Extang Trifecta 2.0 Soft Folding Tonneau Cover for 2011-2026 Ram 1500 / 1500 Classic / 2500 / 3500 (6'4" Bed, with RamBox and Silver Cargo Rails)

The Extang Trifecta 2.0 is a soft folding tonneau cover that pairs a heavy-duty leather-grain vinyl tarp with an aircraft-grade aluminum frame finished in textured black EnduraCoat. It succeeds the original Trifecta and sits low on the bed with rounded edges. Four clamps, Jaw-Grip at the front and EZ-Lock at the rear, grip the bed rails by hand with no drilling. With the rear pair released the panels stack forward against the cab, leaving two-thirds of the bed open. Snap-on triple-fin seals close the gaps at the rails, bulkhead and tailgate against rain, snow and debris. It suits owners who want the bed covered daily and the cover off in seconds when a tall load calls for it. Part number 92426 is the 6'4" bed application for the 2011-2026 Ram 1500 / 1500 Classic / 2500 / 3500, with RamBox and Silver Cargo Rails.

What's Included:

• Trifecta 2.0 soft folding cover with leather-grain vinyl tarp on an aluminum frame
• Jaw-Grip front clamps
• EZ-Lock rear clamps
• Snap-on triple-fin seals for the rails, bulkhead and tailgate
• Integrated buckle straps to hold the cover open
• Mounting hardware and the Extang install sheet

Features

Tool-Free Clamps, No Drilling
Jaw-Grip clamps at the front and EZ-Lock clamps at the rear bite onto the inside of the bed rail with no tools and no drilling. The same clamps release the cover for removal in seconds when a load needs the full bed.

Two-Thirds Bed Access, Open While Driving
Two thirds of the bed opens up once the rear clamps let go and the stack folds toward the cab. Two integrated buckle straps hold it there so you can drive with it open. Clip both before you pull out.

Leather-Grain Vinyl That Stays Taut
The tarp is marine-grade vinyl with a leather-grain texture and it resists moisture. Extang's patented corner-tuck system keeps the fabric under tension through hot and cold swings, so it stays flat and low rather than going slack.

Triple-Fin Seals at Every Edge
Snap-on triple-fin seals run along the bed rails, across the bulkhead and at the tailgate. They clip on with no adhesive at all and block seepage at the three places where the cover meets the truck.

Aluminum Frame With MaxHinges
The redesigned frame is aircraft-grade aluminum, light enough to fold by hand yet stiff enough to hold the tarp flat, coated in textured black EnduraCoat. Dual-pivot MaxHinges strengthen the pivot points, the spot where a folding cover takes the most wear.

Versions for Factory Bed Systems
Separate versions exist for trucks with RamBox storage, Utili-track, deck rail systems, CarbonPro beds or a cargo management system, plus standard beds without them. Choose the option that matches your truck so the clamps and seals land where they should.

Fitment & Compatibility

Specifications

• Cover Type: Soft folding
• Material: Leather-grain vinyl tarp over an aluminum frame
• Finish: Vinyl grain tarp, textured black EnduraCoat frame
• Bed Access: Two-thirds folded open, full with tool-free removal
• Sealing: Adhesive-free snap-on triple-fin seals at rails, bulkhead and tailgate
• Clamps: Jaw-Grip front, EZ-Lock rear, no tools needed
• Hinges: Dual-pivot MaxHinges
• Tarp Tension: Patented corner-tuck system
• Open Position: Held by two integrated buckle straps
• Profile: Low profile, rounded edges
• Drilling Required: No
• Install Time: Less than 1 hour
• Fits: 6'4" bed, see fitment table
• Weight: About 39 lb
• Install Difficulty: Level 1, simple
• Warranty: Limited lifetime

Installation

Type: Clamp-on, no drilling · Time: Less than 1 hour · Tools: None, the clamps tighten by hand · Difficulty: Level 1, simple

Installation is clamp-on with no drilling. The Jaw-Grip front clamps and EZ-Lock rear clamps grip the inside lip of the bed rail by hand, so there are no tools and no holes to make. Extang rates it Level 1, its simplest grade, at under an hour and includes the hardware and the install sheet in the box. Check that all four clamps are tight before you drive.

Watch the installation walkthrough:

Resources

Everything you need for your Extang Trifecta 2.0 Soft Folding Tonneau Cover for 2011-2026 Ram 1500 / 1500 Classic / 2500 / 3500 (6'4" Bed, with RamBox and Silver Cargo Rails), in one place.

• Official Extang Trifecta 2.0 Soft Folding Tonneau Cover for 2011-2026 Ram 1500 / 1500 Classic / 2500 / 3500 (6'4" Bed, with RamBox and Silver Cargo Rails) installation guide (PDF), the manufacturer's step-by-step guide covering mounting, included hardware and adjustment.

Warranty, Shipping & Returns

Warranty. Extang covers the Trifecta 2.0 with a limited lifetime warranty against defects in materials and workmanship on the rails, aluminum parts, clamps, bows, hardware and vinyl, for the original purchaser with a registration on file or a dated receipt. Cargo touching the tarp voids it, as does driving with the panels unsecured or folding the cover open before snow and ice are cleared off the top. Silicone vinyl conditioners such as Armor All, wind whip from a tarp left loose at speed and towing the truck from the rear void it as well, alongside accident damage, misuse, improper installation, modifications and normal wear. Approved claims are repaired or replaced at Extang's option once a return authorization number is issued, with shipping to Extang paid by the owner.

Free shipping. This item ships free to the lower 48 states. Because it is an oversized item, it ships by freight or oversized parcel and typically arrives in 3 to 7 business days.

Inspect on delivery. Please inspect the packaging before signing. If you see any damage, note it on the delivery receipt and contact us right away, and we will make it right.

About Extang

Extang builds tonneau covers for pickup beds, and the Trifecta is its soft folding line. The Trifecta 2.0 arrived as the successor to the original Trifecta, carrying a redesigned aluminum frame, dual-pivot MaxHinges reinforcing the pivot points and a patented corner-tuck system that holds tension in the vinyl tarp.

Much of what Extang builds carries its own name. Jaw-Grip and EZ-Lock are its tool-free clamp designs, MaxHinges are its dual-pivot hinges, EnduraCoat is the textured black finish on its aluminum frames and the corner-tuck system is its patented way of keeping a vinyl tarp tight in changing temperatures. All of them are on the Trifecta 2.0.

Extang backs the Trifecta 2.0 with a limited lifetime warranty on the frame, clamps, bows, hardware and vinyl. It supports the cover with model-specific install sheets, install videos and its own Tonno Tonic vinyl cleaner. The Trifecta line has grown into several versions, including the canvas Trifecta Signature 2.0, the Trifecta e-Series, the Trifecta ALX and the Trifecta Toolbox 2.0.