RetraxPRO FRC-4000 EZ-OFF Retractable Tonneau Cover with T-Slot Rails for 2022-2026 Nissan Frontier (5' Bed)

The RetraxPRO FRC-4000 EZ-OFF is a manual retractable tonneau cover built from double-wall aluminum slats, with T-slot rails along the sides and lift handles that release the whole cover from the truck. Day to day it works like any retractable: pull the key-lockable TraxLatch handle and the slats glide on CoreTrax sealed rollers into a padded storage case, stopping wherever you let go. When a load needs the entire bed, the EZ-OFF handles take the cover off with a quick click and it stands on its own integrated feet in the garage. It is rated to support over 500 lb and finished in matte black. Part number R-T-80731 is the 5' bed application for the 2022-2026 Nissan Frontier.

What's Included:

• RetraxPRO FRC-4000 EZ-OFF cover with padded storage case
• Side rails with T-slot channels
• Four quick-attaching clamps
• Hardware kit
• Install guide

Features

Double-Wall Aluminum, Over 500 lb
The slat surface is double-wall aluminum, which the manufacturer says adds strength and security. The cover itself is rated to support over 500 lb. Theft resistance is credited to the TraxLatch handle, which takes a key.

Slides Smooth, Stops Anywhere
Pull the key-lockable TraxLatch handle and the cover rides on CoreTrax sealed rollers, so opening and closing takes little effort. Let go at any point along the bed and it holds there. You can also cinch gear between the cover edge and the tailgate.

Lifts Off With a Click
This is what sets the FRC-4000 apart. Integrated EZ-OFF lift handles release the cover from the truck with a patented quick click, so when a load is too tall or too long you take the whole cover off rather than working around it.

Full Bed, 21 Percent More
With the cover off, the whole bed is open, which the manufacturer counts as 21 percent more room than a traditional retractable. The case the slats roll into is padded and the track guiding them is spiral, which is meant to keep cargo unscratched.

T-Slot Channels in the Rails
The manufacturer lists this cover as the T-slot rails version, so the side rails carry T-slot channels rather than a plain profile. Rack fitment is answered in the questions below, and it is worth settling before you buy any hardware.

Four Clamps, Under an Hour
The manufacturer rates the install Level 1 for difficulty and puts it under 60 minutes with minimal tools. The rails sit on the factory bed rails and are held by four quick-attaching clamps, with no drilling. Truck-specific sheets cover RamBox, CarbonPro and deck rail beds.

Fitment & Compatibility

Specifications

• Cover Type: Manual retractable tonneau cover, removable
• Material: Double-wall aluminum slats
• Finish: Matte black
• Bed Access: 100 percent, cover lifts off with EZ-OFF handles
• Load Capacity: Rated for over 500 lb
• Security: Key-lockable TraxLatch handle, double-wall aluminum surface
• Operation: CoreTrax sealed rollers, holds open at any position
• Removal: Quick-click EZ-OFF lift handles, patented
• Storage: Stands on integrated feet in a garage, truck bed or back seat
• Drilling Required: No, four quick-attaching clamps
• Rack Compatible: T-slot rails, see manufacturer T-slot compatibility guide
• Weight: About 110 lb
• Made in: USA

Installation

Type: Clamp-on, no drilling · Time: Under 60 minutes · Difficulty: Level 1, simple · Tools: Included hardware kit; Minimal hand tools

The mounting method is the same on every fitment: set the rails on the factory bed rails, tighten the four quick-attaching clamps with the included hardware and drop the storage case in place. Nothing is drilled. Each truck and bed system has its own install sheet, RamBox, CarbonPro and deck rail beds included. Run the cover open and closed and recheck every clamp after a week of driving.

Watch the installation walkthrough:

Resources

Everything you need for your RetraxPRO FRC-4000 EZ-OFF Retractable Tonneau Cover with T-Slot Rails for 2022-2026 Nissan Frontier (5' Bed), in one place.

• Official RetraxPRO FRC-4000 EZ-OFF Retractable Tonneau Cover with T-Slot Rails for 2022-2026 Nissan Frontier (5' Bed) installation guide (PDF), the manufacturer's step-by-step guide covering mounting, included hardware and adjustment.

Warranty, Shipping & Returns

Warranty. Retrax backs the FRC-4000 with a limited lifetime warranty against defects in materials and workmanship for the original owner, and it does not transfer with the truck. Exclusions are accident damage, neglect, improper installation or servicing and any use the cover was not designed for. Lubricating the rails or sealed bearings, cleaning with anything stronger than mild automotive soap, driving with unsecured cargo, opening it with snow or ice on the slats or towing the truck from the rear with the cover fitted all void it. Approved claims are repaired or replaced at the manufacturer's option after a return authorization is issued, with shipping charges payable by the owner.

Free shipping. This item ships free to the lower 48 states. Because it is an oversized item, it ships by freight or oversized parcel and typically arrives in 3 to 7 business days.

Inspect on delivery. Please inspect the packaging before signing. If you see any damage, note it on the delivery receipt and contact us right away, and we will make it right.

Returns. Unused items in their original packaging can be returned within 30 days of delivery. If an item arrives damaged, defective or wrong, return shipping is on us. See our Returns & Refunds Policy, or email support@prestigetruck.com with any question.

About Retrax

Retrax builds retractable hard covers for pickup beds. The FRC-4000 EZ-OFF is the manual, removable cover in that range. Its published specifications are short: an aluminum build, a matte black finish, made in America, with a limited lifetime warranty held by the original owner.

The manual line runs the RetraxONE MX and XR, the RetraxPRO MX and XR, the Retrax IX and this FRC-4000 EZ-OFF. Each one is a retractable, so the slats travel into a storage case when the bed is opened. The XR covers carry T-slot rails.

Support material is truck specific. There are separate install sheets for the F-150, Super Duty, Silverado and Sierra, Sierra HD, Tundra, Tacoma, Frontier, Titan, Ridgeline and Ranger, plus versions for factory bed systems such as the RamBox, the CarbonPro bed and the Toyota deck rail system. Install videos cover a Tacoma and an F-150.