ICON Vehicle Dynamics Tubular Upper Control Arm Kit w/ Delta Joint for 2009-2026 Ram 1500/1500 Classic & Dodge 1500 (Front)
Free gifts included with your order
- Guaranteed FitmentTeam-confirmed fit or money back
- No Sales TaxZero sales tax on every order
- 30-Day Money-Back GuaranteeReturn it within 30 days of delivery for a refund
Questions or a custom quote?
Mon to Fri, 9am to 5pm EST
Complete your upgrade
Fits the same truck
Features
- Delta Joint High-Angle Ball Joint: ICON's patented Delta Joint pairs ball-joint toughness with uniball-like articulation. Newer kits use the larger, rebuildable Delta Joint PRO with up to 90 degrees of free articulation.
- More Travel With ICON Coilovers: The arms are designed to give ICON's extended travel coilovers room to work, adding droop and wheel travel over the factory arms.
- Caster Corrected for Lifted Trucks: ICON builds caster correction into its arms so a lifted truck can be aligned to better specs, for steadier steering and tracking.
- Choose Tubular or Billet Arms: Tubular arms are CNC-bent DOM steel with a powder coat. Billet arms are machined 6061 aluminum, anodized, with on-vehicle caster and camber adjustment.
- Sealed, Greasable Delta Joint: The Delta Joint has a zinc plated housing as a first layer of corrosion protection and a tough grease seal that keeps dirt out of the joint. Its metal-on-metal, greasable design adds service life and runs noise-free.
- Improved Suspension Component Clearance: ICON shapes its arms, including the H-beam billet designs, for better clearance around the coilover and other front suspension parts.
Description & Fitment
The ICON tubular upper control arm kit with Delta Joint is a front kit for the 2009-2010 Dodge 1500, 2011-2026 Ram 1500 and 2019-2024 Ram 1500 Classic with a 0-3" lift. The arms are CNC-bent 1026 DOM steel tube in semi-gloss black powder coat, with geometry that adds back the caster a lift takes away. Each arm carries ICON's sealed, greasable Delta Joint, built to articulate like a uniball while lasting like a ball joint. Paired with ICON's extended travel coilovers, the arms make room for more wheel travel, and an alignment is needed after install.
Fitment & Compatibility
| Years | Model | Bed | Notes |
|---|---|---|---|
| 2009-2010 | 1500 | — |
| Years | Model | Bed | Notes |
|---|---|---|---|
| 2011-2026 | 1500 | — | |
| 2019-2024 | 1500 Classic | 0-3" lift |
Check your fit: match your year, model and the notes in each row: 2009-2010 Dodge 1500; 2011-2026 Ram 1500; 2019-2024 Ram 1500 Classic (0-3" lift).
Not for: years, models or trims outside those rows. Other upper control arm kits in this line for the same models: 218560DJ (Billet Upper Control Arm Kit w/ Delta Joint, 2019-2026); 218561DJ (Billet Upper Control Arm Kit w/ Delta Joint PRO, front, 2021-2026).
About ICON Vehicle Dynamics
ICON Vehicle Dynamics designs and builds performance suspension for trucks and SUVs at its shop in Riverside, California. Engineering is led by Dylan Evans, its head engineer and a SCORE champion driver, and ICON tests its parts on the street, on the trail and under race conditions.
ICON's engineers begin with the result they want from a vehicle, then study the forces acting on it in motion, which is where the name Vehicle Dynamics comes from. Fabrication stays in ICON's own shop, from laser cutting and metal forming to CNC machining, welding and final assembly. ICON calls its suspension systems and shock absorbers the top choice for popular trucks and SUVs.
Authorized ICON Vehicle Dynamics dealer. Prestige Truck is an authorized ICON Vehicle Dynamics dealer, so every ICON part we sell is new and genuine. ICON's warranty is for the original retail buyer, on the vehicle the part was first installed on. Keep your Prestige Truck order receipt: we use it when we take a claim to ICON for you.
Frequently Asked Questions
Will this fit my 2009-2010 Dodge 1500?
It fits when your vehicle matches one of these rows: 2009-2010 Dodge 1500; 2011-2026 Ram 1500; 2019-2024 Ram 1500 Classic (0-3" lift). If you are unsure about your trim or drivetrain, send us your VIN and we will check it against ICON's application list before you order.
Is an alignment part of the install?
