ICON Vehicle Dynamics Tubular Upper Control Arm Kit w/ Delta Joint PRO for 2022-2026 Toyota Sequoia/Tundra (Front)
Free gifts included with your order
- Guaranteed FitmentTeam-confirmed fit or money back
- No Sales TaxZero sales tax on every order
- 30-Day Money-Back GuaranteeReturn it within 30 days of delivery for a refund
Questions or a custom quote?
Mon to Fri, 9am to 5pm EST
Complete your upgrade
Fits the same truck
Features
- Delta Joint High-Angle Ball Joint: ICON's patented Delta Joint pairs ball-joint toughness with uniball-like articulation. Newer kits use the larger, rebuildable Delta Joint PRO with up to 90 degrees of free articulation.
- More Travel With ICON Coilovers: The arms are designed to give ICON's extended travel coilovers room to work, adding droop and wheel travel over the factory arms.
- Caster Corrected for Lifted Trucks: ICON builds caster correction into its arms so a lifted truck can be aligned to better specs, for steadier steering and tracking.
- Choose Tubular or Billet Arms: Tubular arms are CNC-bent DOM steel with a powder coat. Billet arms are machined 6061 aluminum, anodized, with on-vehicle caster and camber adjustment.
- Serviceable Dual Stage Bushings: Greaseable, rebuildable heavy duty dual stage bushings at the frame pivots sit in precision machined housings and keep the arms responsive and serviceable.
- Improved Suspension Component Clearance: ICON shapes its arms, including the H-beam billet designs, for better clearance around the coilover and other front suspension parts.
Description & Fitment
This ICON Vehicle Dynamics tubular upper control arm kit fits the front of the 2022-2026 Toyota Tundra and the Toyota Sequoia. The arms start as heavy-wall DOM tube, CNC formed and welded, then powder coated semi-gloss black, with caster correction built in for lifted trucks. ICON's Delta Joint PRO is larger than the standard joint, articulates up to 90 degrees and is fully rebuildable, with an anodized billet cap protecting its grease fitting. With ICON extended travel coilovers, the arms help unlock more droop and wheel travel, and a wheel alignment is required afterward.
Fitment & Compatibility
| Years | Model | Bed | Notes |
|---|---|---|---|
| 2023-2025 | Sequoia | — | |
| 2022-2026 | Tundra | — |
Check your fit: match your year, model and the notes in each row: 2023-2025 Toyota Sequoia; 2022-2026 Toyota Tundra.
Not for: years, models or trims outside those rows. Other upper control arm kits in this line for the same models: 58460DJ/58560DJ (Upper Control Arm Kit w/ Delta Joint, front, 2007-2022); 58561DJ (Billet Upper Control Arm Kit w/ Delta Joint PRO, 2022-2026).
About ICON Vehicle Dynamics
ICON Vehicle Dynamics designs and builds performance suspension for trucks and SUVs at its shop in Riverside, California. Engineering is led by Dylan Evans, its head engineer and a SCORE champion driver, and ICON tests its parts on the street, on the trail and under race conditions.
ICON's engineers begin with the result they want from a vehicle, then study the forces acting on it in motion, which is where the name Vehicle Dynamics comes from. Fabrication stays in ICON's own shop, from laser cutting and metal forming to CNC machining, welding and final assembly. ICON calls its suspension systems and shock absorbers the top choice for popular trucks and SUVs.
Authorized ICON Vehicle Dynamics dealer. Prestige Truck is an authorized ICON Vehicle Dynamics dealer, so every ICON part we sell is new and genuine. ICON's warranty is for the original retail buyer, on the vehicle the part was first installed on. Keep your Prestige Truck order receipt: we use it when we take a claim to ICON for you.
Frequently Asked Questions
Will this fit my 2023-2025 Toyota Sequoia?
It fits when your vehicle matches one of these rows: 2023-2025 Toyota Sequoia; 2022-2026 Toyota Tundra. If you are unsure about your trim or drivetrain, send us your VIN and we will check it against ICON's application list before you order.
Will I need an alignment afterward?
Yes. ICON's install sheet for 58461DJ calls for the vehicle to be aligned once the upper control arm kit is in. The sheet is linked in the Installation section below.
Delta Joint or Delta Joint PRO?
