ATB A-DU42 Aluminum Drawer Utility Tool Box, Single Top Door, Double Drawers, T-Handle Lock
Free gifts included with your order
- No Sales TaxZero sales tax on every order
- 30-Day Money-Back GuaranteeReturn it within 30 days of delivery for a refund
Questions or a custom quote?
Mon to Fri, 9am to 5pm EST
Complete your upgrade
Fits the same truck
Features
- Aluminum Plate Build: ATB builds the A-DU42 from .090 (12g) smooth and .100 (12g) tread aluminum, fully seam welded on all seams and corners; ATB calls its drawer boxes super heavy duty.
- Straight Top With Gas Springs: The straight top has a single top hinged door, channel braced and reinforced, that open with the help of gas springs and leave a deep opening for getting cargo out.
- Double 200 lb Drawers: Two bottom drawers run on heavy duty slides; each is rated for 200 lb and has rubber matting and adjustable, removable dividers.
- Dolphin Tail T-Handle Lock: A lockable stainless steel Dolphin Tail heavy duty adjustable T-handle latch secures the doors; ATB says it is tamper resistant.
- Concealed Rain Gutter: A fully concealed rain gutter and an automotive-type weather seal help keep water and road spray out of the box.
- Stainless Continuous Hinge: Each door swings on a stainless steel continuous hinge that runs the full length of the door, on a smooth aluminum body with diamond tread plate doors.
Description & Fitment
The ATB A-DU42 is an aluminum drawer utility box with a straight top, a single top hinged door and two bottom drawers for decks, flatbeds and service bodies. It is built from .090 smooth and .100 tread aluminum and fully seam welded. The doors open on gas springs and lock with a stainless steel Dolphin Tail T-handle latch, and each drawer is rated for 200 lb. It is made in the USA.
Fitment & Compatibility
How to choose: measure the flat mounting area on your deck or flatbed (the width you can spare, the depth front to back) and the height you can allow above the deck, then pick a size that fits with room for the doors to open.
The 21" tall boxes have 7.75" drawers and come 14" or 16" deep; the 28" tall boxes have 9.75" drawers and come 20" deep. Widths: 48", 60". The version table lists drawer width, door opening and weight for each size.
ATB sells the mounting kit separately; it lists M3200D-DU2 as the standard kit for this double drawer box.
Fits: Flatbeds, decks and service bodies; top mount on a flat surface (check the size table)
About ATB
American Truckboxes (ATB) builds aluminum and steel truck boxes, tanks and storage in Blanchard, North Dakota, and has done so for more than 25 years, by its own account. Its range covers pickup crossover, side-mount, chest and drawer boxes, service-truck boxes and packs, fuel tanks, and heavy-truck and trailer boxes.
Authorized ATB dealer. Prestige Truck is an authorized ATB dealer: every box on this page is built by ATB to the part number shown.
Frequently Asked Questions
Will it fit my truck?
The A-DU42 top mounts on a flat surface such as a flatbed, deck or service body. Compare the box width, depth and height with your mounting area, allow for the weight of the box and its contents, and contact us if you want a second check.
Does the A-DU42 come with a mounting kit?
No. ATB sells the mounting kit separately; it lists M3200D-DU2 as the standard kit for this double drawer box. Contact us and we can add the kit to your order.
How much weight can a drawer hold?
ATB rates each drawer for 200 lb. The drawers ride on heavy duty slides and come with rubber matting and adjustable, removable dividers.
How do I measure for a drawer utility box?
Measure the flat area where the box will sit: the width you can give it, the depth front to back and the height you can allow above the deck. Then check the box weight and door opening in the version table before you pick a size.
Will it keep water out?
The doors close over a fully concealed rain gutter with an automotive-type weather seal, which ATB uses to keep its drawer boxes water-tight.
Can I pair it with other ATB top mount boxes?
Yes. ATB says its DU Series drawer boxes can be used together with its CGD and DM Series top mount boxes. An inside shelf is also offered as an option; contact us if you want one.
Installation
- 1/2" ratchet wrench
- 1/2" wrench
- Tape measure
- Drill with 3/8" bit
Here's the short version. Follow ATB's install sheet (below) for your truck's exact positions and hardware.
