Get cab protection without giving up the view out your back glass with the Weather Guard 11908-52-01 half bar aluminum headache rack. The half bar design runs horizontal bars across the outer sides of the frame while leaving the center open, so it guards the cab and marks the load line yet keeps a clear window for backing up and keeping an eye on cargo. It is built from corrosion-resistant aluminum with a matte black ARMOR TUF powder coat, mounts on the bed rails just behind the cab, and adjusts for height to clear the cab on full-size pickups. Mounting brackets and hardware are included, and the built-in accessory channel accepts Weather Guard light brackets, cargo stops and tie-downs.
What's Included:
11908 half bar aluminum headache rack and frame
Two height-adjustable mounting legs
Bed-rail mounting brackets and installation hardware
Weather Guard assembly and installation instructions
Features
Half Bar Design, Window Access Kept Clear Horizontal bars fill the outer sides of the frame while the center stays open, so you keep cab protection but hold onto a clear view through the rear window. It is the pick when you want to guard the cab yet still see your load and back up easily, sitting between the wide-open Open Frame and the fuller Louvered and Hex panels.
Matte Black ARMOR TUF Finish A matte black ARMOR TUF powder coat is baked over the aluminum to resist chips, fading and corrosion. The low-gloss black hides dust and fingerprints and gives a clean, blacked-out look behind the cab.
Corrosion-Resistant Aluminum The bars, frame and legs are formed from corrosion-resistant aluminum that shrugs off road salt, rain and jobsite weather without rusting like steel, while staying light enough to spare your payload.
Clearance For Ladders And Long Material The half bar leaves room over the cab to run ladders, lumber, pipe and conduit, so long loads clear the rack. You protect the cab and still haul the long stuff a trade truck carries every day.
Accessory Channel And Height Adjustment A built-in accessory channel accepts Weather Guard light brackets, a cargo stop and tie-down accessories, all sold separately, so you can add work lights or strap points over the cab. Adjustable legs set the height to clear the back of the cab on different full-size trucks.
Brackets Included, Limited Lifetime Warranty This aluminum rack ships with its bed-rail mounting brackets and hardware, so there is no separate vehicle-specific kit to buy like the older steel Protect-A-Rail cab protectors need. It is backed by a Weather Guard Limited Lifetime Warranty.
Fit guidance: This is a universal aluminum headache rack for full-size pickups, not a bolt-on for one model. The mounting brackets and hardware are included, so no separate vehicle-specific kit is required. It mounts on the bed rails just behind the cab and the legs adjust for height to clear your cab. Confirm your make and model on the Weather Guard fitment guide and measure clearance behind the cab before ordering. It is not designed for mid-size or compact trucks.
Specifications
Design: Half bar, horizontal bars on the outer sides, open center
Cab Coverage: Partial, keeps a clear open center for rear window access
Height Adjustment: Yes, adjustable legs for cab clearance
Mounting: Bed-rail mount behind the cab, brackets and hardware included, no separate kit needed
Assembled Size: About 66" across x 25.5" tall x 3.6" deep
Product Weight: About 32.5 lb
Shipping Weight: 38.5 lb (carton 67.7 x 27.5 x 6.1")
Fitment: Full-size pickups, universal design
Origin: Imported
Warranty: Limited Lifetime
Product Dimensions: 66"W x 3-5/8"D x 25-1/2"H
Weight: About 32-1/2 lb (38-1/2 lb shipping)
Mounting Location: Bed rails, no separate mounting kit required
Made In: Mexico
Installation
Type: Bed-rail mount behind the cab, included brackets and hardware · Time: About 30 to 45 minutes · Tools: Socket or wrench set and a tape measure; the mounting brackets and hardware are included · Difficulty: Easy to moderate, best done with two people to hold the frame while you bolt it down
Assemble the legs to the frame, set the rack on the bed rails just behind the cab, and secure it with the included brackets and hardware. Adjust the leg height so the frame clears the back of the cab and the open center lines up with the rear window, then tighten the hardware evenly. A second person makes it easier to hold the frame in place while you fasten the brackets. Follow the Weather Guard instructions for bracket placement and re-check the fasteners after the first drive.
Watch the installation walkthrough:
Warranty, Shipping & Returns
Warranty. Limited Lifetime Warranty from Weather Guard against defects in materials and workmanship.
Free shipping. This item ships free to the lower 48 states. Because it is an oversized item, it ships by freight and typically arrives in 3 to 7 business days.
Inspect on delivery. Please inspect the packaging before signing. If you see any damage, note it on the delivery receipt and contact us right away, and we will make it right.
About Weather Guard
Weather Guard has built professional-grade truck and van storage in the USA for decades and is the storage brand tradespeople, contractors, and fleets reach for first. Its steel and aluminum tool boxes, ladder racks, and van-interior systems are engineered to survive daily jobsite abuse and keep expensive tools secure and organized.
Known for weather-tight seals, patented locking systems, and heavy-gauge construction, Weather Guard products mount cleanly on work trucks and vans and stand up to years of hard use. The lineup spans crossover, low-side, and saddle truck boxes, ladder and van racks, drawer units, and fuel and utility tanks, so an entire work vehicle can be outfitted from one brand.
Backed by a strong manufacturer warranty and US-based support, Weather Guard is the name pros trust to protect the tools their livelihood depends on.
