Put the most cab protection in the lineup behind your back glass with the Weather Guard 11906-52-01 hex aluminum headache rack. Its full honeycomb hex mesh panel fills the frame, so it shields the rear window from shifting cargo, ladders, pipe and flying debris better than the Open Frame, Louvered or Half Bar racks. It is built from corrosion-resistant aluminum with a matte black ARMOR TUF powder coat, mounts on the bed rails just behind the cab, and adjusts for height to clear the cab on full-size pickups. Mounting brackets and hardware are included, and the integrated accessory channel is ready for Weather Guard light brackets, cargo stops and tie-downs so you can build it into a full work setup.
What's Included:
11906 hex mesh aluminum headache rack panel and frame
Two height-adjustable mounting legs
Bed-rail mounting brackets and installation hardware
Weather Guard assembly and installation instructions
Features
Full Hex Mesh, Most Cab Protection A dense honeycomb hex mesh panel fills the frame to give the most cab protection of the four Weather Guard aluminum racks. It stops shifting loads, ladders and debris from reaching your rear window, with only a small window cutout for a sight line, so it is the pick when protection matters more than a clear view.
Corrosion-Resistant Aluminum The mesh, frame and legs are formed from aluminum that resists road salt, rain and jobsite weather without rusting like steel. Aluminum also keeps the rack lighter than a comparable steel guard so it protects the cab without eating up payload.
Matte Black ARMOR TUF Finish A matte black ARMOR TUF powder coat is baked over the aluminum to fight chips, fading and corrosion through years of hard work. The blacked-out mesh looks sharp behind the cab and matches a Weather Guard box.
Height Adjustable For Cab Clearance Adjustable legs let you raise or lower the panel to clear the back of the cab and sit right behind the window on different full-size pickups. That range of adjustment is what makes one rack fit many trucks.
Built-In Accessory Channel An integrated channel accepts Weather Guard add-ons such as light brackets, a cargo stop and tie-down accessories, all sold separately. Mount work lights or a beacon over the cab and add strap points for long loads without drilling the rack.
Brackets Included, Limited Lifetime Warranty This aluminum rack ships with its bed-rail mounting brackets and hardware, so there is no separate vehicle-specific kit to buy like the older steel Protect-A-Rail cab protectors need. It is backed by a Weather Guard Limited Lifetime Warranty.
Fit guidance: This is a universal aluminum headache rack for full-size pickups, not a bolt-on for one model. The mounting brackets and hardware are included, so no separate vehicle-specific kit is required. It mounts on the bed rails just behind the cab and the legs adjust for height to clear your cab. Because the hex mesh panel is tall, check clearance behind the cab and confirm your make and model against the Weather Guard fitment guide before ordering. It is not designed for mid-size or compact trucks.
Specifications
Design: Full honeycomb hex mesh panel with a small window cutout
Cab Coverage: Highest of the lineup, hex mesh screens the full rear window
Height Adjustment: Yes, adjustable legs for cab clearance
Mounting: Bed-rail mount behind the cab, brackets and hardware included, no separate kit needed
Assembled Size: About 66" across x 25.5" tall x 3.6" deep
Product Weight: About 38 lb
Shipping Weight: 43 lb (carton 72.8 x 27.5 x 6.1")
Fitment: Full-size pickups, universal design
Origin: Imported
Warranty: Limited Lifetime
Product Dimensions: 66"W x 3-5/8"D x 25-1/2"H
Weight: About 38 lb (43 lb shipping)
Mounting Location: Bed rails, no separate mounting kit required
Made In: Mexico
Installation
Type: Bed-rail mount behind the cab, included brackets and hardware · Time: About 30 to 45 minutes · Tools: Socket or wrench set and a tape measure; the mounting brackets and hardware are included · Difficulty: Easy to moderate, best done with two people because the mesh panel is heavier and bulkier
Assemble the legs to the panel, set the rack on the bed rails just behind the cab, and secure it with the included brackets and hardware. Adjust the leg height so the mesh clears the back of the cab and sits square behind the window, then tighten the hardware evenly. The full hex panel makes this rack heavier than the open designs, so use a second person to hold it while you bolt it down. Follow the Weather Guard instructions for bracket placement and re-check the fasteners after the first drive.
Watch the installation walkthrough:
Warranty, Shipping & Returns
Warranty. Limited Lifetime Warranty from Weather Guard against defects in materials and workmanship.
Free shipping. This item ships free to the lower 48 states. Because it is an oversized item, it ships by freight and typically arrives in 3 to 7 business days.
Inspect on delivery. Please inspect the packaging before signing. If you see any damage, note it on the delivery receipt and contact us right away, and we will make it right.
About Weather Guard
Weather Guard has built professional-grade truck and van storage in the USA for decades and is the storage brand tradespeople, contractors, and fleets reach for first. Its steel and aluminum tool boxes, ladder racks, and van-interior systems are engineered to survive daily jobsite abuse and keep expensive tools secure and organized.
Known for weather-tight seals, patented locking systems, and heavy-gauge construction, Weather Guard products mount cleanly on work trucks and vans and stand up to years of hard use. The lineup spans crossover, low-side, and saddle truck boxes, ladder and van racks, drawer units, and fuel and utility tanks, so an entire work vehicle can be outfitted from one brand.
Backed by a strong manufacturer warranty and US-based support, Weather Guard is the name pros trust to protect the tools their livelihood depends on.