- Check all parts against the parts list and look over the mounting area to make sure there is room for the box.
- Set the box on the flat surface where it will mount to confirm the fit. The box has no predrilled holes; drill as close to the outside edges of the box as possible.
- Remove the box, mark four holes on the outside bottom of the box and drill them with a 3/8" bit.
- Set the box back in position and mark the drilled hole pattern onto the mounting surface.
- Remove the box and drill four 3/8" holes at the marks, following the truck maker's shop manual for drilling.
- Insert the bolts with washers from the box side through the mounting surface, add a flat washer and lock nut underneath, and tighten all nuts securely.
Stuck on a step?
- A-DU42 drawer utility box
Specifications
| Brand | ATB |
|---|---|
| Series | A-DU42 |
| Type | Drawer utility box, straight top |
| Material | Aluminum,.090 (12g) smooth and.100 (12g) tread |
| Construction | Fully seam welded on all seams and corners |
| Finish | Smooth aluminum body, diamond tread plate doors |
| Doors | One top hinged, channel braced, gas springs, stainless steel continuous hinge |
| Drawers | Two, 200 lb each, heavy duty slides, rubber matting, adjustable dividers |
| Lock | Lockable stainless steel Dolphin Tail T-handle latch |
| Weather seal | Fully concealed rain gutter, automotive-type seal |
| Mounting | Top mount; kit sold separately (M3200D-DU2) |
| Made in | USA |
| Part number | A-DU42-211448SD-T |
| Part # | Size | Drawer height | Drawer width | Door opening | Weight |
|---|---|---|---|---|---|
| A-DU42-211448SD-T | 21"H x 14"D x 48"W | 7.75" | 23-1/8" | 9-1/8" H x 44-1/2" W | 92 lb |
| A-DU42-211460SD-T | 21"H x 14"D x 60"W | 7.75" | 29-1/8" | 9-1/8" H x 56-1/2" W | 112 lb |
| A-DU42-211648SD-T | 21"H x 16"D x 48"W | 7.75" | 23-1/8" | 9-1/8" H x 44-1/2" W | 102 lb |
| A-DU42-211660SD-T | 21"H x 16"D x 60"W | 7.75" | 29-1/8" | 9-1/8" H x 56-1/2" W | 125 lb |
| A-DU42-282048SD-T | 28"H x 20"D x 48"W | 9.75" | 23-1/8" | 14-1/8" H x 44-1/2" W | 140 lb |
| A-DU42-282060SD-T | 28"H x 20"D x 60"W | 9.75" | 29-1/8" | 14-1/8" H x 56-1/2" W | 167 lb |
Warranty, shipping & returns
-
Warranty
ATB covers its standard truck boxes with a 60-month (5-year) limited warranty for the original purchaser; it is not transferable.- For a warranty claim, contact us with your order number and photos and we will work it through with ATB.
-
Shipping
Ships by freight from the ATB factory in Blanchard, ND; lift-gate delivery available.- Alaska, Hawaii and Canada: contact us for a freight quote before you order.
- We email your tracking details as soon as it ships.
-
Inspect on delivery
Check the box when the freight arrives, before the driver leaves: look over the lids, doors, corners and welds for dents, scratches or shipping damage. Note any damage on the delivery receipt and send us photos. Check it as soon as it arrives.- Look for crushed ends, punctures or tears in the carton.
- If something looks wrong, take photos of the box and the parts (and if a driver asks you to sign, note the damage on the receipt).
- Open the box and check the parts against the parts list before you install.
- Email support@prestigetruck.com right away with your order number, a short note and photos. We send a replacement or a full refund at no cost to you.
-
30-day returns
Return it within 30 days of delivery, unused, in the original packaging, with proof of purchase.- Email support@prestigetruck.com with your order number. We reply within 1-2 business days with instructions.
- Damaged, defective or wrong item: we send a prepaid label or arrange a pickup.
- Changed your mind: you pay return shipping. No restocking fee.
- Refunds go back to your original payment method within 7 business days of approval. See our returns policy.