Both are ICON high-angle ball joints. The Delta Joint PRO is larger, fully rebuildable and allows up to 90 degrees of articulation. ICON fits the PRO to its newer kits, and each title names the joint.
Tubular or billet?
Tubular arms are DOM steel with a powder coat and built-in caster. Billet arms are machined aluminum and add on-vehicle caster and camber adjustment. Where ICON offers both, choose the build at checkout.
Will I need an alignment?
Yes. New upper control arms change the front-end geometry, and ICON calls for an alignment afterward.
What warranty applies?
ICON's upper control arms carry its Limited Lifetime Warranty. The Delta Joint has 5 years when registered within 30 days of purchase, and the Delta Joint PRO 1 year. Contact us to register or claim.
Installation
- Jack
- Jack Stands
- #2 Phillips Screwdriver
- Body Clip Removal Tool
- Small Flat Blade Screwdriver
- Needle Nose Pliers
- Torque Wrench
- 10mm Socket / Wrench
- Rest on ICON's sheet
Here's the short version. Follow ICON's install sheet (below) for your vehicle's exact steps and torque values.
- Lift vehicle and securely place heavy duty jack stands under the manufacturer recommended lifting locations for the front of the vehicle. Take care when lifting the vehicle and allow 3-4" of ground clearance from the tire.
- Remove the airbox. Loosen the hose clamp with a #2 phillips screwdriver or 10mm on the air intake hose located closest to the engine.
- Remove the harness clamp from the large wire loom using a small flat blade screwdriver.
- Remove three 10mm bolts from the ECU bracket. One on the front core support, two on the fender well.
- Install the new bushings into the ICON tubular UCA as indicated by the drawing below. Grease before install.
- Reinstall the ECU and airbox in reverse order of removal.
Stuck on a step?
Specifications
| Brand | ICON Vehicle Dynamics |
|---|---|
| Part Number | 58461DJ |
| Product Type | Upper control arm kit |
| Position | Front |
| Finish | Semi-gloss black powder coat (tubular) |
| UPC | 840103414638 |
Warranty, shipping & returns
-
Warranty
ICON's upper control arms carry its Limited Lifetime Warranty, and the ball joint carries its own Delta Joint or Delta Joint PRO terms.- Coverage belongs to the original retail buyer who owns the vehicle the part was first installed on.
- ICON parts must go on as the complete kit shown in ICON's application guide. Swapping out or leaving off a required part voids the warranty.
- The Delta Joint carries 5 years of coverage from the purchase date, but only when ICON's warranty registration is completed within 30 days of purchase; contact us and we will help you register. The Delta Joint PRO carries 1 year from the purchase date. Neither is transferable to a later owner, and neither applies when the joint runs with a suspension system that is not ICON's.
- ICON repairs or replaces a defective part, at its discretion. Removal, reinstallation, freight and incidental or consequential costs are not covered, and parts that wear in normal use are not treated as defective.
- Not covered: finish (including finish marks from shipping), alterations or modifications, installation that departs from ICON's instructions, racing use, police, taxi, government or commercial vehicles, and sales outside the United States and Canada.
- To claim, contact us first with your order number and a short description of the problem. We open the claim with ICON for you, and your Prestige Truck receipt is the proof of purchase ICON asks for.
-
Free shipping
Ships free to the lower 48 states, with no minimum order.- Order by 5 PM ET on a business day and it starts processing the same day.
- Most orders arrive within 1-5 business days.
- We email your tracking number as soon as it ships.
-
Inspect on delivery
Check both arms, the Delta Joints, bushings, dust caps and hardware as soon as the carton arrives, and photograph any damage before installation. Check it as soon as it arrives.- Look for crushed ends, punctures or tears in the carton.
- If something looks wrong, take photos of the box and the parts (and if a driver asks you to sign, note the damage on the receipt).
- Open the box and check the parts against the parts list before you install.
- Email support@prestigetruck.com right away with your order number, a short note and photos. We send a replacement or a full refund at no cost to you.
-
30-day returns
Return it within 30 days of delivery, unused, in the original packaging, with proof of purchase.- Email support@prestigetruck.com with your order number. We reply within 1-2 business days with instructions.
- Damaged, defective or wrong item: we send a prepaid label or arrange a pickup.
- Changed your mind: you pay return shipping. No restocking fee.
- Refunds go back to your original payment method within 7 business days of approval. See our returns policy.