TeraFlex Coil Spring Base Lift Kit, No Quick Disconnects or Shocks for 1997-2006 Jeep Wrangler TJ & Wrangler Unlimited LJ

$786.99
FREE SHIPPINGNo sales tax Only 1 leftIn stock now  Estimated delivery
Verify fitment with your vehicle
GO
Clear

Lift Height
Flash Sale Ends in--:--:--

Free gifts included with your order

Details for ACCESS TrailSeal Tailgate Seal Gasket, 8.5 ft (30946) (opens in a new tab)
Details for ACCESS EZ-Retriever II Truck Bed Cargo Reach Tool, 5 ft (70950) (opens in a new tab)
Prestige Truck customer support

Questions or a custom quote?

Mon to Fri, 9am to 5pm EST

Features

  • 3" or 4" of lift: Base coil spring lift for the TJ and LJ.
  • No disconnects or shocks: A lower-cost base kit; add shocks and disconnects to suit your build.
  • Shock recommendations: TeraFlex recommends its 9550 VSS Twin-Tube kit (1545270) or Falcon Series 3.0 shocks.
  • Geometry correction needed: Requires adjustable control arms and/or an adjustable front track bar.
  • Driveline for 4": CV-style driveshaft and slip yoke eliminator required at 4", recommended at 3".
  • Not for Rubicon: TeraFlex lists TJ/LJ Rubicon models as not compatible.

Description & Fitment

This TeraFlex Coil Spring Base Lift Kit lifts a 1997-2006 Jeep Wrangler TJ or Wrangler Unlimited LJ 3" (1141300) or 4" (1141400), and it is not for Rubicon models. As a base kit it includes only the basic lift parts and leaves out the quick disconnects and shocks, so you can add the shocks and disconnects that suit your build. It needs adjustable control arms and/or an adjustable front track bar to correct suspension geometry, plus longer shocks, caster correction and an alignment. A 4" lift also needs a CV-style driveshaft and a slip yoke eliminator, which is highly recommended at 3" too.

Fitment & Compatibility

Jeep
Years Model Bed Notes
1997-2006 Wrangler TJ/LJ; 3"-4" lift; Not for Rubicon models

Check your Jeep: 1997-2006 Jeep Wrangler TJ or Wrangler Unlimited LJ, non-Rubicon; wheels with 4.5" or less backspacing or 1005200 adapters.

Not for: Rubicon models. With quick disconnects or shocks: see 1141350/1141450 and 1241350/1241450.

Not for: TJ/LJ Rubicon

About TeraFlex

TERAFLEX.

TeraFlex describes itself as a Jeep company at heart, started and staffed by people who drive them. It designs, engineers and builds suspension systems, shocks, axles and performance parts, with the Wrangler and Gladiator at the center of the range.

The company traces its roots to the 1950s and MEPCO (Military Equipment Parts Company), an early supplier of Jeep parts. TeraFlex Manufacturing followed in 1996 to build heavy-duty suspension for the TJ Wrangler, and today's catalog runs from full lift systems and the Falcon shock line to axles, steering and armor.

Authorized TeraFlex dealer. Prestige Truck is an authorized TeraFlex dealer, so what we sell is new and genuine TeraFlex. In TeraFlex's words, its limited warranty extends "only to the consumer who originally purchased the product," so keep your receipt with your build records.

Frequently Asked Questions

Will it fit my Rubicon?

No. TeraFlex lists this kit as not compatible with TJ/LJ Rubicon models.

What do I need with the 4" kit?

A CV-style driveshaft and slip yoke eliminator kit (4444400 or 4444401), caster correction and an alignment. TeraFlex also suggests its Pro LCG High Steer System (1849000) for 4"+ lifts.

Can I run my stock wheels?

Only with Offset Wheel Adapters (1005200); otherwise use aftermarket wheels with 4.5" or less backspacing.

What warranty does TeraFlex give?

TeraFlex covers its coil springs and 9550 VSS shocks for life against defects in materials and workmanship, and paint and powder coat finishes for 90 days. Contact us to confirm coverage on other parts of your kit or to start a claim.

How quickly does it ship?

Shipping is free to the lower 48 states, and most orders arrive within 1-5 business days. We email your tracking number as soon as it ships.

Can you confirm it's the right kit before I order?

Yes. Contact us with your VIN or year, model, doors and trim, plus your wheels, tires and any lift parts already fitted, and we'll check it against TeraFlex's fitment information before it ships.