Authorized Weather Guard dealer. Prestige Truck is an authorized dealer of Weather Guard, so every tool box, rack and storage product you buy is 100% genuine and factory-new, covered by the full Weather Guard manufacturer warranty, and backed by our own US-based support team.
Weather Guard Defender Series Truck Rack Install
Weather Guard's Defender Series install video shows the lightweight aluminum truck rack going onto a pickup with no drilling required. You see the compression clamps grip the bed rails and the crossbars set up to carry ladders, lumber and pipe, rated to about 800 pounds. It makes clear how quickly the rack mounts and how the ladder stops keep a load in place. It is a helpful look at the rack in place before you buy or install your own.
Weather Guard Steel Truck Rack Install
This official Weather Guard guide shows how to install a steel truck rack for hauling ladders, lumber and long loads over the bed. You watch the rack mount to the bed and get tightened down, with the load bars set for ladders and pipe. It gives a clear picture of how the rack goes on and how much it adds to a truck's hauling capability. It is the manufacturer's own reference for setting up the rack correctly.
Best Upgrade for Your Truck
This is Weather Guard's own brand film about outfitting a working pickup, built on the idea that the truck should already be loaded and organized before the day starts. It puts the bed and rail equipment in the context of a real work day rather than a spec sheet.
Watch it if you are still deciding how much storage a truck actually needs. It is the clearest short look at how Weather Guard boxes, racks and drawer units are meant to work together on one vehicle, and it comes straight from the manufacturer rather than a reseller.
Frequently Asked Questions
Straight answers on specs, fit and support
Will the 11906 fit my truck?
It is a universal aluminum headache rack for full-size pickups such as the F-150, Silverado and Sierra 1500 through 3500, Ram 1500 through 3500, Tundra and Titan. The mounting brackets and hardware are included, so you do not need a separate kit. Because the hex panel is tall, check clearance behind the cab and confirm your make and model on the Weather Guard fitment guide. It is not made for mid-size or compact trucks.
How much cab protection does the hex rack give versus the others?
The hex rack gives the most cab protection in the Weather Guard aluminum lineup. Its dense honeycomb mesh screens the whole rear window, so it blocks shifting loads, ladders and debris better than the Open Frame, Louvered or Half Bar racks. The trade-off is the smallest rear sight line, since only a compact window cutout is left open.
Does it come with the mounting hardware or do I need a separate kit?
It comes with everything to mount it. This aluminum rack includes its bed-rail brackets and hardware, unlike the older steel Protect-A-Rail cab protectors that require a separate vehicle-specific installation kit. Plan on about 30 to 45 minutes with basic hand tools, and grab a helper because the full mesh panel is the heaviest of the four.
Can I mount work lights and a beacon on it?
Yes. The rack has a built-in accessory channel that accepts Weather Guard light brackets, a cargo stop and tie-down accessories, all sold separately. That lets you add work lights, a beacon and strap points over the cab without drilling into the rack.
Will it rust?
No, it is built from corrosion-resistant aluminum with a matte black ARMOR TUF powder coat, so it stands up to rain, road salt and jobsite weather and will not rust like a steel cab guard.
Is it covered by a warranty?
Yes. The 11906-52-01 is backed by a Weather Guard Limited Lifetime Warranty against defects in materials and workmanship.
Mark K.
Look is great. 100 lbs
Look is great. 100 lbs lighter than my 2nd pick. Lid lock and opening are smooth. Only minor knock I give is the the tie down hooks are hard to install - thinking I should have done them before installing.
DECKED Tool Box, Full-Size Truck Crossbed, 71.7" x 25.5" x 16", 300 lb Lid / 800 lb Tub, Black (DTB2-BLK)
Mark
A must have
I really like this mat. I was apprehensive at first but, the mat does a great job of keeping things from sliding around without having to secure it. perfect fit. But i think i will be adding some short screws to secure the mat to the DECKED system.
DECKED Battle Mat, Full-Size Long Drawer System 6'4" to 6'9" Bed, Recycled Nyracord Rubber, Black (A0075-BMXL-BLK)
Roy L.
I never knew how much I needed this
As with all BAK covers, the quality is amazing. What I didnt fully appreciate until installing was the ease of opening - especially in a lifted truck. No more need to find the right handhold. Just roll it back with a single hand. Its also great to see out of my rear window when fully open - something you lose with the fold back covers. Customer service is awesome. I has an installation question and the representative stayed on the line as I adjusted an alignment to ensure I did it properly.
BAK Revolver X4s Hard Roll-Up Tonneau Cover for 2022-2026 Toyota Tundra (6'7" Bed)
Jeffrey P.
Better then expected.
Searched for about 6 months to find the tonneau cover. I really wanted the security of a hard top without sticking above the bed rails it checked those boxes. I also did not want to drill my truck bed. The install was super simple my wife and I had it on the truck in about a half an hour.
BAKFlip MX4 Hard Folding Tonneau Cover for 2003-2025 Ram 1500 / 2500 / 3500 (8' Bed)
Joseph A.
The toolbox is nice. I
The toolbox is nice. I think Ill get a lot of years of service out of it. I like how the lid opens and the tie downs are a nice touch. It seems to be well built. And tough. Im pleased with my purchase and would buy another one.
DECKED Tool Box, Full-Size Truck Crossbed, 71.7" x 25.5" x 16", 300 lb Lid / 800 lb Tub, Fender Dirt (DTB2-TAN)