Authorized Weather Guard dealer. Prestige Truck is an authorized dealer of Weather Guard, so every tool box, rack and storage product you buy is 100% genuine and factory-new, covered by the full Weather Guard manufacturer warranty, and backed by our own US-based support team.
Weather Guard Defender Series Truck Rack Install
Weather Guard's Defender Series install video shows the lightweight aluminum truck rack going onto a pickup with no drilling required. You see the compression clamps grip the bed rails and the crossbars set up to carry ladders, lumber and pipe, rated to about 800 pounds. It makes clear how quickly the rack mounts and how the ladder stops keep a load in place. It is a helpful look at the rack in place before you buy or install your own.
Weather Guard Steel Truck Rack Install
This official Weather Guard guide shows how to install a steel truck rack for hauling ladders, lumber and long loads over the bed. You watch the rack mount to the bed and get tightened down, with the load bars set for ladders and pipe. It gives a clear picture of how the rack goes on and how much it adds to a truck's hauling capability. It is the manufacturer's own reference for setting up the rack correctly.
Best Upgrade for Your Truck
This is Weather Guard's own brand film about outfitting a working pickup, built on the idea that the truck should already be loaded and organized before the day starts. It puts the bed and rail equipment in the context of a real work day rather than a spec sheet.
Watch it if you are still deciding how much storage a truck actually needs. It is the clearest short look at how Weather Guard boxes, racks and drawer units are meant to work together on one vehicle, and it comes straight from the manufacturer rather than a reseller.
Frequently Asked Questions
Straight answers on specs, fit and support
Will the 11908 fit my truck?
It is a universal aluminum headache rack for full-size pickups such as the F-150, Silverado and Sierra 1500 through 3500, Ram 1500 through 3500, Tundra and Titan. The mounting brackets and hardware are included, so you do not need a separate kit. Confirm your make and model on the Weather Guard fitment guide and measure clearance behind the cab first. It is not made for mid-size or compact trucks.
What makes the half bar different from the other racks?
The half bar fills the outer sides of the frame with horizontal bars and leaves the center open, so you get cab protection while keeping a clear view through the rear window. It gives more coverage than the Open Frame rack but a better rear sight line than the full Louvered or Hex panels, which is handy for backing up and watching your load.
Does it come with the mounting hardware or do I need a separate kit?
It comes with everything to mount it. This aluminum rack includes its bed-rail brackets and hardware, unlike the older steel Protect-A-Rail cab protectors that require a separate vehicle-specific installation kit. Most installs run about 30 to 45 minutes with basic hand tools.
Can I add work lights to it?
Yes. The rack has a built-in accessory channel that accepts Weather Guard light brackets, a cargo stop and tie-down accessories, all sold separately, so you can add work lights or a beacon over the cab without drilling into the rack.
What color and finish is it?
The 11908 is finished in matte black ARMOR TUF powder coat over corrosion-resistant aluminum. The low-gloss black resists chips, fading and corrosion, hides dust and fingerprints, and gives a clean blacked-out look behind the cab.
Is it covered by a warranty?
Yes. The 11908-52-01 is backed by a Weather Guard Limited Lifetime Warranty against defects in materials and workmanship.
Mark K.
Look is great. 100 lbs
Look is great. 100 lbs lighter than my 2nd pick. Lid lock and opening are smooth. Only minor knock I give is the the tie down hooks are hard to install - thinking I should have done them before installing.
DECKED Tool Box, Full-Size Truck Crossbed, 71.7" x 25.5" x 16", 300 lb Lid / 800 lb Tub, Black (DTB2-BLK)
Mark
A must have
I really like this mat. I was apprehensive at first but, the mat does a great job of keeping things from sliding around without having to secure it. perfect fit. But i think i will be adding some short screws to secure the mat to the DECKED system.
DECKED Battle Mat, Full-Size Long Drawer System 6'4" to 6'9" Bed, Recycled Nyracord Rubber, Black (A0075-BMXL-BLK)
Roy L.
I never knew how much I needed this
As with all BAK covers, the quality is amazing. What I didnt fully appreciate until installing was the ease of opening - especially in a lifted truck. No more need to find the right handhold. Just roll it back with a single hand. Its also great to see out of my rear window when fully open - something you lose with the fold back covers. Customer service is awesome. I has an installation question and the representative stayed on the line as I adjusted an alignment to ensure I did it properly.
BAK Revolver X4s Hard Roll-Up Tonneau Cover for 2022-2026 Toyota Tundra (6'7" Bed)
Jeffrey P.
Better then expected.
Searched for about 6 months to find the tonneau cover. I really wanted the security of a hard top without sticking above the bed rails it checked those boxes. I also did not want to drill my truck bed. The install was super simple my wife and I had it on the truck in about a half an hour.
BAKFlip MX4 Hard Folding Tonneau Cover for 2003-2025 Ram 1500 / 2500 / 3500 (8' Bed)
Joseph A.
The toolbox is nice. I
The toolbox is nice. I think Ill get a lot of years of service out of it. I like how the lid opens and the tie downs are a nice touch. It seems to be well built. And tough. Im pleased with my purchase and would buy another one.
DECKED Tool Box, Full-Size Truck Crossbed, 71.7" x 25.5" x 16", 300 lb Lid / 800 lb Tub, Fender Dirt (DTB2-TAN)