Installation

Install time 5 hours
What's involvedRemove the track bars, sway bar links, shocks and springs, fit the bump stop extensions, new springs, links and rear track bar bracket, and drill a new 13/32" hole to relocate the front track bar. FlexArm kits also swap the lower control arms.

Here's the short version. Follow TeraFlex's install sheet (below) for your Jeep's exact steps and torque values.

  1. Front: disconnect the front track bar at the axle (T50 Torx or 17mm, p10), the sway bar links and the shocks, then remove the front springs.
  2. On kits with lower FlexArms (1456330), remove the front lower control arms and install the FlexArms; then fit the front bump stop extensions, the new front springs and new or existing shocks.
  3. With the steering centered, bounce the Jeep, raise the track bar end into its axle bracket and drill a new 13/32" hole where it lines up; fit the new 10mm x 75mm bolt at 40 ft-lbs.
  4. Fit the new quick disconnect links, or reconnect the factory front sway bar links on kits without them (1141300, p9).
  5. Rear: remove the track bar, sway bar links, shocks and springs (and swap the lower arms on FlexArm kits), then install the rear bump stop extensions, new springs, new or existing shocks, the rear track bar bracket and the new rear sway bar links.
  6. Install the transfer case drop kit where the kit list includes it.

Stuck on a step? Ask our install experts

Specifications

Specifications
BrandTeraFlex
Product TypeCoil spring base lift kit
IncludesBasic lift components; no quick disconnects or shocks
Wheel Requirement4.5" or less backspacing, or Offset Wheel Adapters 1005200 (not included)
Also RequiredLonger shocks, caster correction, alignment
Part number1141300
UPC843885019626
Versions
Part # Lift Height UPC
1141300 3" 843885019626
1141400 4" 843885019633

Warranty, shipping & returns

  • Warranty

    TeraFlex covers its coil springs and its 9550 VSS shocks for life against defects in materials and workmanship, and paint and powder coat finishes for 90 days (defects only). TeraFlex's warranty list names no separate term for the coil spring spacers in the Gladiator 2.5" kit, so contact us if you need that term before ordering.
    • TeraFlex extends its limited warranty only to the consumer who first bought the product, and only on the vehicle the part was first installed on. It does not pass to a later owner.
    • Coverage starts on the purchase date and does not restart if a part is repaired or replaced.
    • For a covered defect, TeraFlex will either repair or replace the product (or the faulty part) free of charge or refund the purchase price, at its discretion, and it pays the freight to send a repaired or replacement part back to you.
    • Not covered: damage from transportation, storage, improper use, skipped instructions or preventive maintenance, modifications, unauthorized repair, normal wear and tear, product finish, improper installation or maintenance, racing or competition, or accidents, abuse and neglect. Improper installation, poor maintenance, racing or competition use, and neglect or abuse void the warranty.
    • Paint and powder coat finishes carry 90 days of defect coverage only, not wear from use.
    • Claims: contact us first. Keep your proof of purchase or original invoice; removing the part from the vehicle and the inbound shipping are the owner's responsibility.
  • Free shipping

    Ships free to the lower 48 states, with no minimum order.
    • Order by 5 PM ET on a business day and it starts processing the same day.
    • Most orders arrive within 1-5 business days.
    • We email your tracking number as soon as it ships.
  • Inspect on delivery

    Check that every spring, spacer and shock matches the part list in the TeraFlex instructions, and that springs are marked for the right axle, before you start. Contact us right away about anything missing or damaged. Check it as soon as it arrives.
    • Look for crushed ends, punctures or tears in the carton.
    • If something looks wrong, take photos of the box and the parts (and if a driver asks you to sign, note the damage on the receipt).
    • Open the box and check the parts against the parts list before you install.
    • Email support@prestigetruck.com right away with your order number, a short note and photos. We send a replacement or a full refund at no cost to you.
  • 30-day returns

    Return it within 30 days of delivery, unused, in the original packaging, with proof of purchase.
    • Email support@prestigetruck.com with your order number. We reply within 1-2 business days with instructions.
    • Damaged, defective or wrong item: we send a prepaid label or arrange a pickup.
    • Changed your mind: you pay return shipping. No restocking fee.
    • Refunds go back to your original payment method within 7 business days of approval. See our returns policy.
Questions about fit or install?Chat with our team, Mon to Fri, 9am to 5pm EST.Ask a question