS 2.5 remote reservoir CDXS coilovers), 57840XP (rear VS 2.5 remote reservoir CDXS shocks), 58461DJ (tubular upper control arms), 54202 (billet track bar), 51211 (triple rate rear coil springs) 840103433011
K53211D 1.25-3.25" 1 3.0 Billet 58561DJ (billet upper control arms), 57840XP (rear VS 2.5 remote reservoir CDXS shocks), 54102 (billet upper links), 54002 (billet lower links), 58775X (front VS 3.0 remote reservoir CDXS coilovers)
K53211TD 2-3.25" 1 3.0 Tubular 57840XP (rear VS 2.5 remote reservoir CDXS shocks), 58461DJ (tubular upper control arms), 58775X (front VS 3.0 remote reservoir CDXS coilovers)
K53212D 1.25-3.25" 2 3.0 Billet 58561DJ (billet upper control arms), 54102 (billet upper links), 54002 (billet lower links), 58775X (front VS 3.0 remote reservoir CDXS coilovers), 57845XP (rear VS 3.0 remote reservoir CDXS shocks)
K53212TD 2-3.25" 2 3.0 Tubular 58461DJ (tubular upper control arms), 58775X (front VS 3.0 remote reservoir CDXS coilovers), 57845XP (rear VS 3.0 remote reservoir CDXS shocks)
K53213D 1.25-3.25" 3 3.0 Billet 58561DJ (billet upper control arms), 54102 (billet upper links), 54002 (billet lower links), 54202 (billet track bar), 51210 (triple rate rear coil springs), 58775X (front VS 3.0 remote reservoir CDXS coilovers), 57845XP (rear VS 3.0 remote reservoir CDXS shocks) 840103433189
K53213DS 1.25-3.25" 3 TRD 3.0 Billet 58561DJ (billet upper control arms), 54102 (billet upper links), 54002 (billet lower links), 54202 (billet track bar), 51211 (triple rate rear coil springs), 58775X (front VS 3.0 remote reservoir CDXS coilovers), 57845XP (rear VS 3.0 remote reservoir CDXS shocks) 840103433196
K53213TD 2-3.25" 3 3.0 Tubular 58461DJ (tubular upper control arms), 54202 (billet track bar), 51210 (triple rate rear coil springs), 58775X (front VS 3.0 remote reservoir CDXS coilovers), 57845XP (rear VS 3.0 remote reservoir CDXS shocks) 840103433165
K53213TDS 2-3.25" 3 TRD 3.0 Tubular 58461DJ (tubular upper control arms), 54202 (billet track bar), 51211 (triple rate rear coil springs), 58775X (front VS 3.0 remote reservoir CDXS coilovers), 57845XP (rear VS 3.0 remote reservoir CDXS shocks) 840103433172

Warranty, shipping & returns

  • Warranty

    ICON shocks and coilovers in this system carry ICON's 1-year shock warranty against manufacturer's defects, and ICON's other suspension components carry its Limited Lifetime Warranty.
    • Coverage belongs to the original retail buyer who owns the vehicle the parts were first installed on.
    • A shock that fails in its first year goes to ICON for inspection and service. If ICON finds the cause was neglect, poor installation or anything other than normal wear and tear, the owner pays for labor, parts and shipping.
    • ICON parts must go on as the complete kit shown in ICON's application guide. Swapping out or leaving off a required part voids the warranty.
    • Upper control arms with ICON's Delta Joint carry 5 years of coverage from the purchase date, but only when ICON's warranty registration is completed within 30 days of purchase; contact us and we will help you register. The Delta Joint PRO carries 1 year. Neither is transferable to a later owner.
    • ICON repairs or replaces a defective part, at its discretion. Removal, reinstallation, freight and incidental or consequential costs are not covered, and parts that wear in normal use are not treated as defective.
    • Not covered: finish (including finish marks from shipping), alterations or modifications, installation that departs from ICON's instructions, racing use, police, taxi, government or commercial vehicles, and sales outside the United States and Canada.
    • To claim, contact us first with your order number and a short description of the problem. We open the claim with ICON for you, and your Prestige Truck receipt is the proof of purchase ICON asks for.
  • Free shipping

    Ships free to the lower 48 states, with no minimum order.
    • Order by 5 PM ET on a business day and it starts processing the same day.
    • Most orders arrive within 1-5 business days.
    • Larger systems can arrive in more than one carton, each with its own tracking.
    • We email your tracking number as soon as it ships.
  • Inspect on delivery

    A stage system arrives in several cartons: open every box when it lands, check each part and hardware bag against ICON's parts lists, and photograph any carton damage before you sign or start the install. Check it as soon as it arrives.
    • Look for crushed ends, punctures or tears in the carton.
    • If something looks wrong, take photos of the box and the parts (and if a driver asks you to sign, note the damage on the receipt).
    • Open the box and check the parts against the parts list before you install.
    • Email support@prestigetruck.com right away with your order number, a short note and photos. We send a replacement or a full refund at no cost to you.
  • 30-day returns

    Return it within 30 days of delivery, unused, in the original packaging, with proof of purchase.
    • Email support@prestigetruck.com with your order number. We reply within 1-2 business days with instructions.
    • Damaged, defective or wrong item: we send a prepaid label or arrange a pickup.
    • Changed your mind: you pay return shipping. No restocking fee.
    • Refunds go back to your original payment method within 7 business days of approval. See our returns policy.
Questions about fit or install?Chat with our team, Mon to Fri, 9am to 5pm EST.Ask a question