RetraxPRO XR Retractable Tonneau Cover with T-Slot Rails for 2009-2014 Ford F-150 (5'7" Bed)

The RetraxPRO XR is a manual retractable tonneau cover built from double-wall aluminum slats, with T-slot rails running the length of the bed so a rack, cross bars, a tent or cargo carriers can ride on top. Pull the key-lockable TraxLatch handle and the cover slides on CoreTrax sealed rollers into its storage case, stopping wherever you release it. Closed, it carries up to 500 lb of evenly distributed weight, seals against the bed rails and sends water out through drain tubes. It opens with the tailgate up or down, clamps on without drilling and wears a matte black powder coat. It suits owners who want a low hard cover that also carries gear. Part number T-80371 is the 5'7" bed application for the 2009-2014 Ford F-150.

What's Included:

• Retractable slat cover in its canister
• Front cover panel
• Driver side and passenger side rails with T-slot channels
• Four clamps, six on the longest beds
• Canister screws and front cover screws
• Two drain tubes and two Allen wrenches

Features

Stops Wherever You Let Go
The TraxLatch handle releases the cover and holds it at any point along the bed, so you can uncover only what you need. CoreTrax sealed rollers move the slats without lubrication and are designed not to freeze or bind, tested from -40°F to 180°F.

Drains Water Off the Bed
A water management system seals the cover against the bed rails, and any water that does collect is carried out through integrated drain tubes rather than dripping onto your cargo. The manufacturer tested it from zero to 95 percent humidity.

Double-Wall Aluminum Slats
Each slat is double-wall aluminum, which gives the closed cover a 500 lb evenly distributed rating and adds strength and security. Theft resistance comes from the key-lockable TraxLatch handle. The matte black powder coat resists scratches and UV exposure.

Tailgate Up or Down
You do not need to drop the tailgate to reach your gear. The cover opens and closes with the tailgate shut, and the two work in either order. You can also cinch gear between the cover edge and the tailgate to hold it in place.

T-Slot Rails Built In
T-slot channels run the full length of the side rails, so cross bars, a bed rack, a tent or cargo holders attach directly to the cover. The rails add hauling capacity without giving up bed access.

Four Clamps, No Drilling
Rated Level 1 by the manufacturer, the install takes under an hour. The side rails clamp to the bed using the included hardware and four quick-attach clamps, with nothing to drill. Everything arrives in one box, assembled in Grand Forks, North Dakota.

Fitment & Compatibility

Specifications

• Cover Type: Manual retractable tonneau cover
• Material: Double-wall aluminum slats
• Finish: Matte black powder coat
• Bed Access: Retracts into the storage case on CoreTrax sealed rollers, holds at any position
• Load Capacity: 500 lb, evenly distributed
• Sealing: Seals against the bed rails, integrated drain tubes
• Security: Key-lockable TraxLatch handle, double-wall aluminum slats
• Drilling Required: No, four quick-attach clamps
• Install Time: Under 60 minutes
• Rack Compatible: Yes, integrated full-length T-slot rails
• Fits: 2009-2014 Ford F-150, 5'7" bed
• Weight: About 105 lb
• Made In: Assembled in the USA, Grand Forks, North Dakota
• Warranty: Limited lifetime

Installation

Type: Clamp-on, no drilling · Time: Under 60 minutes · Tools: Included hardware, minimal tools · Difficulty: Level 1, simple DIY

Installation is clamp-on. Four quick-attach clamps and the included hardware secure the cover to the bed, and nothing is drilled. The slats retract into the storage case once the rails are set. The manufacturer rates the job Level 1, under one hour, with minimal tools. Some trucks have a separate instruction sheet, including Tacoma, Ranger, CarbonPro and Tundra beds with tracks.

Watch the installation walkthrough:

Resources

Everything you need for your RetraxPRO XR Retractable Tonneau Cover with T-Slot Rails for 2009-2014 Ford F-150 (5'7" Bed), in one place.

• Official RetraxPRO XR Retractable Tonneau Cover with T-Slot Rails for 2009-2014 Ford F-150 (5'7" Bed) installation guide (PDF), the manufacturer's step-by-step guide covering mounting, included hardware and adjustment.

Warranty, Shipping & Returns

Warranty. Retrax covers the RetraxPRO XR with a limited lifetime warranty against defects in materials and workmanship from the date of purchase; it goes to the original purchaser and does not transfer if the truck is sold. An accident, neglect, unforeseeable use, improper installation or improper servicing voids the warranty. Lubricating the rails or sealed ball bearings, cleaning with anything stronger than mild automotive soap, driving with unsecured cargo or towing the truck from the rear with the cover fitted will also void it. Defective parts are repaired or replaced at the manufacturer's option once a return authorization number is issued, and shipping charges apply.

Free shipping. This item ships free to the lower 48 states. Because it is an oversized item, it ships by freight or oversized parcel and typically arrives in 3 to 7 business days.

Inspect on delivery. Please inspect the packaging before signing. If you see any damage, note it on the delivery receipt and contact us right away, and we will make it right.

About Retrax

Retrax builds retractable covers for pickup beds. The RetraxPRO XR is assembled in the USA in Grand Forks, North Dakota. The manufacturer also lists it as made in America. Warranty claims run through the manufacturer's own US-based customer service team, which issues the return authorization number before anything ships back.

The lineup splits into tiers. RetraxONE covers carry a one year limited warranty, while RetraxPRO covers like this XR carry a limited lifetime warranty. The model name also signals the rails: XR versions arrive with T-slot rails for mounting racks and MX versions do not. The Retrax IX and the RetraxPRO EZ-OFF are also part of the lineup.

The RetraxPRO XR is a low-profile retractable cover. Open it and the slats roll into a reinforced storage case with fortified ends. Its CoreTrax sealed rollers are described as maintenance-free, and lubricating them voids the warranty. The manufacturer tested the RetraxPRO XR from -40°F to 180°F and up to 95 percent humidity.