Yes. ICON's install sheet for 218550DJ calls for the vehicle to be aligned once the upper control arm kit is in. The sheet is linked in the Installation section below.
Delta Joint or Delta Joint PRO?
Both are ICON high-angle ball joints. The Delta Joint PRO is larger, fully rebuildable and allows up to 90 degrees of articulation. ICON fits the PRO to its newer kits, and each title names the joint.
Tubular or billet?
Tubular arms are DOM steel with a powder coat and built-in caster. Billet arms are machined aluminum and add on-vehicle caster and camber adjustment. Where ICON offers both, choose the build at checkout.
Will I need an alignment?
Yes. New upper control arms change the front-end geometry, and ICON calls for an alignment afterward.
What warranty applies?
ICON's upper control arms carry its Limited Lifetime Warranty. The Delta Joint has 5 years when registered within 30 days of purchase, and the Delta Joint PRO 1 year. Contact us to register or claim.
Installation
- Jack
- Jack Stands
- Torque Wrench
- Various Sockets / Wrenches
Here's the short version. Follow ICON's install sheet (below) for your vehicle's exact steps and torque values.
- Using a properly rated jack, raise the front of the vehicle and support the frame rails with jack stands. Ensure the jack stands are secure and set properly before lowering the jack. NEVER WORK UNDER AN UNSUPPORTED VEHICLE.
- Support the spindle so that it does not over extend the CV joints when detached.
- With the upper control arm disconnected from the spindle, loosen the upper control arm from its mounts in the frame. Remove OEM upper control arm.
- Each arm is clearly labeled which side it should be installed on.
- Pivot the Delta Joint stem so that it is inline with the taper bore in the spindle. The new Delta Joint will be very stiff the first time you move it.
- Have the vehicle professionally aligned.
Stuck on a step?
Specifications
| Brand | ICON Vehicle Dynamics |
|---|---|
| Part Number | 218550DJ |
| Product Type | Upper control arm kit |
| Position | Front |
| Lift | 0-3" |
| Finish | Semi-gloss black powder coat (tubular) |
| UPC | 840103401140 |
Warranty, shipping & returns
-
Warranty
ICON's upper control arms carry its Limited Lifetime Warranty, and the ball joint carries its own Delta Joint or Delta Joint PRO terms.- Coverage belongs to the original retail buyer who owns the vehicle the part was first installed on.
- ICON parts must go on as the complete kit shown in ICON's application guide. Swapping out or leaving off a required part voids the warranty.
- The Delta Joint carries 5 years of coverage from the purchase date, but only when ICON's warranty registration is completed within 30 days of purchase; contact us and we will help you register. The Delta Joint PRO carries 1 year from the purchase date. Neither is transferable to a later owner, and neither applies when the joint runs with a suspension system that is not ICON's.
- ICON repairs or replaces a defective part, at its discretion. Removal, reinstallation, freight and incidental or consequential costs are not covered, and parts that wear in normal use are not treated as defective.
- Not covered: finish (including finish marks from shipping), alterations or modifications, installation that departs from ICON's instructions, racing use, police, taxi, government or commercial vehicles, and sales outside the United States and Canada.
- To claim, contact us first with your order number and a short description of the problem. We open the claim with ICON for you, and your Prestige Truck receipt is the proof of purchase ICON asks for.
-
Free shipping
Ships free to the lower 48 states, with no minimum order.- Order by 5 PM ET on a business day and it starts processing the same day.
- Most orders arrive within 1-5 business days.
- We email your tracking number as soon as it ships.
-
Inspect on delivery
Check both arms, the Delta Joints, bushings, dust caps and hardware as soon as the carton arrives, and photograph any damage before installation. Check it as soon as it arrives.- Look for crushed ends, punctures or tears in the carton.
- If something looks wrong, take photos of the box and the parts (and if a driver asks you to sign, note the damage on the receipt).
- Open the box and check the parts against the parts list before you install.
- Email support@prestigetruck.com right away with your order number, a short note and photos. We send a replacement or a full refund at no cost to you.
-
30-day returns
Return it within 30 days of delivery, unused, in the original packaging, with proof of purchase.- Email support@prestigetruck.com with your order number. We reply within 1-2 business days with instructions.
- Damaged, defective or wrong item: we send a prepaid label or arrange a pickup.
- Changed your mind: you pay return shipping. No restocking fee.
- Refunds go back to your original payment method within 7 business days of approval. See our returns policy.