Weather Guard's DRMSAF dual rail kit adds a folding-shelf spot on the driver-side front wall, just behind the cab, of any wheelbase Mercedes-Benz Sprinter. Two aluminum rails, about 54" apiece, locate on the Mercedes-Benz Sprinter's factory reinforced holes for a no-drill mount that spreads the folding-shelf load across the wall. Any Weather Guard folding shelf (36, 48 or 60") bolts on, and the kit is matched to medium and high roof Sprinter models. Aluminum means no rust and almost no payload penalty, with the folding shelf bought on its own. Built in the USA and backed for life.
What's Included:
Weather Guard dual rail shelf mounting kit for the Mercedes-Benz Sprinter (any wheelbase)
Pair of extruded aluminum mounting rails
Mounting hardware that uses existing reinforced wall holes
Weather Guard installation instructions
Note: Weather Guard folding shelves are sold separately
Features
No Drilling Into the Floor The rails use the existing holes in the reinforced sections of the van wall, so you mount folding shelving without drilling into the vehicle floor, keeping the van's structure and warranty intact.
Custom-Fit for the Sprinter This kit is cut specifically for the Mercedes-Benz Sprinter (any wheelbase) and its standard and high roof models, so the rails line up with the factory mounting points for a clean, secure install.
Mounts Any Weather Guard Folding Shelf The rails accept any size Weather Guard folding shelf at the driver-side front location, so you can add the 36", 48" or 60" unit that fits your load.
Extruded Aluminum, Load-Distributing Lightweight extruded aluminum resists corrosion and spreads the shelf load across the reinforced wall points for a secure, rattle-free hold that will not eat into your payload.
Quick, Flexible Install Weather Guard rates the rail kit at about half an hour to fit, and because the rails run the length of the reinforced wall section you can set the shelf height and fore-aft position to suit your load rather than being locked to one spot.
Fitment & Compatibility
Van
Configuration
Fit
Mercedes-Benz Sprinter
Standard and high roof, driver-side front location
✓ Yes, direct fit
Weather Guard folding shelves
Required companion, sold separately
● Sold separately
Fit guidance: This dual rail kit is specific to the Mercedes-Benz Sprinter (fits any wheelbase for the driver-side front location) and its standard and high roof models, mounting at the driver-side front location. It is one half of a folding-shelf install: pair it with a Weather Guard folding shelf (sold separately). Confirm your van's exact wheelbase and roof height, and the shelf location you want, before ordering.
Specifications
Type: Dual rail folding-shelf mounting kit (pair of rails)
Vehicle: Mercedes-Benz Sprinter, any wheelbase
Roof Fit: Standard and high roof models
Mounting Location: Driver-side front
Rail Length: about 54" (per rail, approx)
Material: Extruded aluminum
Install: Uses existing reinforced wall holes, no floor drilling
Product Dimensions: About 0.77"W x 6"D x 1.625"H x 53.4"L
Product Weight: About 4.588 lb
Shipping Dimensions: About 56.4"L x 7.2"W x 6"H
Install Time: About 0.5 hours
Warranty: Limited Lifetime
Made In: USA
Installation
Type: Extruded aluminum dual rail kit using existing reinforced wall holes · Time: About 20 to 30 minutes · Tools: Socket/wrench set, tape measure; no drilling into the floor · Difficulty: Easy to moderate
Locate the existing holes in the reinforced sections of the van wall, then bolt the two rails in place per the instructions. Once the rails are set, the Weather Guard folding shelf bolts to them. The official dual rail install video is the clearest reference.
Watch the installation walkthrough:
Warranty, Shipping & Returns
Warranty. Weather Guard Limited Lifetime Warranty against defects in materials and workmanship.
Free shipping. This item ships free to the lower 48 states. Because it is an oversized item, it ships by freight and typically arrives in 3 to 7 business days.
Inspect on delivery. Please inspect the packaging before signing. If you see any damage, note it on the delivery receipt and contact us right away, and we will make it right.
About Weather Guard
Weather Guard has built professional-grade truck and van storage in the USA for decades and is the storage brand tradespeople, contractors, and fleets reach for first. Its steel and aluminum tool boxes, ladder racks, and van-interior systems are engineered to survive daily jobsite abuse and keep expensive tools secure and organized.
Known for weather-tight seals, patented locking systems, and heavy-gauge construction, Weather Guard products mount cleanly on work trucks and vans and stand up to years of hard use. The lineup spans crossover, low-side, and saddle truck boxes, ladder and van racks, drawer units, and fuel and utility tanks, so an entire work vehicle can be outfitted from one brand.
Backed by a strong manufacturer warranty and US-based support, Weather Guard is the name pros trust to protect the tools their livelihood depends on.
Authorized Weather Guard dealer. Prestige Truck is an authorized dealer of Weather Guard, so every tool box, rack and storage product you buy is 100% genuine and factory-new, covered by the full Weather Guard manufacturer warranty, and backed by our own US-based support team.
Weather Guard Van Upfit Gear Overview
This official Weather Guard overview tours the van upfit gear built for pros, including the folding shelves these rails are made to carry. It is a helpful big-picture look at how the dual rail kit and folding shelves work together as a system, along with flooring and locking bins, so you can plan a complete upfit.
Assembling the Folding Shelves These Rails Carry
Since this dual rail kit exists to mount Weather Guard folding shelves, this official assembly guide is useful companion viewing. It walks through setting up the folding shelves and how the removable endcaps join units, so once your rails are installed you know exactly how the shelves go on.
Maximize Your Van Storage with Weather Guard Folding Shelves
This Weather Guard feature video shows why folding shelves earn their space: flip them down for a work surface, flip them up to carry tall or bulky loads in the same bay.
It is good context for how the shelves change the van day to day, rather than how they bolt in.
Frequently Asked Questions
Straight answers on specs, fit and support
Which van does the DRMSAF dual rail kit fit?
It is cut for the Mercedes-Benz Sprinter with the any wheelbase in medium and high roof, and it mounts folding shelves at the driver-side front location, just behind the cab. Confirm your wheelbase and roof height before ordering.
Do I have to drill into my van?
No drilling into the floor. The two rails, about about 54", use the existing reinforced holes in the Mercedes-Benz Sprinter wall, so they bolt to factory points and spread the shelf load without cutting the body.
Are the folding shelves included?
No. This kit is the mounting rails only; Weather Guard folding shelves are sold separately. Add the 36, 48 or 60" folding shelf for your Mercedes-Benz Sprinter any wheelbase and location to finish the install.
Can I mount any size folding shelf on it?
Yes. The rails accept any size Weather Guard folding shelf at the driver-side front location, so pick the shelf length that suits your Mercedes-Benz Sprinter.
Is this a front or rear location kit?
This is a front kit, sized to add a folding-shelf location on the driver-side front wall, just behind the cab. For the rear driver or passenger locations, use the matching rear dual rail kit for your van.
Is it made in the USA and backed by a warranty?
Yes. Weather Guard builds this in the USA and backs it with a Limited Lifetime Warranty against defects in materials and workmanship. Keep your receipt as proof of purchase for any future claim.
Mark K.
Look is great. 100 lbs
Look is great. 100 lbs lighter than my 2nd pick. Lid lock and opening are smooth. Only minor knock I give is the the tie down hooks are hard to install - thinking I should have done them before installing.
DECKED Tool Box, Full-Size Truck Crossbed, 71.7" x 25.5" x 16", 300 lb Lid / 800 lb Tub, Black (DTB2-BLK)
Mark
A must have
I really like this mat. I was apprehensive at first but, the mat does a great job of keeping things from sliding around without having to secure it. perfect fit. But i think i will be adding some short screws to secure the mat to the DECKED system.
DECKED Battle Mat, Full-Size Long Drawer System 6'4" to 6'9" Bed, Recycled Nyracord Rubber, Black (A0075-BMXL-BLK)
Roy L.
I never knew how much I needed this
As with all BAK covers, the quality is amazing. What I didnt fully appreciate until installing was the ease of opening - especially in a lifted truck. No more need to find the right handhold. Just roll it back with a single hand. Its also great to see out of my rear window when fully open - something you lose with the fold back covers. Customer service is awesome. I has an installation question and the representative stayed on the line as I adjusted an alignment to ensure I did it properly.
BAK Revolver X4s Hard Roll-Up Tonneau Cover for 2022-2026 Toyota Tundra (6'7" Bed)
Jeffrey P.
Better then expected.
Searched for about 6 months to find the tonneau cover. I really wanted the security of a hard top without sticking above the bed rails it checked those boxes. I also did not want to drill my truck bed. The install was super simple my wife and I had it on the truck in about a half an hour.
BAKFlip MX4 Hard Folding Tonneau Cover for 2003-2025 Ram 1500 / 2500 / 3500 (8' Bed)
Joseph A.
The toolbox is nice. I
The toolbox is nice. I think Ill get a lot of years of service out of it. I like how the lid opens and the tie downs are a nice touch. It seems to be well built. And tough. Im pleased with my purchase and would buy another one.
DECKED Tool Box, Full-Size Truck Crossbed, 71.7" x 25.5" x 16", 300 lb Lid / 800 lb Tub, Fender Dirt (DTB2-TAN)
